If your golf driver head is damaged, there are a few things you can do to fix it. You may be able to find an online tutorial on how to repair a golf driver head. Another option is to search for a local golf shop that can help with repairs or replacements.
Full Answer
How do you remove an old shaft from a driver head?
Removing the old shaft: Removal of the old shaft requires separating it from the driver club head. Most driver heads are attached to shafts by an epoxy-type adhesive that can be softened by applying heat with a butane torch.
How do you remove a broken shaft from a golf club?
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft. Head and shaft will be hot.
How do I re-shaft my driver?
As far as learning how to re-shaft your driver, there are two processes involved: 1 Removing the old shaft: Removal of the old shaft requires separating it from the driver club head. Most driver heads are... 2 Installing the new shaft: With the old shaft removed from the head, installing the new shaft is a matter of measuring... More ...
How do you remove epoxy from a golf club head?
Use a blowtorch or a heat gun to loosen the epoxy that fused the shaft to the club head. Depending on the age of your club, it could take a minute or two before the epoxy begins to liquefy. Once it melts, carefully remove the shaft from the club head, take off the ferrule from the shaft and set it aside.
How much does it cost to replace a driver head?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
How much does it cost to fix a golf club head?
Club RepairCLUB REPAIR PRICINGReshaft – Standard Head (Labor Only)$251Reshaft – Bore Through Head (Labor Only)$351Shaft Orientation (Spineing) – Included in reshaft price$254Shorten Shaft (Labor Only)$323 more rows
How do you replace a golf driver head?
0:045:16Golf Club Repair - Removing the driver head and cleaning & preppingYouTubeStart of suggested clipEnd of suggested clipWe can take the old shaft out of the shaft extractor here pretty easy to get the old shaft out justMoreWe can take the old shaft out of the shaft extractor here pretty easy to get the old shaft out just loosen up the screws. Take the protective film off the shaft. So you don't scratch it.
Can you change the head on a golf club?
Use a blowtorch or a heat gun to loosen the epoxy that fused the shaft to the club head. Depending on the age of your club, it could take a minute or two before the epoxy begins to liquefy. Once it melts, carefully remove the shaft from the club head, take off the ferrule from the shaft and set it aside.
Can you fix a broken driver head?
Can you repair a cracked driver? A cracked golf driver in most cases cannot be repaired but can be replaced. In pro golf stores, the golf shafts can be replaced with a new one to make you kick start afresh.
Can you fix a broken golf club head?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
Can you put any driver head on any shaft?
Yes, most golf Driver shafts are interchangeable. Golf driver shafts can be replaced as long as the new shaft is the same length and made by the same brand of golf club.
Why did my driver head break?
This occurs due to incorrect positioning and technique. Clubs are not designed to make contact with the ground. Making fat shots repeatedly can cause the head to break apart from the shaft. In some cases, the shaft can break completely in half.
How hard is it to change driver shaft?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Can you replace a broken driver during a round?
A player is allowed to keep using and/or to repair any club damaged during the round, no matter what the damage and even if the player damaged it in anger.
How do you put a driver head on a shaft?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.MoreRemove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix. And then install into the head rotate.
Can you play with a damaged golf club?
A player is not allowed to replace a damaged club, except when it is damaged during the round by an outside influence or natural forces or by someone other than the player or his or her caddie.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
How much does it cost to replace a ferrule Golf Club?
Remove Rattle: easy fix -- $5.00 / hard fix -- $20.00. Replace Ferrule -- $12.50. Repair Ferrule -- $5.00.
How much does it cost to change lie angle?
They normally charge $3 to $5 per club to make adjustments, so this could save you some cash if you can get them to throw it in.
Can you repair a cracked driver?
A cracked golf driver in most cases cannot be repaired but can be replaced.
How to fix a cracked golf driver?
The following steps can be followed to ensure that a cracked golf driver gets fixed:
Will TaylorMade replace a cracked driver?
Taylormade guarantees its customers that it would take care of defects in workmanship and materials during normal usage if arrived at within the first 2 years of purchase from an authorized dealer.
How to get epoxy off of head?
Apply pressure on the side of the head till the epoxy bond gets softened. Once it gets softer it should come off easily.
Why is ping so popular?
PING has made a mark due to its prowess in controlling the swing speed and control of the weight. After sales service records of PING have not received much complaints from consumers and hence there is hardly any hassle to get a cracked driver replaced from PING.
What type of heat is used for graphite shafts?
The level of heat to be used varies from one kind of shaft to another, while medium heat is used for graphite shafts, higher heat levels can be used for steel shafts. Wait for the adhesive to melt away post which the broken shaft has to be pulled from the hosel where the shaft joins the club head.
What happens if a golf club is cracked?
If the club is continued to be used with a crack, it would shatter and eventually break into two pieces.
