Full Answer
Can you repair a motor controller on a golf cart?
Considering the price of hiring someone to troubleshoot your golf cart’s motor controller, it is far cheaper for you to do the repair work on your own. Fortunately, replacing the motor controller on a golf cart is fairly straightforward.
Where can I get my speed controller repaired?
GolfCarCatalog.com has a rebuild and repair service for many models of electronic speed controllers for golf carts, utility vehicles, forklifts, scissorlifts, and many industrial vehicles. Repairing your speed controller costs a fraction as much as buyng a replacement controller.
How do I know if my golf cart’s speed controller is bad?
When your golf cart’s speed controller isn’t operating correctly, your cart will show it by running erratically or failing to drive at one constant speed. If your cart starts showing these symptoms, the first thing you should look at is your speed controller.
Can a rebuilt controller be repaired?
All of our rebuilt controllers are repaired by a certified rebuilder and have a one year warranty against repair defects. Rebuilt controllers can often be a cost-effective way to get your car up and running quickly. WE DO NOT STOCK REBUILT CONTROLLERS. This is a REPAIR SERVICE and not an "exchange" program.
Can a golf cart controller be repaired?
Considering the price of hiring someone to troubleshoot your golf cart's motor controller, it is far cheaper for you to do the repair work on your own. Fortunately, replacing the motor controller on a golf cart is fairly straightforward.
How do I fix my golf cart controller?
Here are 5 steps you should follow for a DIY fix to your golf cart's speed controller.Flip the maintenance switch. ... Reset the battery cable. ... Check your connections. ... Test the solenoid. ... Check your controller's power output.
How do you test a golf cart motor controller?
How to Test a Club Car Golf Cart Speed Controller? The simplest test to ascertain your golf cart controller's performance is to to watch whether it runs when the batteries are fully charged with a slight push of the pedal. If you hear a distinct clicking noise, then your golf cart is running correctly.
How do I test my EZ GO 36 volt controller?
Check Power Output From the Controller Connect the negative probe to the controller's M terminal and positive probe to the B+ terminal. Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery.
How do I know if my golf cart controller is bad?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
How do you reset a golf cart controller?
Easily Reset the Club Car Golf Cart OBCKey switch to off.Set forward/reverse to neutral.Put tow/run switch to tow.Disconnect the negative battery terminal from the battery pack.Put the tow/run switch to run.Put forward/reverse switch to reverse.Put key switch to on.More items...
How do you test a motor controller?
How to Test an Ebike Controller at HomeStep 1: Connect your controller to the battery.Step 2: Set the multimeter reading. ... Step 3: To test for continuity, set your multimeter to continuum. ... Step 4: Test every line that comes out of the controller. ... Step 5: Set your multimeter to resistance mode to test for resistance.More items...•
Where is the reset button on an electric golf cart motor?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
How do you bench test a golf cart controller?
0:002:12How to bench check curtis controller and golf cart motor - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo the curtis controller. And just clap your positive. There then you're going to take anotherMoreTo the curtis controller. And just clap your positive. There then you're going to take another jumper lead to give you your voltage to power up the controller.
How do you speed up an EZGO electric golf cart?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
Why does my ezgo golf cart not move?
Why EZGO gas golf cart won't go forward? The main reason why a EZGO gas golf cart will not go forward is because of a locked up brake, or a faulty solenoid and accelerator. A defective Run/Tow or Forward/Reverse switch can also cause a EZGO to not move forward.
How do you change the speed controller on a EZ Go golf cart?
0:428:41EZGO Controller | How to Install Curtis Golf Cart Controller in TXT - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust get this cable. Off. Okay now that we've got that all the controllers underneath this coverMoreJust get this cable. Off. Okay now that we've got that all the controllers underneath this cover which happens to be on the passenger side of the golf car and it's being held on by four bolts.
Where is the reset button on an electric golf cart motor?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
Where is the reset button on a Club Car golf cart?
Identify your main battery supply (usually the largest battery) on your motor. Check around this supply for a small red button that may or may not be labeled “Reset”. Press and hold this button for a few moments and then release it to reset the motor.
Where is the speed sensor located on a Club Car golf cart?
The speed sensor in a Club Car Precedent golf cart is located on the back of the motor. To remove the sensor, unplug the cables behind the motor. You can use a 5/16-inch socket to remove the pigtail connector and pop off the plastic housing that encases the speed sensor.
How do you test a Curtis controller?
0:002:12How to bench check curtis controller and golf cart motor - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo the curtis controller. And just clap your positive. There then you're going to take anotherMoreTo the curtis controller. And just clap your positive. There then you're going to take another jumper lead to give you your voltage to power up the controller.
How long is a rebuilt controller warranty?
All of our rebuilt controllers are repaired by a certified rebuilder and have a one year warranty against repair defects. Rebuilt controllers can often be a cost-effective way to get your car up and running quickly.
Can you rebuild a controller?
If you have opened the case of your controller, if it is severely melted, severely corroded, or if has been underwater, it is often not repairable. However, sometimes even controllers which look good from the outside may not be rebuildable. If your controller is not rebuildable, we will notify you and attempt to find a solution for you. We will return non-rebuildable controllers upon request, for the cost of shipping.
How to replace motor controller?
There are a few things you can try before resorting to completely replacing your motor controller. Remove the engine cover and disconnect the battery. View the wires leading to motor control unit. If the wires are corroded, scrub with a wire brush or replace. Replace the solenoid.
Can you replace a golf cart motor controller?
Fortunately, replacing the motor controller on a golf cart is fairly straightforward. It’s a question of removing the entire motor controller and replacing it as one unit. Unfortunately, a motor control unit is fairly expensive. There are a few things you can try before resorting to completely replacing your motor controller.
Where is the maintenance switch on an EZ Go golf car?
You will likely find the switch under the seat of your golf car,t but if you’re having trouble finding it, consult your owner’s manual.
Why is my golf cart not turning?
The two possible problems you can identify this way is either a bad speed controller, or a bad directional switch or motor. If the motor on your golf cart doesn’t turn, the problem is probably the directional switch/motor, but if there is no voltage at all on your reading, you’ll need to replace your speed controller.
What is Garrett's drive system?
All modern golf carts (Including any cart that is sold by Garrett’s) use the precision drive system or PDS, whereas older carts made before 1994 will use a drive control system. These devices control the acceleration and overall speed of the golf cart, so when they’re not working properly it’s important to know what to do.
Is a speed controller reliable?
Speed controllers (especially modern ones) are pretty reliable and hopefully you won’t have to deal with this problem . If you do, we hope you can use the steps in this article to help you identify and fix the issue.
