Full Answer
What is an EZGO golf cart controller?
Known as the heart of the EZGO golf cart, the controller’s core objective is to control the speed of the golf cart. It is a needed component in a AC and brushless DC motor.
Does EZ-GO work with RXV software?
You're right, the dealers don't have much experience with the RXV software. They got EZ-Go on the phone for about 20 mins and everything worked fine. Mine is a little less complicated than the Freedom, but they were able to set the speed to "high" and the accelleration to high as well.
How do you test an EZGO controller?
How to test a EZGO controller Connect the battery pack negative post to the negative of the meter probe. Connect the battery pack positive post to the positive of the meter probe. Switch on and then put the gear in forward, and then put the positive of the meter probe on the solenoid’s battery side.
How do I upgrade my EZGO Curtis golf cart?
The EZGO Curtis has the Sepex drive system. Generally, the major upgrades are a larger solenoid or a motor, or a controller. A controller upgrade can increase the speed and performance of the entire golf cart. For this, an external handheld device can change the settings.
Where is the EZ Go speed controller located?
These speed controllers are located under the EZGO cart seat. Check the speed controller's attachment near the carburetor.
How do you check the controller on an ezgo golf cart?
Connect the negative probe to the controller's M terminal and positive probe to the B+ terminal. Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery. If the motor is not turning, the problem may be in the directional switch or motor.
How do I reset my EZ Go RXV?
Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button. Push the button to reset the motor.
How do I reset my EZ Go controller?
Reset the battery cable Unplug the negative battery cable (the black wire) before beginning any work on the speed controller. Once disconnected, you should remove the speed controller cover and then reconnect the negative cable.
How do I know if my golf cart controller is bad?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
What is the controller on a golf cart?
The controller meters out current and voltage on your battery based on user input, whether that be a gas pedal, a throttle, or even pedals on a bicycle. With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.
Where is the reset button on my golf cart?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again.
How do you unlock Rxv brakes?
Release Motor Brake On An EZGO RXV When Batteries Have PowerPut your golf cart key in the neutral position.Lift the front seat.Switch the golf cart tow/run switch to tow.This will allow your golf cart to roll and turns off the motor brake.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
How do you bypass a golf cart controller?
1:594:09electric golf cart, simple Motor and controller bypass key hotwire direct ...YouTubeStart of suggested clipEnd of suggested clipSo let's just go ahead and bypass the solenoid by putting one alligator clip on that bolt.MoreSo let's just go ahead and bypass the solenoid by putting one alligator clip on that bolt.
How can I test my speed controller?
0:395:30Testing controller for blown mosfetts - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe start by connecting one of the probe to the ground wire of the controller. And you take theMoreWe start by connecting one of the probe to the ground wire of the controller. And you take the positive probe.
How do you test a 48 volt Club Car controller?
25:0337:53Club Car 48 Volt Powerdrive Testing 1995-2013 - YouTubeYouTubeStart of suggested clipEnd of suggested clip- terminal of the controller. The R vom will display controller capacitor voltage place the forwardMore- terminal of the controller. The R vom will display controller capacitor voltage place the forward and reverse switch. In forward insert the key into the switch. And turn to the on position depress
What controllers are good for golf carts?
Curtis and Alltrax controllers have their features and benefits. Both these controllers are perfectly suitable for golf carts. However, choosing between the Curtis controller and the Alltrax controller depends on the type of golf cart.
What is a golf cart speed controller?
The speed controller of the golf cart consists of circuits, capacitors, and various other electrical components. A minor or major defect in any of the electrical components can be a bad controller symptom.
How to troubleshoot Danaher controller?
To troubleshoot the Danaher controller, certain steps that have been discussed in the previous sections can be performed. Generally, in all cases , the problem starts with a minor wiring issue. Therefore, before going into detail, it is important to check the wires and tighten the connections.
How fast can a controller go?
A small upgrade in the controller can increase the speed from 14 mph to 24 mph. For this, an external handheld device can change the settings. However, before going ahead with this, it is necessary to know the ideal values for any aspect that requires an update. You should consult a service agent for major upgrades.
Can you upgrade the controller on a golf cart?
This can be done with an external device whose operation is discussed in the sections below. The current controller of the golf cart can be upgraded by connecting the device, which has various settings options.
Can you upgrade a golf cart controller to 4 gauge?
Generally, controllers with higher amperage bring in a lot of problems. If speed is required to be increased, then upgrade the entire wire system to 4 gauge. Both controllers are equally beneficial. You should consult the dealer or manufacturer to know which controller is suitable for a particular golf cart.
Why is my golf cart not turning?
The two possible problems you can identify this way is either a bad speed controller, or a bad directional switch or motor. If the motor on your golf cart doesn’t turn, the problem is probably the directional switch/motor, but if there is no voltage at all on your reading, you’ll need to replace your speed controller.
How to test solenoid on a cart?
To test your cart’s solenoid, you’ll want to take a reading of the voltage and compare it to the reading you got off your battery. Att ach the positive probe to the solenoid post nearest the battery and get the reading. If the solenoid and battery readings are identical, there is an issue with the solenoid.
What is Garrett's drive system?
All modern golf carts (Including any cart that is sold by Garrett’s) use the precision drive system or PDS, whereas older carts made before 1994 will use a drive control system. These devices control the acceleration and overall speed of the golf cart, so when they’re not working properly it’s important to know what to do.
Do E-Z-Go Golf Carts have titles?
E-Z-Go Golf Carts, unlike vehicles, do not have a title, but they do have serial numbers. If you are buying a golf cart, it is essential to check the serial number to ensure you do not buy a stolen one. Each E-Z-Go Golf cart has a unique serial number that you can use to identify your golf cart.
Where is the E-Z-Go Cart Serial Number
As mentioned above, all E-Z-Go Golf carts have unique serial numbers. These numbers are essential when buying replacement parts for your golf cart. Textron Specialized Vehicles has been building golf carts for a long time, and the serial numbers are placed on different parts of the golf carts.
How do I push my E-Z-Go Golf Cart?
It can be frustrating when your battery is flat and your golf cart will not roll. To push it to the nearest charging or gas station, you need to release the motor brake. Follow these easy steps to do that.
Why does my E-Z-Go golf cart not move
There are several reasons why your cart refuses to move, but you should check the battery before anything else. If the battery is charged, here are some other reasons why your golf cart will not move.
Are all E-Z-Go Golf carts electric?
No, there are both electric and gas-powered E-Z-Go Golf carts available. Bear in mind that there are several models you can drive on the street, but those are all-electric. These electric models run on batteries that you have to charge at least every 24 hours, depending on how much you use them.
How to tell the Assembly year of my E-Z-Go golf cart
The placement of serial numbers is discussed above, and you will find the manufacturer’s number right next to it. The manufacturer’s number consists of one letter and 3 or 4 numbers. The last two numbers indicate the last two digits of the year of assembly.
How to service E-Z-Go Golf Cart
Like all vehicles, E-Z-Go golf carts require regular maintenance to enhance longevity and performance. You should ensure that your golf cart is serviced after every six months of use. That will ensure that you spot problems and repair them early, which will help reduce repair costs. Here are essential guidelines for E-Z-Go golf cart maintenance.
