What type of shafts are used in golf clubs?
Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel. Graphite shafts weight between 50-85 grams.
What are the best golf shafts for ball flight?
Tensei CK Pro White shaft is a low-launching and mid-to-low spinning shaft with a stiff tip section. It’s designed to produce a more penetrating ball flight than the Blue version listed above. 8. Aldila RIPX Aldila is a universally recognized brand used by golfers around the world.
How long should a golf shaft be?
Standard Shafts measure in at 45 inches with the maximum allowed by the governing bodies at 48 inches. A longer shaft will increase your swing speed while decreasing the control you can exercise on the path.
What do players look for in a golf shaft?
Generally, players are looking for either Distance, Distance and Control, or Control. With regards to the shaft - The lighter the shaft, the longer the overall club length and more flexible the shaft is (within the players flex range), the greater the potential for distance gain.
What do the letters mean on a golf shaft?
Eventually, the shaft industry developed five different shaft flex designs, designated by the letters L for Ladies; A for Amateur, which evolved into the senior flex; R for Regular; S for Stiff and X for Extra Stiff.
How do I know what my golf shaft is?
5 factors to help you find the right driver shaft for your swingFlex. Generally speaking, a driver shaft that's too stiff will cause shots to launch too low, with too little spin and low peak heights. ... Weight. The weight of a shaft has a similar correlation to performance as flex. ... Length. ... Kick point. ... Torque.
What is TS flex shaft?
So the TS are short for Tour Stiff. This is a flex that is stiffer than traditional S flex but softer than X flex within the same family of shafts.
How do you know what shaft stiffness to use?
Take a look at the distance you hit your driver. This is a good, but very general, indicator. If you carry you driver 250 yards or more, go with Stiff; 230-250 yards, Regular; 200-230 yards, Senior; less than 200 yards, Ladies. Only the biggest of the big hitters is going to need Extra Stiff.
What does P mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge.
What is a 5.5 flex shaft?
Regular – 5.0. Regular Plus – 5.5. Stiff – 6.0. Extra Stiff – 6.5. Extra Stiff Plus – 7.0.
What does SR mean on a ping shaft?
SR stands for Stiff / Regular, which is a very common flex for Japanese clubs. Great for players that are currently playing a Stiff flex and finding it slightly hard but have experienced difficulty with the Regular.
Is Tour stiff and extra stiff the same?
Stiff shafts are for golfers that swing fast; the extra stiff are for those that swing exceptionally fast.
What driver shafts do pros use?
Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.
What flex do I need for my irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What flex do I want on my driver?
If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.
Will a stiffer shaft help my slice?
If you are struggling with a hook it might be because your shaft is too flexible, try a stiffer shaft, this will help keep the face square at impact, and prevent the face from turning over. If you are struggling with a slice you might be playing with a shaft that is too stiff for you.
What are the different types of golf shafts?
There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type. There are some newer options that combine the two materials, ...
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
How important is shaft length?
Once the shaft is installed onto your golf club, you must determine the right length for you. But how important is shaft length, we hear you say? Well, the importance of length, according to research, is extreme. For instance, ball impact that is 0.5 inches off-centre equates to a 7% loss of carry distance, and an impact that is 1 inch off-centre equates to a 14% loss of carry distance. So, the key to choosing the right shaft is finding the correct length that provides a repeating, solid hit each time.
Why is it important to choose the right shaft for golf clubs?
It can give you the best chance at striking the center of the face that will result in optimal launch conditions on the course. It absolutely has an effect on how well you can play.
What does it mean to choose the wrong shaft for a golf club?
Choosing the wrong shaft will make it much harder to access the center of the face more consistently on the course , and the last thing we want you to do is to make golf harder on yourself!
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
What is the difference between stock shafts and aftermarket shafts?
The difference between stock shafts and aftermarket shafts is usually found in quality control. Many times the bigger OEMs will strip off the paint of last year’s model and give them a new exterior. The graphics look attractive, but you really have no idea what is beneath it.
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
What is fitting in golf?
When we put a customer through a fitting, we determine the right profile, weight, and flex that is required. Essentially we are writing a prescription for the golfer’s swing, and order the shaft to match what we believe will help them the most.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
What is flex in golf?
Flex: This measures the ability of a shaft to bend under the force of a golf swing. Generally, slower swing speeds find better performance from more flexible shafts (ladies, senior, regular flex), whereas faster speeds need less flex (stiff or x-stiff flex)
What is the kick point of a golf club?
Kick point: This is the area of a shaft that will bend most during the swing. A low kick point is toward the head, a high kick point is toward the grip, and a mid kick point is near the center of the shaft. Kick point will influence how the club feels and what trajectory the ball launches at.
What is the difference between low torque and high torque?
Torque: This measures, usually in degrees, the shaft’s resistance to twisting. Low torque (around 2-3 degrees) means it doesn’t twist, or torque, much at all, whereas high torque (around 5+ degrees) means the shaft twists a lot. Low torque generally works better for high swing speeds, whereas high torque fits best with slower swing speeds.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
How much does a graphite shaft weigh?
