For long-term storage, bring those golf clubs into your home, or put them in some other interior location that is dry and temperature-controlled. Before you store golf clubs over the long term, give them a cleaning. Clean the clubheads and grips and wipe down the shafts.
How to replace a graphite shaft on a golf club?
How to Replace a Graphite Shaft on a Golf Club. 1 Step 1. Remove your old graphite shaft. There are two ways to do this step. One way to loosen the shaft from the clubhead is to heat the hosel, or ... 2 Step 2. 3 Step 3. 4 Step 4.
How do you store your golf clubs?
To sum up, the most-important things to remember about how to store golf clubs: 1 Make sure they are dry before you put them away. 2 If putting them away for more than a few days, clean them first. 3 And keep them in a dry, temperature-controlled location—inside your home is always the first choice. More ...
Do you put tape on your graphite shafts?
I put tape on my graphite shafts from new. Just renewed it a few weeks ago, the shafts were as new under the tape. I extended my sock type headcovers with some old football socks. Protects the full length of the shaft now.
Can you store golf clubs in the garage over the winter?
If your garage is not temperature-controlled, then don't store golf clubs there over a winter. Constant exposure to cold won't damage the clubhead or shaft, but could dry out the grips and cause them to harden or crack.
Where is the best place to store golf clubs?
While the garage is a better option, it's still an environment that is not temperature controlled. The ideal choice is to keep your clubs in a safe space or closet area inside the home, and maintain them with regular cleaning, ensuring both clubs and bag are dry before being stored.
How do you protect graphite shafts?
Long-neck head covers are one way to protect graphite shafts from nasty scratches, but generally just keeping them clean is the best thing to do. Since solvents can break down the polyurethane layer, it is advisable to clean graphite shafts with water and a soft cloth.
Is it OK to keep golf clubs in trunk?
Protect your investment by not leaving your clubs in a hot car, damp shed or garage. A golf shaft can corrode causing the metal to weaken and break during use. Treat your clubs as you would any other piece of equipment and they will last for years to come.
How should I store my new golf clubs?
Here are eight easy ways to take care of your golf clubs.Store your golf clubs properly. ... Never put your golf clubs away when wet. ... Use a golf towel. ... Use head covers on your woods. ... Clean the club heads between plays. ... Don't forget to clean the grips. ... Regularly inspect the grips for wear and tear.More items...•
How do you protect a golf club shaft?
To protect your golf clubs when flying, use extra golf towels, bubble wrap, or packing material to take up the extra space. Weave these between the club shafts to ensure they don't rub together in transit.
How often should you clean golf clubs?
Cleaning Routine A recent survey of 500 golfers found that golfers clean their clubs at different stages. 50% clean their clubs during or after every round. 22% clean their clubs after every few rounds. 15% clean their clubs approximately every 3-6 months.
Can cold weather damage golf clubs?
Constant exposure to cold won't damage the clubhead or shaft, but could dry out the grips and cause them to harden or crack. To sum up, the most-important things to remember about how to store golf clubs: Make sure they are dry before you put them away. If putting them away for more than a few days, clean them first.
Can you store golf clubs outside shed?
No the golf club won't crack but leaving a club outside during hot weather can damage the grip if the temperature gets higher than 68 degrees Fahrenheit. You should also avoid storing your golf clubs in the sun or any other hot environment.
How should I store my golf clubs in my bag?
0:302:46Golf Equipment : How to Organize Golf Clubs in a Bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i've got my shortest clubs in the middle a little bit longer clubs on the top middle right and myMoreSo i've got my shortest clubs in the middle a little bit longer clubs on the top middle right and my longer irons middle left then my woods i always put to the top of the bag.
How do I stop my golf shaft from rusting?
1:182:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemember steel wool is your friend.MoreRemember steel wool is your friend.
How do pros clean their clubs?
1:242:13Best Way To Clean Your Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo go ahead and take that soap. And warm water scrub. Your grip go ahead and dry it down with theMoreSo go ahead and take that soap. And warm water scrub. Your grip go ahead and dry it down with the towel. And you're gonna notice that the grip is actually gonna be more tacky than it was originally.
Do wire brushes damage golf clubs?
A wire brush — particularly the kind you buy in a golf supply shop — is safe and won't scratch up the faces of your clubs. (It is advised not to use a wire brush on the top of the driver's head, as it could scour off the enamel.)
