We encourage you to ship your clubs to us for refinishing. Write us an e-mail at [email protected] Place "Refinish" in the subject line and be sure your message includes the make, model and color choice of your club, along with your e-mail address and daytime phone number.
Full Answer
How to refurbish golf clubs?
red, green, blue) Wheel set (if you don’t want to buy separately) Polishing compounds
- Sisal wheel – This is going to do the bulk of your polishing and should be used with the black polishing compound (you can also use brown and white compounds ...
- Polishing wheels – For final touches. Use with finer polishing compounds (i.e. red, green, blue)
- Wheel set (if you don’t want to buy separately)
- Polishing compounds
How to regrip golf clubs [7 Easy Steps]?
How To Regrip Golf Clubs Yourself. You will need the following… New grips; Double-sided tape; White Spirit; A sharp Stanley knife or similar; A cloth; A receptacle as long as a grip; A vice with shaft protector; Step 1: Remove the old grips. First, cut or peel off the old grips, which may or may not be straightforward depending on how long they’ve been on.
How to regrip your golf clubs at home?
How To Regrip Your Golf Clubs At Home? Remove the old grip and cut away from yourself as much as possible. Take off the old grip and grip tape by peeling or scratching it. Make sure you clean off the residue with a cloth and Mineral Spirits Grip Solvent. If you are using a utility knife to cut graphite shafts, use a hook blade.
What solvent to use for regripping golf clubs?
What Solvent Is Used to Install Golf Club Grips?
- Commercial Grip Solvent. The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive.
- Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. ...
- Nail Polish Remover. ...
- Water. ...
How much does it cost to restore golf clubs?
Professional Refinishing You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
Is it worth refurbishing golf clubs?
When it comes to golf club refurbishment, it's often more about improving the look of your clubs rather than their playability. If a standard cleaning won't do, a golf club refinishing can help return your clubs closer to their original, polished state.
Can golf clubs be resurfaced?
Refinishing a set of golf clubs is very simple, it takes only a few days, and it is well worth the effort. After it's completed one time or two it will become even easier to accomplish the next time and the time after that.
How do I refurbish my golf clubs?
4:1024:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you do the acetone you can also remove the numbers. Themselves. So you have to be very veryMoreAnd you do the acetone you can also remove the numbers. Themselves. So you have to be very very careful with that then you've got to polish the shaft and then you got to redo the grip.
How much does it cost to Regroove golf clubs?
Golf Club Regrooving Services What is this? Using a restoration service will save you time and is normally very affordable to use. The average price of using these services ranges from $12 to $20 (USD).
How do I re Chrome my irons?
1:2412:33How to restore the chrome finish on a set of golf club irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter they've been wired up on copper wires or hooks in this case then we put them in a tank ofMoreAfter they've been wired up on copper wires or hooks in this case then we put them in a tank of sulfuric acid and some other things. And we reverse the process and we're actually plating the plant.
Where can I get my irons Reshafted?
When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you're unfamiliar with the process, you can visit the Golf Services PROS at your local DICK'S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.
Can you remove rust from golf clubs?
0:212:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get ridMoreBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
Can you get irons refinished?
Founded by Jim Kronus, The Iron Factory began as the first and only golf club iron refinisher in the United States. Since then, we have perfected the process of repairing, rebuilding, and refinishing over a million clubs for both professional and amateur golfers.
How do you refurbish a golf iron face?
0:004:48DIY Golf Club Restoration - Reconditioning the Club Face TutorialYouTubeStart of suggested clipEnd of suggested clipSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do you clean oxidized golf clubs?
Fill a bucket with warm (not hot) water mixed with dish washing liquid or liquid soap. Soak the clubs for five minutes or so and then wipe them with a cloth. If the rust is purely on the surface, this may be sufficient to remove it and will not cause any damage to your clubs.
extra services
We can also regrip or reshaft your club while we're refinishing the head. You can even send us your own shaft and grip and we'll assemble it professionally for you. Ask about these services in your e-mail.
shipping
WHEN YOU SHIP your clubs it is important to include WRITTEN INSTRUCTIONS detailing the work you want done: color, shaft, flex, length, grip, loft and lie specs, etc. We want your order to be completed correctly and promptly.
What is refinishing golf clubs?
Refinishing golf clubs is a fairly simple process that will give you an opportunity to try new things with old clubs. Whether you want a new look on your putter head or a different flex on your shaft, refinishing clubs at home is a great way to try out new technology.
How long does it take for a golf club to dry?
If you will be refinishing multiple clubs, the process might take several days--clubs need to dry for about 12 hours at different stages of the process.
How to twist a clubhead off?
Once the epoxy begins to break down, you can twist most clubheads off by hand. When the shaft is removed, clean out the hosel, then apply epoxy to the new shaft and the interior of the hosel. Insert the shaft into the hosel and let dry overnight.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
How to paint a driver's sole?
Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.
Can you use steel wool on a driver?
Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.