Graphite shafts are also much lighter weight (50-85 grams) while steel shafts can start at 120 grams in most cases.
Why do you need a shaft in golf?
The right shaft can help you play your best golf, prevent injury, and allow you to make improvements instead of compensations.
How to know if a shaft is the right one?
Testing out different shafts to see how they perform for you is really the only foolproof way to figure out if a shaft is the right one. Sometimes the best shaft on paper isn’t the best in real life, so the testing portion is absolutely crucial. As you test out different shafts – aside from strictly performance – take note of how a shaft feels. If it’s too harsh or too soft, verbalize that to your fitter. If the shaft doesn’t feel right to you, that’s probably for good reason.
What is flex in golf?
Flex: This measures the ability of a shaft to bend under the force of a golf swing. Generally, slower swing speeds find better performance from more flexible shafts (ladies, senior, regular flex), whereas faster speeds need less flex (stiff or x-stiff flex)
How to test shafts?
The most effective way to test out shafts is to minimize variables as much as possible. You want an apples-to-apples test between two or more shafts, so if the fitter has a system such as Club Conex, it’s a huge win. The Club Conex hosel system will allow the fitter to interchange any shaft with any head, so you can test out a variety of shafts in the same head.
What is the difference between low torque and high torque?
Torque: This measures, usually in degrees, the shaft’s resistance to twisting. Low torque (around 2-3 degrees) means it doesn’t twist, or torque, much at all, whereas high torque (around 5+ degrees) means the shaft twists a lot. Low torque generally works better for high swing speeds, whereas high torque fits best with slower swing speeds.
How to minimize errors in golf shaft?
To minimize any errors, make sure you get confirmation from your fitter on exact shaft specifications that you need. That way, you can pass along these measurements to the person who’s actually building your clubs. For example, if you got fit into a shaft that is supposed be 44.5 inches and tipped 1 inch, but the builder forgets to tip the shaft, it may perform much differently than the shaft you actually got fit into.
What is the most important thing about a golf club?
The shaft doesn’t make contact with the ball, and you’re not technically holding onto it either. But, the shaft is arguably the most important aspect of a golf club; it’s the engine that can make or break your performance on the golf course.
What are the characteristics of a golf shaft?
Golfers often want to know about the three main characteristics of a golf shaft: weight, kick point, and torque. In this video, you will learn how these three specs are actually connected and how they affect each other.
What does the shaft do in golf?
Having the right shaft in your golf clubs makes a world of difference to your game. The shaft affects club performance on everything from spin, launch, and speed. The wrong shaft could cause the ball to launch too high or too low as well as spin too much and cause you to lose distance.
Can you get custom golf clubs from TGW?
Now that you have learned a few things about picking the right golf shaft, it’s time to get your clubs customized to help you play your best! At TGW, we have an incredible selection of custom golf clubs. All of our custom golf clubs are built by the manufacturers so you can trust you are getting the best possible club for your game. Start shooting lower scores and see the difference the right golf shaft can make in your game today.
Why is my golf ball inconsistent in all directions?
Improperly fit shafts can cause inconsistency in flight direction, due to the mismatched flex characteristics of the shaft to the player, and the players perception and compensation for the mismatched flex. Generally, too flexible a shaft can cause inconsistent directional ball flight in all directions. Too stiff a shaft can lead ...
Can club fitters analyze data?
Yes, we as club fitters can analyze data we acquire on many of the wonderful launch monitors that are available, and narrow down choices based on the data. This does take some of the guess work out of the decision and gives us performance data to base a decision on.
Do shafts always equal performance?
A broad range of prices exist in the shaft category. Price does not always equal performance. From a performance standpoint, shafts should be chosen based on their specifications and how those specifications fit the players swing characteristics, providing the desired trajectory, feel and consistency.
Who makes golf shafts?
Accra is one of the lesser-known shaft manufacturers in the amateur game but has been supplying shafts to professional golfers for decades.
How many inches are shafts?
Shafts measure in at 45 inches with the maximum allowed by the governing bodies at 48 inches.
What is a Fujikura shaft?
Fujikura is a celebrated company that has built a standing for delivering quality shaft for all types of drivers. It’s one of the best graphite shafts on the market today. The Fujikura Vista Pro 60 shaft is specifically to upgrade your TaylorMade driver that has lost its snap.
What is the best driver shaft for distance?
A lightweight graphite shaft ideal for golfers with a slower swing speed and is considered one of the best driver shafts for distance.
How much does a graphite driver shaft weigh?
Graphite driver shafts between 0.12 to 0.13 pounds for men and 0.09 to 0.11 pounds for women.
How does tip flex work?
This is measured by clamping the tip end and applying weight to the butt end of the shaft.
What is graphite shaft?
Graphite shafts are made from carbon fiber strands for weight reduction. Carbon fiber is more expensive thus making it more expensive. Since the material is available in a variety of colors the major brands can add a variety of descriptions and branding onto the graphite shaft.