Where to store golf shoes when emptied?
When your golf bag is emptied out, we recommend undoing the laces on your golf shoes and storing them in the largest pocket of your golf bag. This will help keep them with your golf gear. You will then want to put on your golf bag’s rain cover and store it in a dry part of your garage.
How to avoid rust in golf clubs?
As mentioned above, be sure to put them in a dry area of the garage to help avoid rust. Before you retire your golf arsenal for the season, be sure to do the following: Clean your golf clubs: This is a commonly missed step for most golfers. Cleaning your golf clubs should be something you do after ever round (or every shot).
Why do you leave golf clubs in the trunk?
Leaving your golf clubs in your trunk all summer leaves you at risk for damaging your clubs. The main reason for this is that heat is amplified in the trunk. While your clubs aren’t going to melt in your trunk – the glue and epoxy that holds the club head onto ...
How hot should my garage be?
If your garage is temperature controlled (stays between 40 – 80 degrees), you have nothing to worry about! Feel free to store them anywhere – be sure to keep them in a dry area of the garage to avoid rusting.
Can heat damage golf clubs?
As we mentioned above, heat can damage golf clubs. While heat can damage them, severe cold can also damage golf clubs. When clubs are exposed to extreme cold temperatures they can suffer in the same manner they do from extreme heat. The epoxy is at risk and your grips can become more brittle. While lower temperatures aren’t as damaging as heat, it ...
Should you clean golf clubs after every shot?
Cleaning your golf clubs should be something you do after ever round (or every shot). However, cleaning them before hanging up your clubs for the season is more important. Leaving the dirt and other crud in the grooves can cause rust and damage to your clubs over the winter.
Why use graphite shafts?
Generally, graphite shafts are lighter than steel shafts which is why they’ve been used to increase swing speeds for players with a slower tempo like junior and senior players . And muted vibrations of graphite shafts compared to their steel counterparts can make the game more enjoyable for players who have arm, hand or shoulder pain.
Why do you get more feedback when you play with graphite?
Also, you may find you get more feedback in your hands when playing with graphite because the fibers transfer energy well and are just not as hard as steel. When you take the immediate benefits of graphite shafts, it’s easy to see why the “older player” trope of graphite has taken hold.
Do PGA Tour players use graphite iron shafts?
PGA TOUR players don’t use graphite iron shafts. MISLEADING. Graphite iron shafts have been used by PGA TOUR professionals for decades including FedExCup Champion Brandt Snedeker and US Open Champion Bryson DeChambeau. There’s also a third option in iron shafts which may eventually fall into the “best of both worlds” category.
How to remove graphite from a shaft?
A graphite shaft has a protective coating, so you must remove it from the tip of the shaft by carefully peeling it off with a putty knife. Then using sandpaper, rough up the tip so that it will bond tightly with the clubhead. If the inside of the hosel is smooth after you have cleaned it, use a wire drill bit to rough it up, as well.
How to loosen a club shaft?
There are two ways to do this step. One way to loosen the shaft from the clubhead is to heat the hosel, or connector, of the clubhead with a blow torch until the epoxy that is used to bond them together becomes liquid. Be sure that you wear protective glasses while doing this process. The second way is to cut the shaft right above the hosel ...
How long does it take for epoxy to set on a golf club?
Allow about 24 hours for the epoxy to completely set before you finish your golf club. Decide on the length of the club, then mark it where the cut should be made. Since the graphite shaft might shatter when cut, put on a few layers of tape on the cut line before you use a band saw to cut it.
How to use epoxy on a hosel?
Mix a small amount of epoxy and spread it liberally inside the hosel, making sure that all the surfaces are covered. Do the same with the tip of the shaft; and if a ferrule, or a piece of plastic that goes onto the shaft and butts against the hosel, is to be used, put a small amount of epoxy on it an place it on the shaft.
Step 1
Place the hooked blade under the lip of the grip and cut vertically through the grip, being careful not to scratch the shaft. Grasp the grip at the bottom and pull it off.
Step 2
Peel the grip tape off the shaft by hand. Loosen any remaining tape by heating it with a blow-dryer or a heat gun and then peeling it off.
Step 5
Slide the extender into the hole and rotate it as you push the extender into the shaft to spread the epoxy.
Step 7
Place the shaft in a rubber shaft clamp and secure the clamp in a vise.
