To measure the shaft length of your driver, we recommend following these steps. Set the driver on the ground as you normally would to hit a golf ball Take a 48 inch measuring stick or tape measure and place it on the ground Measure from the grip end of the driver down do the heel of the club to get your measurement
How important is choosing the right golf shaft?
What is the Kick Point in a Golf Shaft?
- High Kick Point. A high kick point shaft means that it will bend the most at the top of the club near the grip. ...
- Low Kick Point. A low kick point shaft is one that will bend most at the lower end of the shaft, closer to the clubhead.
- Mid Kick Point. ...
How do you shorten a golf club shaft?
To do that, the DIY golfer will have to:
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
- And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...
How long should my golf driver shaft be?
What Size Shaft Do I Need for My Height?
- Driver Shaft Length Basics. Does the difference in shaft length have a bearing on distance and accuracy? The answer is… it depends.
- Making a Shorter Driver Shaft – Cutting It Down. Whether you add length or cut length, some changes automatically occur within the shaft. ...
- FAQ. How much should I shorten my driver? ...
How to fit a golf shaft?
Installation or Replacement
- TaylorMade Adapters
- Callaway Adapters
- Titleist Adapters
- Ping Adapters
- Nike Adapters
- Cobra Adapters
- Wilson Adapters
- Srixon Adapters
- Mizuno Adapters
- Universal Adapters
How are shafts measured?
2:138:36Double E - How to Measure a Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAre on the ends of the shaft. So again the first the first step in measuring the shaft would be toMoreAre on the ends of the shaft. So again the first the first step in measuring the shaft would be to stop from the outside on both ends of the shaft to get the overall length.
How do you measure a golf driver shaft?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
How do I measure my golf clubs with a tape measure?
Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
What do the numbers mean on my golf shaft?
These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.
How do you measure and cut a driver shaft?
0:543:19How To Assemble a Custom Golf Club Part 8 - How To Cut A Golf Shaft To ...YouTubeStart of suggested clipEnd of suggested clipAnd show you how to measure the club length first you want to place the club on the ground with theMoreAnd show you how to measure the club length first you want to place the club on the ground with the center of the sole touching the ground next take your 48 inch ruler.
How is iron shaft length measured?
A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
How do you measure golf clubs for yourself?
The best way to determine proper shaft length for your custom fit golf clubs is to get into an athletic stance like you're set up to the golf ball, and measure the distance between your wrists and the floor. You can also adjust the shaft length in conjunction with your golf swing.
How long is a 7 iron shaft?
Iron Shaft LengthIRONSHAFT LENGTH for Men (steel/graphite)SHAFT LENGTH for Women (steel/graphite)6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches9-iron36/36.5 inches35/35.5 inches4 more rows
What is standard shaft length for irons?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle.
What does 5.5 mean on a golf shaft?
StiffStiff – 5.5. Stiff Plus – 6.0. Extra Stiff – 6.5. Extra Stiff Plus – 7.0.
How do you read a shaft?
5:0230:01Golf Club Fitting - Understanding Golf Shaft Stiffness - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe amount of Bend is read from the chart behind the shaft and the number is assigned to a stiffnessMoreThe amount of Bend is read from the chart behind the shaft and the number is assigned to a stiffness or more commonly a letter L a RS or X what one decides each of these letters mean is arbitrary.
How do you read a golf shaft?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel. A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.
How to measure golf shaft?
To properly measure a golf shaft, however, you will need to use a rigid measuring device, such as a 48-inch yard stick or a ruler taped to the end of a traditional 36-inch yard stick. Tape measures do not provide an accurate measurement.
How to measure a golf club with a yard stick?
Ensure the ruler is aligned to start at the 2- or 3-inch measurement with the end of the yard stick.
Do you need to know how long the shafts are on each club?
Before you attempt to install new golf shafts on your clubs, you will need to know how long the shafts are on each club. If you are paying a company or individual to install the new shafts, already having the measurements will help save time and get your clubs returned to you faster. To properly measure a golf shaft, however, ...
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why is it important to measure driver shaft length?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency ...
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Do taller golfers need longer clubs?
The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well. For example if you are over 6 ft 2 there is a good chance that you would be better suited to using golf clubs for tall men oppose to using a standard golf set.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
