What does the drive belt do on a golf cart?
The drive belt on a golf cart connects the two clutches (the drive clutch and the driven clutch) and distributes the power from the engine to the rear wheels. There can be a number of issues that can happen to a drive belt which you should be aware of.
Why is my Yamaha golf cart losing power?
Your electric Yamaha golf cart is likely to be losing power due to a battery or installation-related problems. The battery could be loose, corroded, frayed connections, not retaining charge or have a low water level. Sometimes, the charger may not be plugged in correctly.
How do I know if my drive belt is too tight?
To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger. If it deflects less than 1.5” it’s too tight.
How do you clean the battery terminals on a golf cart?
You can use a mixture of baking soda and water to clean the terminals by removing corrosion and other debris. Look inside the battery to ensure that distilled water is fully covering the conductor plates. The cart's solenoid wire may also cause problems.
How do you change a drive belt on a Yamaha golf cart?
0:462:46Yamaha Drive Belt | How to Install on G29 Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow to wet do this on the back clutch or the secondary clutch take the belt and slowly lay it overMoreNow to wet do this on the back clutch or the secondary clutch take the belt and slowly lay it over the top of this outer chief like this just slowly roll it over. And. It will come right.
Does an electric golf cart have a drive belt?
The drive belt on a golf cart connects the two clutches (the drive clutch and the driven clutch) and distributes the power from the engine to the rear wheels. There can be a number of issues that can happen to a drive belt which you should be aware of.
How do you remove the belt from a Yamaha golf cart?
0:563:29Yamaha Drive 2 Quietech G29 Drive Belt Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst and then you can remove it from the front clutch make sure that your cart is in neutral. SoMoreFirst and then you can remove it from the front clutch make sure that your cart is in neutral. So the cart can freewheel back and forth without turning the clutch.
How do I replace the belt on my electric golf cart?
Answer provided byFirst, raise the golf cart engine cover to access the drive belt inside the engine compartment. ... Next, loosen the drive belt tension bolt with an open-end wrench on the front pulley. ... Finally, pull the front pulley to increase the belt tension. ... MORE: Average car insurance cost in 2021.
How do you check golf cart belts?
0:152:00How to Check the Belts in your Gas Golf Cart | Golf Cars UnlimitedYouTubeStart of suggested clipEnd of suggested clipDown below and you don't want to press the moderate pressure on that belt you're gonna want to seeMoreDown below and you don't want to press the moderate pressure on that belt you're gonna want to see about 3/16 to 1/4 inch of deflection. There no more than that that'll be your proper.
Do golf carts have belts?
Most carts do not come equipped with golf cart seatbelts, so, if you plan on driving your cart on the street, you'll need to install these to make it street legal.
How do you put a drive belt on a golf cart?
2:255:57Changing the Drive Belt and Starter Generator Belt 2008 EZGO TXTYouTubeStart of suggested clipEnd of suggested clipJust. First put the belts on and then tilt the starter generator as far as you can and tighten thatMoreJust. First put the belts on and then tilt the starter generator as far as you can and tighten that nut up. By hand first and then use the wrench to get it a little bit.
What is a drive belt in a golf cart?
The golf cart drive belt is the larger (1" to 1 3/16" wide), longer and usually looser belt on gas golf cars. It connects the drive clutch (on the engine) to the driven clutch (on the differential) and transfers the power of the engine to the rear wheels.
How tight should the drive belt be on a golf cart?
The reason for a Club Car drive belt being too tight can be because the drive belt is too small for the golf cart. The way to check if the belt is fitted correctly is to push the belt down with one finger at the center between the clutches. It should not deflect more than 1.5inches. It should not be less as well.
How do you fix a clutch on a golf cart?
Cleaning the clutch thoroughly might be the simplest solution to this problem. You could also try lubricating the system with a good quality lubricant. This might free up the clutch and thus prevent the squeaking noise. Another common reason could be due to the weights present inside the system hanging up.How to Fix a Golf Cart Clutch (Not Engaging/Slipping/Stuck)https://www.golfstorageguide.com › how-to-fix-golf-cart-...https://www.golfstorageguide.com › how-to-fix-golf-cart-...
Do golf carts have transmissions?
All golf carts (much like cars) have a clutch, which is the part of the drivetrain that helps the put the power of the motor down through to the wheels/ground. Golf cart clutches are a part of the Continuously Variable Transmission (or CVT).The 9 Golf Cart Parts That Break or Need Replacement Most Oftenhttps://www.golfcarttiresupply.com › the-9-golf-cart-parts...https://www.golfcarttiresupply.com › the-9-golf-cart-parts...
How does a golf cart clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.How a golf cart CVT slip drive clutch works - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
How do you tighten the drive belt on a Club Car golf cart?
There is no provision for adjusting the drive belt on a Club Car golf cart. If you find the belt loose or too tight, you have to go for a replacement belt. Choosing the right belt and ordering can pose a challenge. You will need to order a drive belt that is 1-inch shorter than your stock belt.
How does a golf cart clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you change a belt on a club car?
2:0011:52How to Replace your Starter Generator Belt on the 2004 Club ...YouTubeStart of suggested clipEnd of suggested clipSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.MoreSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.
What size is a golf cart belt?
The golf cart drive belt is the larger (1" to 1 3/16" wide), longer and usually looser belt on gas golf cars. It connects the drive clutch (on the engine) to the driven clutch (on the differential) and transfers the power of the engine to the rear wheels. The belt should be loose and free of cracks or delamination.
