Golf-FAQ.com

where made honma golf shaft

by Mr. Jerad Cormier DDS Published 3 years ago Updated 2 years ago
image

Honma Japan Sakata factory

Where are Honma Golf clubs made?

Honma Stories - The Golf Club Manufacturer. HONMA is a premium golf club manufacturer and lifestyle brand based in Sakata, Japan.

Are Honma shafts any good?

The torque on the stock shafts are a little higher than what is standard in the US market, and I would strongly suggest flexing up or getting a heavier weight. Honma Golf also makes amazing custom shafts in the FD, mid flight, and the FP, lower flight.

What happened to Honma Golf?

The decline left Honma a financial hot mess. The company filed for bankruptcy in 2005; in 2009 it was purchased by a Chinese businessman and golfing enthusiast, Liu Jianguo. In October 2016, the company was taken public with a goal of raising a net $162 Million (US Dollars) to broaden its reach in China and North America.

What is the stock code for Honma Golf Limited?

HONMA Golf Limited successfully listed on main board of Hong Kong Exchange, stock code 06858.HK. 2018 Strategic alliance with ITOCHU to re-define its apparel business.

image

Is Honma made in China?

Honma takes great pride in it's Japanese heritage, which makes it a bit odd that a portion of the Tour World line is forged and assembled in China. We don't typically think of JDM companies exporting this responsibility to China, but according to Honma, this step was necessary to meet increasing demand.

Is Honma made in Japan?

All the HONMA "Made in JAPAN , Sakata" clubs are produced at the Sakata Plant. While this is one of the largest plants of its kind in the world, the word "Studio" is more fitting than "Factory".

Where are Honma golf clubs manufactured?

Sakata, JapanToday, Honma Golf is headquartered in Sakata, Japan, a coastal city of 100,000 about 200 miles north of Tokyo. All the company's handcrafted clubs are made at a single facility near Mount Chokai, a 7,300-foot volcano.

Who makes Honma?

HONMA is a premium golf club manufacturer and lifestyle brand based in Sakata, Japan.

Is Honma good brand?

These are great clubs to consider if you are in need of a draw bias and have a slower swing speed. Honma clubs are at a much more affordable price than they used to be, and they perform just as well as any brand on the market, if not better.

Are Honma drivers good?

The Honma TW737 450 driver is constructed with a cup-face and high density titanium for excellent feel off the face at impact. It has very traditional crack at impact that is slightly muted. I found it to be about as good of sounding driver as you can buy.

Do any pro golfers use Honma?

Which Tour Players Are Using Honma Equipment? Currently there is 1 PGA Tour player among the top players in the world playing Honma clubs or other Honma equipment. This list includes players like Charl Schwartzel.

Are Honma clubs worth it?

Honma clubs are excellent clubs that will help golfers produce great, low scores if hit correctly. The only issue is their price tag. If you think it is worth it to buy Honma made clubs then definitely make the purchase.

Are Honma good clubs?

Honma offers drivers, fairway woods, hybrids, irons, and putter golf clubs for both men and women golfers. Along with golf clubs, Honma also has premium golf accessories and golf gear such as golf balls, golf bags, golf headwear, and golf leather goods.

Why did Justin leave Honma?

Added Rose: “I am hopeful that during our time of partnership, we have laid the groundwork for Honma to continue to expand their brand. We both feel it is the right time to pursue our own paths.” The marriage between Rose and Honma was short-lived. The former No.

What is the Honma golf logo animal?

the moleThe demonstrations of crafted shaft production, elaborated by hand, with which the luxurious Honma Golf clubs are made. The presence of Honma with the mole leaning on the brand's logo in all corners of the facilities, as well as in the centre of the lake on the 18th hole.

What do Honma stars mean?

To quote from the web: "Honma's Star system, initiated in 1991, denotes both the grade of materials used, and the seniority of the craftsman who builds the club. Hence, a 5 Star top-of-the-line Honma shaft uses T-1000 grade composite, the highest grade commercially available, and is produced only by a senior craftsman.

