Full Answer
What is an EZGO golf cart controller?
Known as the heart of the EZGO golf cart, the controller’s core objective is to control the speed of the golf cart. It is a needed component in a AC and brushless DC motor.
Is there an AC motor controller for the EZGO RXV?
And we have done it again! We have developed an AC motor controller upgrade kit using a 450 amp Curtis Instruments AC motor controller (1234E-5421) to increase the performance of the EZGO RXV golf car. This kit wakes up the EZGO RXV allowing the vehicle to be much more responsive, quicker, and lot more fun to drive.
What's included in the E-Z-GO RXV golf car?
Included in this kit is the new Curtis Instruments AC motor controller, a controller mounting plate, a Curtis Instruments 3140 LCD digital display, a resistor regen controller, and all of the other associated items needed to add performance to the E-Z-GO RXV golf car.
Why is the tow run switch on my EZGO cart not working?
The tow run switch is damaged. Many times, the speed controllers of an EZGO cart are damaged or broken. These speed controllers are located under the EZGO cart seat. Check the speed controller’s attachment near the carburetor. Reach the engine area of the cart by lifting the cart seat. Locate the speed controller on the engine.
Where is the controller on EZGO golf cart?
All EZ-GO speed controllers are equipped with a maintenance switch that needs to be flipped before you begin work on repairing the problem. You will likely find the switch under the seat of your golf car,t but if you're having trouble finding it, consult your owner's manual.
How do I know if my EZGO controller is bad?
Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery. If the motor is not turning, the problem may be in the directional switch or motor. If there is no voltage, the controller is bad and must be replaced.
Where is the speed controller on electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
How do you know if you have a bad controller on golf cart?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
How do I reset my EZGO RXV?
Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button. Push the button to reset the motor.
How can I test my speed controller?
0:395:30Testing controller for blown mosfetts - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe start by connecting one of the probe to the ground wire of the controller. And you take theMoreWe start by connecting one of the probe to the ground wire of the controller. And you take the positive probe.
Where is the speed sensor on a ezgo golf cart?
The speed sensor on an EZGO TXT golf cart is located close to the motor. This sensor is present on the rear side of the motor on the driver's side of the golf cart.
How do you change the speed on a EZGO electric golf cart?
Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.
How do you bypass a golf cart controller?
1:594:09electric golf cart, simple Motor and controller bypass key hotwire direct ...YouTubeStart of suggested clipEnd of suggested clipSo let's just go ahead and bypass the solenoid by putting one alligator clip on that bolt.MoreSo let's just go ahead and bypass the solenoid by putting one alligator clip on that bolt.
How do you reset a golf cart controller?
Easily Reset the Club Car Golf Cart OBCKey switch to off.Set forward/reverse to neutral.Put tow/run switch to tow.Disconnect the negative battery terminal from the battery pack.Put the tow/run switch to run.Put forward/reverse switch to reverse.Put key switch to on.More items...
How do you test a motor controller?
How to Test an Ebike Controller at HomeStep 1: Connect your controller to the battery.Step 2: Set the multimeter reading. ... Step 3: To test for continuity, set your multimeter to continuum. ... Step 4: Test every line that comes out of the controller. ... Step 5: Set your multimeter to resistance mode to test for resistance.More items...•
What is the controller on a golf cart?
The controller meters out current and voltage on your battery based on user input, whether that be a gas pedal, a throttle, or even pedals on a bicycle. With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.
How do I test my EZ GO 36v controller?
This can Also be tested by putting a test lead on each small terminal and pressing the gas pedal. The meter should read 36 V when the gas is pressed. If this voltage does exist when the gas pedal is pressed then the solenoid should click and engage.
How do you test a ezgo directional switch?
Check all the connections and make sure each part is getting power by using the multimeter. Have your foot firmly on the brake, put in the key, and the F/R switch in the forward position. When you push the go pedal if the solenoid charges up then your EZGO F/R switch is good to go.
What does a controller do in a golf cart?
The controller meters out current and voltage on your battery based on user input, whether that be a gas pedal, a throttle, or even pedals on a bicycle. With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.
How do you check the ezgo inductive throttle sensor?
Identify the six- or 10-pin connector and carefully pull it out so that you can measure the pins. Put the key in the “On” position in your Run/Tow switch on the cart. Switch the F/R switch into a forward position to test your cart. Place your voltimeter testing pins on the throttle pins to see how much voltage you get.
Where is the maintenance switch on an EZ Go golf car?
You will likely find the switch under the seat of your golf car,t but if you’re having trouble finding it, consult your owner’s manual.
Why is my golf cart not turning?
The two possible problems you can identify this way is either a bad speed controller, or a bad directional switch or motor. If the motor on your golf cart doesn’t turn, the problem is probably the directional switch/motor, but if there is no voltage at all on your reading, you’ll need to replace your speed controller.
What is Garrett's drive system?
All modern golf carts (Including any cart that is sold by Garrett’s) use the precision drive system or PDS, whereas older carts made before 1994 will use a drive control system. These devices control the acceleration and overall speed of the golf cart, so when they’re not working properly it’s important to know what to do.
How to test solenoid on a cart?
To test your cart’s solenoid, you’ll want to take a reading of the voltage and compare it to the reading you got off your battery. Att ach the positive probe to the solenoid post nearest the battery and get the reading. If the solenoid and battery readings are identical, there is an issue with the solenoid.
Is a speed controller reliable?
Speed controllers (especially modern ones) are pretty reliable and hopefully you won’t have to deal with this problem . If you do, we hope you can use the steps in this article to help you identify and fix the issue.