
What color is the Jetspeed driver head?
The streamlined head of the Jetspeed driver features a black crown with an exclusive tonal decal that enhances authentic alignment. The color pattern of these drivers’ black, gray, and blue graphite shaft matches with the head of this driver for a consistent and sleek look.
Are TaylorMade Jetspeed head shafts the same?
Two TaylorMade Jetspeed drivers were tested (one with a shaved face/the other stock). Both were tested at 9.5°. The same shaft was used for both heads, swapping the heads out every three shots. The shaved Jetspeed was milled to COR of .880, WHD’s recommendation for swing speeds between 100-110 mph.
What is Jetspeed technology on TaylorMade rocketballz golf clubs?
It has updated its Rocketballz golf club line with its Jetspeed technology. Further, this model is the first-ever driver created by TaylorMade to integrate the Speed Pocket technology. Now all the components of this driver are assembled to boost extreme velocity, faster swing speed, clubhead speed, and ball speed.
How much does a Jetspeed driver weigh?
The JetSpeed is long and light (46 inches with a 299-gram total weight), and the stock Matrix Velox T 49 shaft weighs just 50 grams. The driver’s head measures 460 cubic centimeters, and it is available in lofts of 8, 9.5, 10.5 and 12 degrees and retails for $299.

Is the Taylormade JetSpeed forgiving?
Bottom Line: If you're in the market for a forgiving driver this year, JetSpeed is a good place to start. It offers the spin and forgiveness many golfers need to hit consistently long drives.
What is loft on Taylormade JetSpeed HL driver?
The standard lofts available with the JetSpeed are 9.5°, 10.5° and 13° (HL). The adjustable loft sleeve allows for the effective loft to be adjusted in increments of 0.5° over the range ±1.5° by unscrewing the hosel.
How do you adjust a Taylormade JetSpeed driver?
1:452:41TaylorMade JetSpeed Driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not user adjustable.MoreIt's not user adjustable.
When was the Taylormade Burner made?
In 1983, the Burner and Tour Burner were introduced and the company boasted 147 tour pros as product ambassadors.
What year was Taylormade jetspeed?
TaylorMade JetSpeed Driver - Product DetailsUK Launch13 December 2013USA Launch13 December 2013Handicap RangeLow HighGolferMensHand AvailabilityLeft, Right16 more rows•Dec 20, 2013
Does higher loft mean less distance?
Less Loft + Upward Angle of Attack = More Distance Low lofts saw more roll after landing than higher lofts, too—six yards more. But these weren't low bullets. The lower lofts yielded the same or longer carry distances because of the group's upward angles of attack.
What degree loft should my driver be?
The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.
What lie angle should my driver be?
between 56˚ and 60˚Most standard driver lie angles will be between 56˚ and 60˚ and there is certainly a school of thought that says lie angle is not as critical a fitting factor in drivers as it is in irons because the combination of low loft and greater shaft droop (how much the shaft bends downwards as you swing it) means misdirected ...
Are TaylorMade burners still good?
Good distance and nice look. If you are in the market for game improvers then the TaylorMade Burner 2.0 irons are worth a try as they are easy to hit and very forgiving. I found them a bit clumsy to look at behind the ball with little finesse but they were very easy to hit and let you get away with a lot.TaylorMade Burner 2.0 Irons Review - Golfalot.comhttp://www.golfalot.com › equipment-reviews › taylorma...http://www.golfalot.com › equipment-reviews › taylorma...Search for: Are TaylorMade burners still good?
When did RBZ irons come out?
2012The RBZ irons were released in 2012. The RBZ Max irons were released in 2012. 2013: RocketBladez used a slot in the sole to deliver more distance and consistency.Photos of TaylorMade irons from the last 35 years - GolfWRXhttps://www.golfwrx.com › photos-of-taylormade-irons-fr...https://www.golfwrx.com › photos-of-taylormade-irons-fr...Search for: When did RBZ irons come out?
What year did R7 irons come out?
TaylorMade R7 Irons Fast Facts: Launch date: November 01, 2008.TaylorMade R7 Irons 2021 Review - Let's Golf Betterhttps://letsgolfbetter.com › taylormade-r7-ironshttps://letsgolfbetter.com › taylormade-r7-ironsSearch for: What year did R7 irons come out?
What is Taylormade JetSpeed driver?
