Refinishing or club-making kits are available at most major retailers. Among the key items you'll need are a vise, a hooked-end utility knife, a heat torch, double-sided tape, solvent, rags and any new gear you're planning to install. You might need additional materials depending on the scope of your project.
Full Answer
What is involved in refurbishing Irons?
Refurbishing Irons entails buffing and polishing the sole & toe, re-painting scoring lines and refinishing the face. We are not able refurbish shafts or ferrules, so they will remain in the same condition prior to refurbishing the club head.
What supplies do I need to re-Grip my clubs?
Whether you need supplies to re-grip your current set of clubs or you want to start from scratch and you need epoxy, tape and solvent, find what you're looking for here. Looking For Custom Built Clubs? Shop Here
Can You refurbish shafts or ferrules?
We are not able refurbish shafts or ferrules, so they will remain in the same condition prior to refurbishing the club head. There is no guarantee that club heads can be refurbished to a specific condition. On average, condition will increase by two grades.
Can my club head be refurbished?
There is no guarantee that club heads can be refurbished to a specific condition. On average, condition will increase by two grades. We can not refurbish plated or chromed clubs and we do not regrove. We also offer a full list of customization options.
How much does it cost to get golf clubs Reshafted?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How much does it cost to rewrap a golf club?
The average cost to regrip your golf clubs will be between $35-$190. The price you pay will depend on what grips you choose and whether or not you regrip them yourself. Expect to pay $35 if you do everything yourself and get the cheapest grips.
How much does epoxy golf clubs cost?
Before you use a golf epoxy for your golf club, you should know how much epoxy you will need to use. All you need to do is to coat the shaft tip and the complete surface inside the hosel separately with a thin and even layer of the epoxy. This will usually be less than 0.5g.
How do you refurbish golf clubs at home?
2:2524:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust some water and some scraping and away we go yep okay had to stop because we had a customer howMoreJust some water and some scraping and away we go yep okay had to stop because we had a customer how about that. Okay just a few minutes with the with the groove it brush.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Can I Regrip my own golf clubs?
0:063:58How To Re-Grip Your Own Golf Clubs From Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's what you're gonna need you're gonna need a hook blade two-inch double-sided tape solventMoreSo here's what you're gonna need you're gonna need a hook blade two-inch double-sided tape solvent preferably water-based torch straight razors towel.
What type of epoxy is used for golf clubs?
Permabond offers a range of toughened epoxy adhesives which are suitable for bonding golf clubs. They offer excellent adhesion to carbon, graphite, composite, titanium, steel, wood and many other materials. Cure speed and viscosity can be matched as per the user's preference.
Can JB Weld be used for golf clubs?
Jb Weld can be used on both metal and plastic golf clubs. It is non-toxic and safe to use on most surfaces.
How long does golf club epoxy take to set?
When it comes to epoxy, clubmakers have a choice between slow and fasting curing epoxies. Slow cure epoxy typically fully cures to safely hit a ball in 20 to 24 hours at a normal room temperature. On the other hand, fast curing epoxy can come to full cure in approximately 30 minutes.
What is the best paint for golf clubs?
Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Acrylic Paint. This paint is water-based and drys quite quickly and is cheaper than enamel paint.
Will Coke remove rust from golf clubs?
Pour the Coke into the bottom of the bucket on the club heads. When the Coke settles down, you will want it to soak for several hours. Letting the golf clubs soak for at least four hours or so will give the Coke time to work cleaning the rust off the clubs without you having to scrub them.
How do I make my golf clubs look like new?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
How much is it to get clubs Regripped?
Many people find that getting in the routine of regripping every Spring as the golf season “officially” begins is the easiest way to remember. How much will it cost to regrip my clubs? Expect to pay anywhere from $75 to $130 for your entire set of clubs, depending on the grip you choose.
How often should you Regrip your clubs?
once a yearAs a general rule, it's recommended that you change your grips once a year, though if you play more than 40 rounds a year or hit the range a few times a week, you may need to replace grips more often. The most obvious sign of worn grips is a slick, glossy feel and appearance.
How long does it take to Regrip golf clubs?
between 1 to 2 hoursThe whole process of regripping golf clubs is probably going to take you somewhere between 1 to 2 hours. I wouldn't call it an easy project, but once you do it once you'll probably be comfortable doing it forever.
How much does it cost to Regrip golf clubs UK?
Price: £3.00 Per Club Plus the cost the Grip.
Why Paint Golf Clubs?
Golf clubs go through wear and tear, paint can chip. Before you throw out your old clubs, make sure that they need replacing or are they just looking worn out. A coat of the correct golf club paint can restore your clubs to looking like new again.
Best Type of Paint to Use
When looking for suitable paint to repair chips, scratches or, scuff marks, it is essential to choose a paint that will withstand the heavy impacts that all golf clubs will encounter.
How to Paint Golf Clubs
The reasons for the painting of golf clubs can be to repair chips on a driver, paint the complete shaft or, Custom paint fill.
Steps to Follow
Place Acetone in a suitable bowl and allow the golf clubs to soak in the paint remover. It is recommended that clubs soak for at least six hours allowing the acetone to permeate to all the difficult places to reach.
How to Customise your Golf Clubs
Customizing your clubs refers to changing the color of the embossed areas on your club such as names and numbers. This has become an increasingly popular way among golfers to personalize their clubs known as Custom Paint Fill
1. Ecovue Premium Paint Pens (Currently Out Of Stock, Will Update Soon)
Ecovue paint pens are easy to use and produce accurate and smudge-free results when paint filling letters and, numbers
2. G-Paint Golf Club Paint
Using G-Paint golf club paint is an easy way to Custom Paint Fill your golf clubs. The recommended set consists of 4, 0,3 fl oz bottles with Black, White, Red and, Blue colors It can be applied to numbers, letters and, all embossed areas of your club.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.