Bring your repair in store, or mail in your repairs to: Golf Warehouse Atlanta 2697 Spring Rd SE Suite B Smyrna, GA 30080 Mailed in club repair should have a simple note including name, address, phone, and email and repair instructions.
How much does it cost to get golf clubs reshafted?
How Much Does It Cost To Get Golf Clubs Reshafted? SERVICE PRICE Reshaft (Steel or Graphite) $15.00 plus price of shaft Reshaft (Bore Through) $25.00 plus price of shaft Customer Provided Reshaft Steel or Graph ... $25.00 per shaft Customer Provided Reshaft Bore Through $35.00 per shaft
What is re-shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke.
Where can I get a shaft removed from my golf clubs?
If in doubt, visit your local Golf Galaxy retail store for advice. Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool.
What tools do you need to reshaft a golf club?
If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job. If you want the manufacturer to reshaft the club, then you will more than likely have to pay shipping fees both ways.
How much does it cost to get a golf club Reshafted?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
Can I get my irons Reshafted?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
How much does it cost to get golf clubs Regripped?
The average cost to regrip your golf clubs will be between $35-$190. The price you pay will depend on what grips you choose and whether or not you regrip them yourself. Expect to pay $35 if you do everything yourself and get the cheapest grips.
Can you get a driver Reshafted?
Can Golf Drivers Be Reshafted? Golf drivers can be reshafted, however, the adjustable shafts are significantly more difficult to replace than non-adjustable shafts. Playing few rounds with the proposed replacement shaft before committing to the change is highly recommended.
How long does it take to Reshaft a golf club?
If in stock, our Certified club repair technicians can have your new shaft installed and ready for play within 48 hours.
Can I replace my steel shafts with graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It's a little involved, but completely doable.
Is it worth it to Regrip golf clubs?
If your grips are looking a bit shiny or showing wear marks then it's probably time to upgrade. A lack of traction is going to cost you as your grip pressure will increase and you'll begin to lose the flow of your swing. You should invest in new grips each year.
Can you Regrip golf clubs yourself?
0:093:58How To Re-Grip Your Own Golf Clubs From Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's what you're gonna need you're gonna need a hook blade two-inch double-sided tape solventMoreSo here's what you're gonna need you're gonna need a hook blade two-inch double-sided tape solvent preferably water-based torch straight razors towel.
How long does it take to Regrip a golf club?
between 1 to 2 hoursThe whole process of regripping golf clubs is probably going to take you somewhere between 1 to 2 hours. I wouldn't call it an easy project, but once you do it once you'll probably be comfortable doing it forever.
Do all shafts fit all heads?
The answer is straightforward: it's capacity to fit with any club head. As a result, whatever golf club preference you have; a wedge, woods, hybrids, or putters, you can ensure that the golf shaft you are comfortable with can go with you in the game.
Can you fix snapped driver?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
How much does it cost to extend golf clubs?
Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft. *Save grip Fee may apply.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
How do you Reshaft an iron set?
2:3122:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the shafts you don't need a shaft puller. Anything like that you can just heat them up andMorePull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Does Ping replace broken clubs?
The PING Consumer Relations Department will setup the repair, send you the repair order number, and provide you with instruction to send your club(s) to PING. Call the PING Consumer Relations Department at 1-800-474-6434 to setup a repair order.
How much does it cost to extend golf clubs?
Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft. *Save grip Fee may apply.
Can I Reshaft My Irons Myself?
Reshafting your irons is a job that is best left to professionals, especially if you do not have the right tools. Working with heated steel is dang...
Are Graphite Shafts on Irons Good?
Yes, Graphite shafts can easily be found on nearly all graphite irons that are available in the market today, ranging from the most expensive to en...
How Do You Reshaft Irons With Graphite Shafts?
Reshafting irons with graphite shafts requires special equipment and a good level of skill. It is not something that you can do at home, but the pr...
Can I Change My Steel Shafts to Graphite?
Yes, you can change the steel shafts to graphite or wood. However, according to the USGA rules, a steel shafted golf club consists of steel shaft a...
Can You Reuse Golf Shafts?
You can reuse golf shafts, but you cannot reuse the grip. A golf shaft is made up of durable material called graphite. A golf shaft is much lighter...
How to put shaft on club head?
Insert the shaft into the club head's hosel. Rotate the shaft while sliding it in and out of the hosel, evenly coating the shaft and hosel with epoxy. Align the shaft graphics the way you want them by rotating the shaft. Then, tap the butt end of the shaft on the floor to seat the tip against the bottom of the hosel bore.
How to remove graphite shaft?
Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool. Heat the hosel with a heat gun while wearing leather gloves. Slowly turn the extractor's threaded bolt with a box wrench. If the head does not loosen, reapply heat to the hosel.
How to remove a steel shaft from a metal?
Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. If there is a plastic ferrule in place, wrap a wet paper towel around it to prevent burning. While wearing protective leather gloves, aim the flame of a torch at the hosel.
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
How long to let a golf shaft rest?
Don’t use too much and cause a mess. Reinsert the shaft, now align the shaft graphics to how you want, let it rest in the playing position for 24 hours. After, apply some acetone to a paper towel and hold the towel to the ferrule and spin it.
How much does it cost to replace a golf shaft?
Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club far more expensive.
How much does it cost to install a golf grip?
Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.
Can epoxy glue be used to keep a golf club together?
Epoxy (glue) come in different types and have different uses, not all of them will work for keeping a Golf club together.
