Full Answer
What are the lights on a golf cart called?
Similar to car or truck lighting, headlights on a golf cart produce yellow or white light, whereas brake lights are colored red. The system of wires, fuses, and resistors that produces a stable electrical system. This circuit provides power to a majority of your cart’s electrical functions.
Is there a brake light switch for a golf cart?
This Golf Cart Brake Light Switch is designed for installation on ALL GOLF CARTS, INCLUDING CLUB CAR, EZ-GO & YAMAHA GOLF CARTS. It's very easy for regular folks to install to the existing brake pad to turn your rear lights into brake lights.
How do I check my golf cart’s circuit wiring?
In order to check your golf cart’s circuit wiring you should refer to the wiring diagram included in your golf cart’s user manual. If you bought or received your golf cart second hand and you do not have the cart’s user manual, you can find the wiring diagram on the internet.
Can you drive a golf cart on the street with lights?
The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality. What is the deal with Club Car Precedent 2004-2008.5 and 2008.5+ light kits?
How do you turn on a golf cart light?
Plug the electrical plug into the 12v socket if your golf cart has a normal AC outlet. If your golf cart has a DC outlet (the cigarette lighter outlet) then pull the lighter plug out and put in the DC to AC converter plug. Then plug the LED Christmas light plug into the 12v socket on the inverter plug.
What is the switch on a golf cart?
For example, there is a micro switch located on the accelerator pedal. This switch activates when you push the pedal and sends a signal to the solenoid. When this happens, your cart knows that you are ready to accelerate and will send more power to your wheels to get them to move.
Why are my lights not working on my golf cart?
A blown-out headlight fuse is the main reason that your EZGO RXV golf cart lights are not working. An incorrect circuit connection to the headlight fuse can also cause the lights to stop working. There are times when the circuit wires are torn or worn out.
How does a golf cart ignition switch work?
The ignition switch on a golf cart is crucial for getting the vehicle started and operating as smoothly as possible. It pulls electricity from the battery and sends a charge to the engine that gets your cart running.
Where is the direction switch on a golf cart?
0:3011:38If you have any of those symptoms. Most likely that your forward reverse switch. Which is locatedMoreIf you have any of those symptoms. Most likely that your forward reverse switch. Which is located right there. This is what makes your golf cart go forward or reverse.
How do you test a golf cart switch?
Use a multimeter to check if all the parts are getting power. Place your foot on the car's brake, insert the key, and put the forward-reverse key in the forward position. If you see that the solenoid charges up pushing the pedal, then your forward reverse switch is working fine.
Do golf carts have headlights?
If you plan to drive your golf cart on the street, you are probably already aware that you will need golf cart lights installed on your cart to do so! A golf cart light kit, including headlights, taillights and turn-signals, is required in most towns for road-going use.
Where is the fuse box on a club cart?
Locate the service panel of the golf cart. This is usually found behind the battery on the driver's side on the rear fender. Make a note of the current ratings supported for each fuse at the highest voltage.
Are there fuses in a Club Car golf cart?
Club Car carts are like Yamaha and EZGO in that they have their fuse boxes in pretty specific locations that make them easier to access and repair. For example, those who may still be rocking a 1986 CC DS gas Club Car cart – and we envy you if you've got that baby still running – has the fuse box behind the dash.
How do you replace the ignition switch on a golf cart?
Fortunately, it is very easy to install and replace the switch. It is both inexpensive and quick (around ten minutes). There are just four steps: Get the right equipment, prepare the golf cart, remove the console and the existing ignition switch, and lastly, install a new ignition switch and replace console.
How do you check the igniter on a E-Z-GO golf cart?
Take the voltmeter's black and red probe and place it on the –ve and +ve terminal of the coil. Take the readings. It should be between 3.7-5.2 ohms. If outside the range, the coil should be replaced.
How do you test a ignition switch?
4:076:01And make sure when I ground it out and any other position besides off. So as you can see on doesMoreAnd make sure when I ground it out and any other position besides off. So as you can see on does open that connection back up as well as your starting position.
What is the lighting system on a golf cart?
Your golf cart’s lighting system is composed of various parts. Each of these parts works together to produce a working electrical circuit that provides a current to your vehicle’s headlights and brake lights (if your vehicle is equipped with them). The most obvious parts of your vehicle’s lighting system are the headlight and brake light bulbs. These parts of the system are responsible for producing light. In addition to the actual bulbs, the lighting system is also composed of fuses and the lighting switch.
Why aren't my golf cart lights working?
