Three big-name players use the Bettinardi putters on the PGA Tour: Jason Kokrak, Matt Fitzpatrick, and Matt Kuchar. Kuchar uses the Bettinardi DASS KM-1 Arm Lock putter, Fitzpatrick has the DASS BB1 Flow Tour Dept, and Jason Kokrak has the Studio Stock 38 putter in his bag. #4 – TaylorMade
Full Answer
What is an argolf putter?
Argolf putters are for golfers who seek the highest-quality putter available for a price in the range of other fine putters. Three active PGA Tour Champions players currently play with Argolf putters. Why should a golfer buy your putter instead of another premium putter, such as a Scotty Cameron or a Bettinardi?
What putter do the PGA Tour pros use?
The Stroke Lab, White Hot, O-Works, and Toulon Model are the most popular, with other models like the 2-Ball and Tri-Hot being used by some players. The list of tour pros using an Odyssey putter is a who’s who of the top players. While I’m not going to list all 44 players, here is a glimpse of the models used by some of the PGA Tour’s very best:
Which PGA Tour players use the Bettinardi putter?
Three big-name players use the Bettinardi putters on the PGA Tour: Jason Kokrak, Matt Fitzpatrick, and Matt Kuchar. Kuchar uses the Bettinardi DASS KM-1 Arm Lock putter, Fitzpatrick has the DASS BB1 Flow Tour Dept, and Jason Kokrak has the Studio Stock 38 putter in his bag.
What are the rules of the USGA for putters?
USGA Rules on Putters 1 Putters Defined. Appendix II, Section 1a of the Rules of Golf describes three different types of golf clubs: Woods, irons and putters. 2 Length. All golf clubs, including putters, must be at least 18 inches long. ... 3 Club Head. ... 4 Other Standards. ...
Which putter is used most on PGA Tour?
65% of the top 100 PGA Tour golfers use mallet putters with the other 35% choosing blade putters. Odyssey and Scotty Cameron putters are the next most used within this elite group with 30 players each using them. PING and TaylorMade putters are used by 15% and 14% of the top 100 respectively.
Do any PGA Tour players use Evnroll putters?
The putter is also available with Evnroll's new Gravity putter grip. Over 20 players on all major professional tours are using an Evnroll to earn their living.
What kind of putter does Phil Mickelson putt with?
Which putter does Phil Mickelson use? According to reports, Mickelson has been using the Odyssey Stroke Lab Black Ten putter as well as an Odyssey Versa #9 model. Having said that, Mickelson apparently leans towards the “Odyssey White Hot XG Blade PM” these days.
Do any pros use Rife putters?
Week in and week out several players on the PGA, Champions and Nationwide Tours rely on Rife's RollGrooveTM Technology to earn their paychecks. With over $25 Million in earnings and no endorsed players, its obvious that Rife Putters has found that for the Tour Players, winning is everything.
What kind of putter does Rickie Fowler use?
In 2021, Fowler used a Cobra putter for the first time in his PGA Tour career, and most recently, he's been using a TaylorMade Spider GT putter. This week at the 2022 Wells Fargo Championship, though, he showed up with a custom Cobra 3D-printed Stingray 20 that's a bit different than the retail model.
What is the number 1 putter on tour?
Jin Young Ko (current Women's World No. 1) uses the Taylormade Spider X. It is the most widely used putter on the PGA tour. It is the most widely used putter on the LPGA tour.
What is Mickelson's putter?
Odyssey PM BladeOdyssey PM Blade On the greens, Mickelson had been using an Odyssey Stroke Lab Black Ten putter as well as an Odyssey Versa #9 model. However the classic-styled Odyssey PM Blade is his current choice.
What putter does Justin Thomas use?
In 2020, Thomas and Scotty Cameron celebrated his success with the putter by releasing a collaborative Phantom X5. 5 putter, which was inspired by Thomas' custom putter. Scotty Cameron released 2,020 limited-edition putters to the public.
What putter does Dustin Johnson use?
TaylorMade Itsy Bitsy Spider Limited putterBy the time the first round starts, Johnson is usually back to using the all-black TaylorMade Itsy Bitsy Spider Limited putter he used to win the 2020 Masters.
Who owns Rife putters?