What is the belt on a golf cart?
The drive belt on a golf cart connects the two clutches (the drive clutch and the driven clutch) and distributes the power from the engine to the rear wheels.
How to tell if golf cart drive belt is too tight?
To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger. If it deflects less than 1.5” it’s too tight.
Why is my EZGO Drive Belt Too Tight?
The reason your EZGO drive belt is too tight can be because you’re not using the right size drive belt.
Why is my EZGO belt so loose?
The reason your EZGO drive belt is too loose could be because it’s worn out, or you’re simply using the wrong size drive belt. In this case, need to find a replacement immediately.
What does it mean when the drive belt is misaligned?
Check and see if the drive belt appears misaligned? If so, is it misaligned more towards the driven clutch (the one on the axle) or the drive clutch (the one on the motor)? If it’s misaligned there is something wrong with the drive clutch.
How to stop a EZYGO drive belt from slipping?
How to stop a EZYGO drive belt slipping: Make sure that you have the right drive belt. Sometimes the wrong drive belt will not be as wide as the clutch you are putting it on. This gives it an unwanted room to move back and forth when you are using the golf cart.
What to do if your clutch is not working?
Once you’ve confirmed that the drive clutch is not functioning properly you either need to have it fixed or replace. Call a trusted certified technician to have it fixed or replaced for you.
How to check battery voltage on Yamaha golf cart?
The pack voltage of the batteries installed on your Yamaha golf cart can be checked by connecting a voltmeter to the positive and negative terminals of the battery. When going uphill, brakes and bearings tend to drag the cart back if they have not been lubricated properly.
Why is it important to wire a Yamaha golf cart?
Ensuring proper series wiring is important while installing a new battery in your Yamaha golf cart. Mis-wired connections can result in slow performance and also degrade the battery.
Why does My Yamaha Golf Cart Run Slow?
The main reason why a Yamaha golf cart runs slow is because of low battery charge, dirty battery terminals, or a loose spark plug.
Why is my Yamaha golf cart so slow to start rolling?
If the spark plug is loose or dirty , a Yamaha golf cart will be slow to start rolling as the torque delivered will be lower than the expected value. Cleaning and maintaining the spark plug gap can help fix this issue. The electrode color for the spark plug is expected to be tan.
How can the speed of a Yamaha golf cart be increased?
The speed of a Yamaha golf cart can be increased by increasing the torque produced by the golf cart.
Why does my Yamaha G1 cart sluggish?
The motor terminals need cleaning too, if the motor terminals are greasy or loose, the power received by the motor will be low, which lowers the speed of the cart. Keeping them tight and clean can help fix the sluggish speed of your Yamaha G1.
How fast does a Yamaha golf cart go?
How to Make a Yamaha Golf Cart Go Faster. Yamaha Golf Carts, on average, offer speeds of around 15mph. Many users wish to get a bit more from their golf carts by increasing the speed by another 4-5mph.
Where is the fuel filter on a golf cart?
Check if the fuel filter of your golf cart is damaged and do a replacement if necessary. This filter is usually located in the fuel tank of the cart. If it’s not damaged, this is a good chance to get it cleaned.
How to check if golf cart is running out of power?
Do a compression test on the golf cart using a compression tester. Low compression can also cause the golf cart to run out of power. Also, check the fuel pressure and ensure that it’s as desired. Check the clutch to see if it’s functioning properly. It should shift out when the cart is on jacks.
Why is my Yamaha golf cart losing power?
Your electric Yamaha golf cart is likely to be losing power due to a battery or installation-related problems. The battery could be loose, corroded, frayed connections, not retaining charge or have a low water level.
Why is my Yamaha G1 golf cart not turning on?
Your Yamaha G1 golf cart may have no power because of cracked seals, a plugged muffler, a fouled spark plug, or low compression. A malfunctioning clutch, an improperly adjusted carburetor, or a worn-out drive belt can also cause this problem.
Why won't my Yamaha golf cart go uphill?
Your Yamaha golf cart will not have power while going uphill if it has a fuel related problem, a worn-out, cracked, or loose drive belt or tension cable, malfunctioning clutches, or low battery voltage.
Why is my Yamaha G9 not turning on?
Your Yamaha G9 golf cart might have no power because of a clutch problem, a dirty carburetor, or low engine compression. The throttle not opening properly or improperly seated air filter box lid can also be a reason for the golf cart to have no power.
How to fix a battery that is loose?
If there are loose connections, tighten them. However, make sure that they are not overly tight. Replace corroded or frayed connections with new ones.
What does a Yamaha cart run on?
Yamaha carts run on electricity generated by an acid-based rechargeable battery and most problems can be traced to this source. If your cart is sluggish or won't start, the battery may need to be charged. If it is charged, but still not working properly, make sure the battery terminal connections are clean and secure.
Why is my golf cart not clicking?
This insulated wire channels the electric current from the battery that powers the cart. If you press on the cart's accelerator and do not hear a clicking sound, the solenoid wires may need tightening.
Do Yamaha golf carts need maintenance?
Yamaha golf carts, like any other machine, will occasionally require troubleshooting and maintenance to ensure that they are functioning properly. Learning to troubleshoot your cart will help you recognize any potential problems before they become serious issues or safety hazards.