Where are Honma golf clubs made?

Honma Golf is dedicated to crafting the world’s highest quality and most beautiful performance golf clubs. Honma was founded by craftsmen in Japan who are committed to superior quality, innovation, and performance over 60 years ago. From our factory in Sakata, we believe making a golf club is not only a manufacturing process but also an art form. Honma Golf USA meets Japanese craftsmanship with traditional American golf. Honma golf clubs provide you with unmatched precision, power, and beauty for every golf game you play.

What is a Honma golf club?

Honma crafts a wide array of premium clubs and is the top golf club brand known for its premium performance.

Where is Honma golf made?

WHAT'S YOUR REACTION? Honma golf equipment has increasingly been the first choice of many golfers throughout Asia and their home of manufacturing facilities in Sakata, Japan, is located about one-hour plane ride north of the 2021 Olympics in Tokyo.

What is a Honma driver made of?

At a time when drivers were made of persimmon wood with inserts screwed into the face, mated to a steel shaft, Honma could pair them with graphite shafts. Honma’s image has long been one of a luxury Japanese golf brand. Today, more golfers worldwide – including a growing number in North America and Europe – appreciate that Honma still designs ...

What is the Honma family?

The self-made Honma family has played an instrumental role in the success of the Japanese people and economy since the 16th century. In the 18th century, income from their shipping and banking interests enabled them to become Japan’s wealthiest landowners, which was later immortalized in Japanese folk songs.

How many tradesmen does Honma employ?

Honma employs more than 350 legendary tradesmen known as ‘takumi’ or ‘expert craftsmen’ ...

Where is Tsurumi Golf Centre?

The brothers were both very avid golfers when they opened the Tsurumi Golf Centre in Yokohama more than six decades ago. From their single driving range and club repair business, grew the company which today crafts the world’s most prestigious golf clubs.

Where did the Honma family live?

In 1813, the Honma family built a summer residence in the port city of Sakata. After World War II, the home was renovated and turned into a private museum, with many historic art treasures. It is now one of Sakata’s main tourist attractions.

Who made the katana?

In 1959, brothers Yukihiro and Hiro Honma — in a manner true to the traditional Japanese craftsmanship that went into preparing a katana for the feudal samurai — began to produce some of the finest golf clubs in the world. The brothers were both very avid golfers when they opened the Tsurumi Golf Centre in Yokohama more than six decades ago.

Where is the 2017 Honma 737 made?

2017 Honma 737 series no longer made in Japan. It is made in Taiwan.

Why is Honma so bearish?

As an investment, I’m bearish on Honma and golf companies in general because the world market for golf equipment isn’t growing in any appreciable manner – and growth is what invites investment.

What is MyGolfSpy showcasing?

This year MyGolfSpy is showcasing a variety of Japanese equipment companies in an effort to familiarize readers with these brands and what each has to offer. In case you missed our coverage of Miura and Vega, take a peek.

What are some examples of golf stores?

As stated, PGA Superstore and Golftown are two examples. Likely, it will be several more.

What was the original callaway?

Let’s get it straight… Original Callaways was like hitting a ball with a 2 x 4. They had 100 plus gram shafts… The Japanese clubs, “back then” were light years (golf equipment years) ahead. You ask how so… the following…

Is Taylormade a metalwood?

Most recently, Adidas finally sold TaylorMade, which earlier this year lost its position as the #1 metalwoods brand in golf (based on retail sales). The golf brand was effectively a 3-bottom plow on an otherwise healthy machine.

Is the 737P a good golf swing?

If iron play is your weakness, but you have a reasonable swing speed, the 737P is a good option. Even though it’s cast, it’s still plenty soft. What’s more is at around $165/club ($175 for the wedges), the pricing is exceptionally reasonable for this segment of the market.

Ti5N Titanium

Honma engineers use high-rigidity, high-strength Ti5N titanium in the clubface, to maximize clubface flexion. Power loss is minimized on off-center shots.