InnovexRife no longer has any association with Rife putter company, which was sold to Innovex, a company known for its multi-piece golf balls, in late 2011. But he's back in the game with his new putter company, Guerin Design Putter Co.
Who owns rife?
Innovex GolfInnovex Golf announce that they finalised an agreement to acquire Rife Putters, LLC, formerly the #1 Putter on the Champions Tour, on Friday, 18th November.
Who makes Evnroll putters?
Guerin RifeGuerin Rife, Company CEO and chief designer, has been creating putters for 25 years starting with the very first cavity mallet. Best known for creating the famous Two Bar putter, he has designed over 40 models that have been used to win over 100 tournaments worldwide on all professional tours.
How many inches of putts did Na make?
Key putting stat: Na made a PGA Tour record 558 feet, 4 inches of putts over the four rounds. His strokes gained/putting mark for the week was an unheard of 14.516 strokes better than the field.
Is the PGA Tour complete?
The 2019-20 PGA Tour is now complete, and as we often see, a hot putter is a big reason that each of these winners have lifted trophies in the 2019-'20 season. Employing a variety of shapes and styles, the putters used by those players are as varied as their strokes. TaylorMade's sweep of the FedEx Cup playoffs allowed them to have ...
What is an argolf putter?
Argolf putters are for golfers who seek the highest-quality putter available for a price in the range of other fine putters. Three active PGA Tour Champions players currently play with Argolf putters.
What is STX Arthur made of?
The Arthur is also built from 304L stainless rather than the typical 303 stainless. A few years ago, STX was milling their heads from 304 stainless and if you remember, that stainless was significantly softer than 303, so much so that it tended to gum up the mills more in production.
What is the metal used in Argolf putters?
Every Argolf putter is derived from a solid block of aluminum, stainless steel or, ...
How does Arthur deviate from Anser-ness?
The Arthur deviates from Anser-ness by having shallow heel and toe bumpers, and an absence of cavity milling. The bumper morphology definitely changes the appearance at address, but it doesn’t feel like the change had a negative impact on MOI, at least as it relates to twisting through the swing.
What is the legend of King Arthur about?
For centuries, the story was a serious discourse about power, love, betrayal, incest, and good versus evil.
Where is Argolf located?
Argolf is a French golf company whose goal is to produce the finest premium putters in the market. Their location in northern France connects them to the Arthurian legend, a connection that lives in the precision metal crafting and engineering found in their putters. Since many of you have never heard of Argolf before today, ...
Is Argolf a premium putter?
Argolf putters are premium putters, and as such they carry the associated cost. Overall, I am impressed with the quality of the putters and with the design tweaks on the Arthur and Lancelot to make them fresh takes on those classics. The Pendragon is the real standout though.
What type of putter should I use for putting?
Beginners should use a mallet putter to help them develop their putting. More experienced golfers prefer laded and high MOI putters. As with everything in golf, there’s no set in stone, right or wrong answer for what type of putter you should be using. It comes down to practice and confidence with the putter in hand.
What is a blade putter?
Blade putters are the lightest type of putter you can purchase . Named because of their thin, streamlined putting heads, bladed putters are typically made of forged cast iron and usually have a narrow cavity back. They are the cousin of the muscle back bladed iron and are similarly less forgiving than a bladed iron.
How to putt a golf ball on a green?
Grab yourself a golf ball, two plastic rods, or sticks, and place the ball in the middle of the two alignment rods. Next, grab your putter and address your shot as if you were about to putt on a green. Initiate your backswing, and just as you get to the top of your backswing, stop and hold that position.
What are the different types of putters?
There are typically three different types of golf putters: Blade putters; High MOI putters; and. Mallet putters. Which putter is best for you depends on your putting stroke, your stance, and how comfortable you are with the weight of each putter. Ultimately it comes down to personal preference and how each golfer strikes the ball on ...
Why do professional golfers use high MOI putters?
Many professional golfers, like 2021 Masters champion Dustin Johnson, like to use high MOI putters because of the greater control these clubs give them on harder, faster greens. If you’re looking for a performance-enhancing high MOI putter, check out the TaylorMade Spider.
Why is a putter important?
He now uses a putter that is better for his back and ensures he’s a lot more comfortable when putting. As putting is one of the easiest parts of your game where you can save shots, your putter is perhaps the most important club in your bag.
What is the best putter for a golf ball?
