How do you cut a golf club?
First, clubs should normally be cut from the butt (or grip) end. Then weight (lead tape or other method) should be added to the clubhead to counterbalance the reduction on the grip end. This is especially critical in putters, where feel is all-important.
How do you remove the grip from a golf club shaft?
Remove the grip tape from the shaft. Measure the amount of shaft you want to remove (add an additional 1/8 inch to make up for the end of the grip), and mark the spot with permanent marker. If it is a graphite shaft, wrap two layers of masking tape around the cut location.
Did you know that almost all golf shafts are cut down?
Brent Kelley is an award-winning sports journalist and golf expert with over 30 years in print and online journalism. Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.
What supplies do I need to cut down my golf clubs?
Adhesive Tape (for securing the new grip – purchase from a pro shop) (the amount you’ll need depends on how many clubs you’re planning on cutting down) New Grip (one for each club that you’ll be cutting down) Once you’ve gathered all of your supplies and prepared your workspace for the job, you’re ready to get started.
How much does it cost to shorten golf clubs?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.
Can you get your golf clubs shortened?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
Can you cut your golf clubs down?
In short, cutting down a club leaves less shaft to offset the weight of the club. And since some players -- including many tour pros with their putters -- still cut down clubs, it's important to know how to offset the potentially negative impact. First, clubs should normally be cut from the butt (or grip) end.
How much does it cost to cut irons down?
Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
Can I cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
What if golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
How long should golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Can you change the length of golf clubs?
To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. Cut the ferrule and remove the clubhead from the old shaft as you did before trimming the tip. If you wish to keep the original grip, use an air compressor to separate it from the old shaft, then pull the grip off.
How do I resize my golf clubs?
0:483:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing we got to do is determine the length of the golf club we're going to we're going to cutMoreFirst thing we got to do is determine the length of the golf club we're going to we're going to cut and how much we need to cut off of it. So we're going to lay the club.
Should I get my irons cut down?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
Do shorter golfers need shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
How do I know if my irons are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
What to do if your golf shaft is broken?
If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club.
What to do if your club head is loose?
If your club head is loose or has become unattached from the shaft, don't go buy a new club. Golf Galaxy's Certified Club Technicians can install the head correctly and re-epoxy the head so it is returned to a like-new state.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
How to cut yourself with a razor blade?
Put a fresh blade in your razor knife. A sharp blade cuts easier and that protects you from having to push or pull too hard, which could expose you to a higher risk of cutting yourself. A hook blade makes this step easier and safer. Slice through the grip until you have cut it from top to bottom.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
Why cut down a golf club?
In short, cutting down a club leaves less shaft to offset the weight of the club. And since some players -- including many tour pros with their putters -- still cut down clubs, it's important to know how to offset the potentially negative impact. First, clubs should normally be cut from the butt (or grip) end.
What putter did Sergio Garcia use?
Much was made of Sergio Garcia's change to a TaylorMade belly putter prior to the British Open, but at the Tour Championship the Spaniard used a new putter -- a Guerin Rife Barbados model -- to finish fourth. Last week's putter was heel-shafted; the belly model Garcia used at Carnoustie was center-shafted. ... Mark Calcavecchia was down to one putter in Atlanta (he had used a pair in a previous FedEx Cup event). Calc also went with a new driver (a Ping G10) with the same old-school loft (7.5 degrees) he has used all year. ... So with a $10 million annuity on the line, what did __K.J. Cho__i do? Switch to a set of Nike Ignite irons, a lower-priced club that retails for $400 for a set of eight. Fellow Nike staff player Rory Sabbatini won earlier this year at Colonial using the bargain bats. ... Ernie Els gave fans at East Lake a sneak preview of Odyssey's putter line for 2008 when he used a Black Series i3 model. The putter features a new, firmer face insert. ... Those at last week's PGA Fall Expo in Las Vegas got a look at Nike's driver line for next year, including revised Sumo2 and Sumo drivers. The drivers, which won't be available until February, feature a deep face, and the square-shaped Sumo2 boasts a moment of inertia of 5,900 -- highest allowed by USGA rules.
How many swingweight points do you lose when you remove 1/2 inch?
For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.
How does shortening a golf shaft affect swing weight?
Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
1. Forsgate Country Club
From Business: Open to the Public for Golf Outings, Corporate and Social Catering. Golf, Sports and Social Memberships availavilable.
6. Cranbury Golf Club
From Business: Cranbury Golf Club is a superbly manicured golf course and club in central New Jersey that presents a challenge to the accomplished player, yet is considered a…
8. Battleground Country Club
They catered the anniversary party my siblings and I had for our parents on their 40th wedding anniversary. The food was amazing and their service…
12. Bella Vista Country Club
From Business: Bella Vista Country Club is privately owned and operated by the Beshara family. It is located in Marlboro, N.J., and offers a full-service golf course and a more…
17. Colts Neck Golf Club
Nice lay out. Always in good condition. Friendly people. Tough but no too tough.
18. Gambler Ridge Golf Club
A fun course to play if you have time for a very slow 6 hr. round of golf, and don't mind the rangers screaming to hurry up while there are several…
23. Metedeconk National Golf Club
From Business: Metedeconk National Golf Club is a private golf course and is located in Jackson, N.J. It has other added attractions, including a 50-acre practice facility with…