Ultra-thin crown

Super low specific gravity titanium alloy “Ti811” helps reduce crown thickness to 0.45mm and reduce weight by about 3g, to give us more flexibility to maximize CG.

HIGH SWING SPEED THROUGH SUPERIOR SHAFT MATERIALS AND DESIGN

The new ARMRQ shafts are made in Sakata, Japan with the industry’s most-sophisticated materials. Multi-axis Metal Hybrid Armour fiber technology visible below the grip increases strength under the hands and provides counterbalance, to increase swing speed. For 3S grade and above, new high-strength, shape memory Twist Fleuret material increases energy transfer to increase your distance potential. 5S grade shafts have additional bias plies of T1100G along the full length of the shaft, to improve recovery and provide the highest opportunity to increase your distance. All grades of the new ARMRQ shafts feature a high smash factor profile with a softer mid-section..

New ARMRQ Contact Image by Grade

To this point, ARMRQ shafts differentiated only in consistency and appearance across star levels. But with the new ARMRQ, the higher grade you use, the more distance performance you will achieve through an increase in swing speed. The higher the star level, the longer you’ll hit it.

Where are Honma golf clubs made?

Honma Golf Company is a Japanese maker of high-quality, hand-crafted golf clubs, which it sells primarily in Asia, the United States and the United Kingdom. The company is well-known for its custom clubs.

What was the Honma shaft in the 1990s?

1990s. Throughout the 1990s, Honma continued to innovate in shafts and metal woods. The key development during this decade was the addition of titanium to the carbon graphite shaft. Honma introduced this technology, for which it secured a U.S. patent, in 1990 in the form of its Titanium Fine Metal and Titanium Carbon shafted clubs.

How long does it take to buy a Honma golf club?

The specifications garnered from a fitting session are sent to the Sakata factory, where each club is hand-crafted -- from flex to launch angle to club length. The process takes about a month.

When were Honma Persimmon woods invented?

Honma's persimmon woods were developed during the 1980s. Professional golfer Lee Trevino used Honma persimmon woods in his 1984 PGA Championship victory. In 1985, the company introduced its Boron line and continued to improve on its carbon-graphite shafts.

Where are Hiro Honma woods made?

The company moved its headquarters and manufacturing plant to the coastal city of Sakata, about 200 miles north of Tokyo, where it became the largest employer. Honma's persimmon woods were developed during the 1980s. Professional golfer Lee Trevino used Honma persimmon woods in his 1984 PGA Championship victory. In 1985, the company introduced its Boron line and continued to improve on its carbon-graphite shafts.

When did Honma introduce graphite shafts?

The company would improve on this model with the New Collect and Extra Collect through 1973. Honma introduced its first graphite-shaft woods in 1973. In 1978, it launched the Hiro Honma brand, named after the founding brother who became the driving force behind the company. In the 1970s, Honma also added a line of apparel.

Where is Honma made?

Honma also expanded its sales presence in Asia, opening offices in Hong Kong, Malaysia, Sing apore, Taiwan and Thailand.

Where is Honma made?

History. The company was founded back in 1959 by the Honma brothers in Yokohama, Japan. In 1981, the company moved to Sakata, in Yamagata prefecture. The Sakata site is where manufacturing continues today for Honma products.

Who is the wedge wizard in Honma?

Anything you want, they will get and put it in their clubs. You will have to pay for it, of course, but you are not limited to stock options. Honma has also brought Jacob Sanborn, aka “Wedge Wizard,” a legend in the wedge customization world, on board. He is now making custom stamped and finished wedges.

Why are tungsten clubs made separately?

The attention to detail in crafting these clubs is top-notch. The way the lines of the club flow into each other highlights the quality of these irons. The face is constructed separately so the engineers can hide tungsten in the toe of the clubs. This moves the center of gravity to the center of the club head and increases stability in the head.

Can you afford a honma?

I often ask my customers, “Do you want to try Honma?” The most common responses are: “What is a Honma?”, “Is that the one with a gopher or a mole on it?”, or “I cannot afford those.” Yes, the mole is their logo, and yes, you can afford them. This company often gets overlooked, because people get sticker shock when they see the $4,500 price of a 5-star Beres driver. Come and follow me down the mole hole into the world of Honma.