How to remove a shaft from a golf club?
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.
How to wrap a golf grip?
Apply the double-sided grip tape to the length of the grip wrapping it around the shaft . Leave 1/2 inch overhang in order to fold in the end of the shaft.
How to clean epoxy from golf club head?
Use a wire brush to clean out the remains of the old epoxy from the club head.
How long to hold a golf club shaft?
Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.
How to remove a ferrule from a hosel?
The ferrule is the small plastic band that sits just above the hosel. With a utility knife or box cutter, cut a vertical slit in the ferrule. Using a flathead screwdriver or pliers, pry the ferrule from the shaft and discard it.
How to get glue out of a golf club?
Heat the glue inside the hosel. The hosel is the area where the shaft fits into the clubhead. Light your propane torch and apply heat to the underside of the hosel. This will melt the glue. As you apply heat, grab the clubhead and gently turn it to begin working it out. Avoid cranking with too much force.
How to get rid of loose glue?
Twist it to remove loose glue. A small amount of mineral spirits will help clean out the area.
Do you need to reshaft a golf club?
The need to reshaft golf clubs is common. It is sometimes necessary to have a professional tackle a complete reshaft job; however, it can make his job easier if you eliminate a step in the process. Removing a golf shaft from the head is fairly simple; however, it must be done carefully and properly.
Who is Jim Hagerty?
Writer Bio. Jim Hagerty is a writer and journalist who began writing professionally in 1996. He has had articles published in the "Rock River Times," "Builder's Journal" and various websites. He earned a Bachelor of Science in public relations and journalism from Northern Michigan University in Marquette.
How to install a new shaft on a golf club?
Prepare the hosel of the club head for your new shaft by removing the old epoxy from inside it. The easiest way is to first put the club head into a vise , making sure you don't damage it. Then use a hand drill to carefully remove the debris. Make sure that the hosel is totally clean before you begin installing your new shaft.
How to loosen epoxy on golf club shaft?
Move the plastic ferrule from its position next to the club head to a position up the shaft so that it will be out of the way and won't be damaged when you apply heat. Step 3. Use a blowtorch or a heat gun to loosen the epoxy that fused the shaft to the club head. ...
How to remove epoxy from golf club?
Use a blowtorch or a heat gun to loosen the epoxy that fused the shaft to the club head. Depending on the age of your club, it could take a minute or two before the epoxy begins to liquefy. Once it melts, carefully remove the shaft from the club head, take off the ferrule from the shaft and set it aside. Since the club head can get quite hot, wear ...
How Much Does it Cost to Replace a Driver Shaft?
Golf equipment manufacturers are becoming more cognizant of the important role that shaft plays in the performance of a driver. After all, the shaft is responsible for transferring the tremendous amount of energy generated by the golfer’s swing to the clubhead, which in turn impacts the ball and launches it into the air. The shaft, therefore, affects ball flight just as much as the head of the driver. (Source: Dick’s Sporting Goods – Pro Tips)
What is extra stiff shaft?
Extra stiff – This class of driver shafts is reserved for low handicappers and golfers who play at a competitive level. Long hitters play with extra stiff shafts on their drivers to not only take advantage of their length off the tee but also to control their ball flight and shape shots according to the course layout. Extra stiff driver shafts are designated with the letter “X.” Extra stiff flex shafts range in price from $30 to $600 (without installation).
What is a regular shaft?
Regular – This is the most common type of shaft flex and suits the typical recreational golfer who can routinely drive the ball 225 to 250 yards. This is an all-around shaft for players who are satisfied with their distance and want to maintain ball control. Regular flex shafts are designated with the letter “R.”
What is a driver shaft made of?
When it comes to material, the overwhelming majority of driver shafts on the market are graphite, which is a composite of graphite fibers and epoxy formed into what is essentially a hollow tube that is comparatively stronger than steel, but only half the weight. (Source: golfclub-technology)
Why is graphite important in golf?
It is the lightweight strength of graphite shafts that enables golfers to generate greater swing speeds , which, in the eyes of many, translates to longer distance off the tee. Since there is so much uniformity in driver shafts as far as the graphite material, the most important attribute as far as the recreational player is concerned is the amount of flexibility in the shaft or the flex . (Source: Golf Magazine)
What is the effect of flex in a driver shaft?
The amount of flex in a driver shaft has a significant effect on not only driving distance but also the golfer’s ability to keep the ball in the fairway (or in bounds, for that matter).
How to install a new shaft?
Installing the new shaft: With the old shaft removed from the head, installing the new shaft is a matter of measuring (and cutting with a hacksaw, if necessary) the shaft to ensure it is of proper length, sanding or filing the tip to provide traction, then applying the special adhesive (epoxy) and inserting the shaft into the clubhead hosel.