The main reasons golf cart head lights don’t work are blown out bulbs, dead battery’s, faulty wiring, bad headlight switch, bad voltage reducer or a blown fuse. These are all easy to troubleshoot, and very easy to fix. Your golf cart’s lights may prove faulty for a variety of other reasons.
What causes a golf cart to not light up?
Troubleshooting Your Golf Cart’s Faulty Headlights. 1. Blown Fuse on your Golf Cart Headlights. Problems with a golf cart’s headlights are commonly linked to a blown-out headlight fuse. A blown headlight fuse will cause your vehicle’s headlights to not receive the power necessary for them to produce light.
Why do my golf cart headlights stop working?
The third reason for a golf cart’s headlights to stop working is a faulty headlight switch. Sometimes this switch will not receive enough current causing the switch to fail. When this switch fails there is no way for the golf cart operator to activate the vehicle’s headlights.
How many terminals do you need to connect your golf cart headlights to?
These wiring for a cart’s headlights should only be connected to two battery terminals; any additional connections will cause the headlights to blow immediately. In order to check your golf cart’s circuit wiring you should refer to the wiring diagram included in your golf cart’s user manual.
What is the difference between headlights and brake lights?
The actual part that produces light for the vehicle. Similar to car or truck lighting, headlights on a golf cart produce yellow or white light, where as brake lights are colored red. Electrical Circuit. The system of wires, fuses, and resistors that produces a stable electrical system.
What are the parts of a vehicle's lighting system?
The most obvious parts of your vehicle’s lighting system are the headlight and brake light bulbs. These parts of the system are responsible for producing light. In addition to the actual bulbs, the lighting system is also composed of fuses and the lighting switch.
What to do before taking a golf cart out on the street?
The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality.
How many volts does a golf cart take?
Even the most basic voltage reducer will do the job, taking 16,18, 36 or 48 volts down to 12. Check out Golf Cart Voltage Reducers for more information.
Why are my lights blown out?
If the voltage reducer was hooked up improperly, the lights may have been blown out due to over-voltage. What you will need to do is check what voltage your cart is running at. Because all electrical accessories run on 12V, and the reducer's job is to take higher voltages down to 12V.
What happens if you don't hook up a golf cart?
If you own a 48V or 36V golf cart, and if you do not install or properly hook up a voltage reducer, you will put too much voltage through your lights, resulting in blown lights (and generally voiding all warranties - see blown board image below).
Do you have to engage the parking brake on a gas golf cart?
Yes. If you have a gas golf cart, you will need to engage the parking brake prior to installation. This ensures that your golf cart stays put while you’re working on it. I’ve hooked up the light kit and voltage reducer, but some of the lights are not coming on or came on for a minute and went off.
Should a golf cart be in the TOW position?
Your golf cart should always be in the TOW position when installing electrical accessories such as lights. I want to upgrade my headlights and taillights and already have the holes/cut-outs where the lights should go on my cart.
Where is the brake light on a golf cart?
The brake light switch is mounted below the Club Car’s pedal. You will have to remove the floor mat to access it. Most people buying a Club Car do not give much thought to the brake lights. The brake light switch does not form part of the light kit if you have ordered one. This is one reason Club Car golf cart users are surprised when ...
What to do if golf cart brake light doesn't turn on?
Check the Bulb. This is a no-brainer. If a light does not turn ON, you would check the bulb immediately. In the case of the brake lights in a Club Car golf cart, there are two brake lights at the rear and if both don’t light up, the problem could be elsewhere.
Why do brake lights stay on in a club car?
The other reason for the brake lights staying on in a Club Car is the floor mat blocking the brake pedal from gaining its position back. If it remains pressed, the brake lights could stay ON. You can also confirm if the relay is a timed one, in which case, the brake lights will stay ON for a while before switching OFF.
Why isn't my golf cart brake light working?
The frequently reported reasons for the brake light not working in a Club Car golf cart is either a faulty brake light switch or loose wiring. You have to check these two first before moving on to anything else. A faulty light bulb. Loose or disconnected wires. Faulty brake light switch.
What color wires are used for brake lights?
Also take note of the extra wires coming from the light kit harness. These are usually of four colors – green, red, orange, and blue. Make sure the green and blue wires are connected.
What is the part number for the brake light on a Club Car DS?
If the brake light kit you ordered for your Club Car DS golf cart carries part No. LGT-641, you have the details above. If the kit is different, the wiring diagram may have the following details.
Why aren't my taillights working on my club car?
The reason why the taillights on a Club Car golf cart are not working is because the bulbs are not receiving power. A voltmeter will be required to check if power is available. The other method is to use a 12V jumper on the bulbs. If they light up, then there is no issue with the taillights.