Can you order custom golf clubs from Honma?

After talking to the customer service manager, I was really intrigued by Honma’s custom capabilities. For a long time, you could not order custom clubs from Honma. It was very much what you see is what you get. But the direct quote I got from him was “the world is your oyster.” Anything you want, they will get and put it in their clubs. You will have to pay for it, of course, but you are not limited to stock options.

Does carbon fiber golf club sound dead?

The feel and sound, especially for a majority carbon fiber club, were top notch. Carbon fiber clubs usually sound a little dead, even though they go as far as metal drivers. The shafts in the club could raise some concerns. The shaft I was using might have been a little soft.

Does Honma make custom shafts?

Honma Golf also makes amazing custom shafts in the FD, mid flight, and the FP, lower flight. These shafts spec out closer to normal US market shafts and should be strongly considered, especially if you do not want to change shaft weight or flex.

Where is Honma's headquarters?

The company’s headquarters is in Tokyo however their historic plant in Sakarta continues to build clubs. The Honma family have had a long relationship with the Sakarta region to the point where songs have been written about the Honma family’s wealth there. 6.

What are some interesting facts about Honma?

11 Things You Didn’t Know About Honma. Here are 11 things you didn’t already know about the Japanese club manufacturer. 1. Founded in 1959, the Tsurumi Golf Centre Company was created by the Honma brothers and three years later their first clubs emerged onto the golf market. 2.

image

Honma – Origin Story

Image
The general theme of small, cottage industry turned significant JDM player is very much a part of Honma’s DNA. In 1958, the Honma brothers opened a driving range in Tsurumi, Yokohama. Five years later they formed the Honma Golf Club Manufacturing Company. The next three decades witnessed significant growth a…
See more on mygolfspy.com

Landscape

  • There’s always risk involved in taking a company public. This is particularly true for golf equipment companies who play in a space where the global market is relatively stagnant, if not contracting slightly. Potential stockholders need to believe they are investing in something which is likely to go up in value, and share prices increase largely when companies experience substan…
See more on mygolfspy.com

Current Line

  • Honma has several lines of clubs and shafts which are categorized and priced according to the number of stars. More stars mean higher costs, but also gets you tighter tolerances, cutting edge technology, and materials typically reserved for jewelry (think gold and platinum). The BeZeal and Beres lines (higher star rankings) lean toward the game-improvement crowd, and the reasoning …
See more on mygolfspy.com

What’s Different?

  • Honma has the heritage and lineage to tell the story of JDM quality and precise craftsmanship. It owns and controls its facilities in Sakarta, Japan and the average tenure of a Honma master craftsman is 37 years (there are about 15 of them). It has a considerable stronghold in Asia ($250 Million in sales last year), and with Hideto Tanihara’s solid play (56th in OWGR and lost to Dusti…
See more on mygolfspy.com

Outlook

  • Honma’s progress has to be measured differently because it serves two masters: the consumer and the investor. As an investment, I’m bearish on Honma and golf companies in general because the world market for golf equipment isn’t growing in any appreciable manner – and growth is what invites investment. The potential upside for any one company is mitigated by the number of com…
See more on mygolfspy.com

What else?

  • The words Vizard (shafts) is a mashup – not unlike Brangelina. The concept is a victorious wizard, therefore Victory + Wizard = Vizard. Personally, my first association was something along the lines of a Japanese lizard – but it’s hard to argue with wizardry. Honma has a tour staff of 17 players, but don’t expect to see it sending out equipment with the hope of recruiting new players…
See more on mygolfspy.com

Final Thoughts

  • Adam Sheldon fully admits the retail space is pretty much a mess and consumers are looking for a company worthy of trust. He believes Honma is such a company, but there’s a rub. Consumers can only trust a company when they’re consistently the first priority – and when you have shareholders, no one can always be the first priority. Regardless, it’s encouraging to see an ackn…
See more on mygolfspy.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9