That allows you to hit up onto the ball to hit a truer roll on the golf ball. One of the best-bladed putters on the market is the Odyssey White Hot Pro , which has a large sweet spot that produces a great contact with the golf ball and a truer roll on the ball.
How long should a golf club be?
Rule for Length. In general, the maximum length of a golf club should not exceed 48 inches and the minimum length should be 18 inches but there are no such restrictions for the length of putters in particular.
What are the requirements for a putter with two grips?
The putter with two grips must meet the following conditions: The two grips must-have circular cross-sections. One circular and another non-circular is not permissible. The two grips must be separated from each other by at least 1.5 inches otherwise they would be considered as a single grip.
What is the loft of a putter?
As per the definition, the putter is a club whose loft cannot be more than 10 degrees. However, the negative loft is permitted but it should be strictly within 15 degrees. The Equipment Rules in golf do not differentiate much between the Wood and Iron but for Putters, the story is not the same.
What is the lowest part of a golf club?
The clubhead is the lowest part of a golf club which is used to strike the ball. Clubhead head is the only part that comes in direct contact with the ball.
What is the longest club in golf?
A wood in golf is a club that is designed to hit the longest shots. It is also the longest club which you can keep in your golf bag. The Wood has a long shaft, large hollow head, and with the least loft. 1-Wood is called the driver, 3-Wood is called a fairway wood while the woods with higher degrees loft such as 7,9 and 11 are called utility woods.
What are the rules of the USGA?
USGA RULES: CLUB FACE. General. Putters. Just like any other sport, Golf also has its own rules, formulated to promote fair play and to maintain the discipline of the game. The USGA and R&A have formulated various rules with reference to the clubs, golf course, golf ball, golf course gloves, etc.
How long should a grip be on a golf cart?
The grip should be fixed, plain, extend up to the end of the shaft, and shouldn’t be molded for any part of the hand. The minimum length of the grip is 7 inches.
Most Popular Putters on The PGA Tour
- The 5 most popular putters per number of players on the PGA Tour are as follows: So, let’s look at the 5 most popular putters on the PGA Tour in more detail, starting with the least popular.
Bettinardi
- Those who haven’t heard of this company were founded in 1998 by Roberto Bettinardi, who used his passion for golf and completely turned the putter world on its head when he designed it using a single block of steel. Bettinardi coined the idea of a ‘one-piece technology,’ and his approach revolutionized the manufacturing process. Before that, putter makers used forged, welded, and c…
Taylormade
- TaylorMade’s Spider putter in various models is one of the most popular putters on Tour, and players that use this putter model include the likes of Sergio Garcia, Rory McIlroy, Dustin Johnson, and Robert MacIntyre. The Spider putter looks like a mallet, feels like a blade, yet offers tons of forgiveness. It gives you a firm feel and incredible sound while increasing topspin and enhancin…
Ping
- There are currently 18 PGA Tour Players with PING Putters in their bags. Bubba Watson, Corey Conners, Lee Westwood, Joaquin Niemann, Louis Oosthuizen, Tony Finau, Tyrell Hatton, Stewart Cink, and Viktor Hovland. Of the 18 players, eight are using various types of the PLD model, with Bubba and Joaquin Niemann using the Anser Prototype, Conners havin...
Titleist
- Not surprisingly, the same brand that dominates the wedges played on Touralso places well on the short grass. Titleist’s Scotty Cameron putters are very popular with the top players and the golf-playing public, so it’s no wonder they place as the second most popular putter on the PGA Tour. With 34 players using Titleist putters on the Tour, there is a big gap (almost double) betwe…
Odyssey
- It seems that when it comes to putters, the most popular putter is made by a brand that onlymakes putters, and the second most popular brand also started as a putter-only manufacturer. When it comes to the top two, the specialists in putters dominate, and Odyssey is well ahead of Titleists’ Scotty Cameron on the PGA Tour. There are 44 Tour players with Odysse…
Final Thoughts
- When it comes to the most popular putters on the PGA tour, the trend that dominates choices is around manufacturers specializing in putters. Between Odyssey and Titleists’ Scotty Cameron, they have 70% of the market in the top 5 brands. As seen with the domination by Titleist with their Vokey range of wedges, the pros prefer specialist clubs made by brands that focus on those spe…