The 2014 TaylorMade JetSpeed driver is a monster in the distance and forgiveness categories, outperforming the RocketBallz Stage 2 driver even as it breaks the mold of how a game-improvement driver is designed . The first TaylorMade driver to fully utilize Speed Pocket sole-slot technology, JetSpeed has enlarged the face’s sweet spot by 25 percent, mostly in the lower portion of the face. This means that miss-hits low will launch higher and travel further, a potent combination that will help you maximize your distance and consistency off the tee. Speed Pocket The first Speed Pocket designed for a driver increases ball speeds on shots low on the face. Low and Forward CG Positioning the center of gravity as low and close to the face as possible increases ball speeds and reduces spin rates, both of which result in more distance. Shallow Face Profile A shallower head shape drives the CG even lower to achieve higher launch angles to complement the low spin aspects of the JetSpeed driver. It also helps to streamline the clubhead to make faster swing speeds possible. Loft Adjustability A shallower head shape drives the CG even lower to achieve higher launch angles to complement the low spin aspects of the JetSpeed driver. It also helps to streamline the clubhead to make faster swing speeds possible. Fitting Message One of the most important clubs in any golfer’s bag is the driver. It can also be one of the most difficult to hit with consistency, so when you’re looking for a new TaylorMade driver you want to be sure you find one that fits your swing and your style. At 2nd Swing our staff is certified in all TaylorMade products and our fitters have received regional TaylorMade Fitters of the Year honors, so you know they are some of the best you can find. By analyzing your swing characteristics in our state-of-the-art facilities, our fitters can help you identify which driver is right for you and customize the length, loft, and face angle to give you longer, straighter, more consistent drives.
How many clubs are needed for a Pitching Wedge?
Iron sets must contain a minimum of five (5) consecutive clubs with matching shafts, including a Pitching Wedge. If a PW is not included, you will be required to enter each of the irons individually.
How much more when you trade in towards a second swing card?
Receive 25% more when you trade in towards a 2nd Swing eGift Card!
How much more credit do you get from 2ndswing?
In fact, you'll get 25% more from your clubs in 2ndSwing.com credit compared to when you sell them outright. Simply select the "eGift Card" option during the trade-in process and your eGift Card code will be emailed to you after your trade-in has been fully received & processed. The eGift Card can be applied towards the future purchase of any new & used item from 2ndSwing.com.
How many rounds has a golf club been played?
Golf club has been played less than 10 rounds and is in top of the line used condition. This club has seen normal usage for an extended period of time, at least one season, has been well cared for, and is still in good used condition. This golf club has been well used, but not abused.
How to contact 2ndswing?
Please contact our Service & Support team at 612-216-4152 or [email protected]. Please have your Order Number ready and reference the tracking number on your shipment to ensure it has been delivered to our facility.
Can you trade in golf clubs?
Absolutely! There is no limit on the amount of golf clubs that you can trade in. You can even find values & trade in your used rangefinder or GPS unit!
How much does JetSpeed save?
If you’re interested in a TaylorMade driver and don’t need the adjustability or spin-killing ability of the of the SLDR, consider the JetSpeed a way to save $100.
What color is JetSpeed?
Visually, the crown of the JetSpeed driver is somewhat reminiscent of the 2007 TaylorMade Burner, and the dark gray/black coloration is certainly a significant departure from the white heads of last year’s RBZ Stage 2 and R1 models.
What does the sole of a Taylormade golf club look like?
The sole of the club—with its flowing triangular design—is reminiscent of something aeronautical, and it looks sleek and fast. The club face itself is shallower than TaylorMade’s recent offerings in order to lower the club’s CG. That makes the club look and feel fast, although perhaps I’ve been conditioned to think this way by TaylorMade’s relentless marketing efforts. One of the coolest angles to view the JetSpeed driver from is from the side; the club looks like it’s moving through a wind tunnel.
How fast is a 9.5 degree jet speed driver?
In testing the 9.5 degree Jet Speed driver, with an average club head speed of 107 mph, ball speed was 155 mph. Average spin was 2600 rpm, with a launch angle of 13.6 degrees for an average carry distance of 265 yards, which are slightly better numbers for me than with last year’s R1 and RBZ Stage 2.
Which is better, JPX 850 or JPX 900?
nmorton : The JPX-900 is definitely more forgiving compared to the JPX-850, and sounds much better. Though they did sacrifice a bit by going with a little larger profile, but it’s easy to get used to. The graphics are so so, but this driver performs. I’m really digging the Evo II (shaft).
Does Ping sell G400?
Note: Ping also sells a G400 SFT (Straight Flight Technology) driver, which has added draw bias. To learn more about it, click through to tech story on the G400, G400 LST and G400 SFT drivers.
Is JetSpeed a good driver?
Bottom Line: If you’re in the market for a forgiving driver this year, JetSpeed is a good place to start. It offers the spin and forgiveness many golfers need to hit consistently long drives.
What is a Taylormade JetSpeed Rescue?
The TaylorMade JetSpeed Rescue hybrids are built to do just what the name implies: rescue you from nearly any position on the golf course and allow you to get back in play or near the hole. The clubhead’s low profile and low center of gravity make it easier to get under the ball’s equator and launch it into the air, resulting in more distance and a softer landing in the target area. Mid- to high-handicappers can replace their long irons in favor of the accuracy and consistent distance the JetSpeed hybrids bring to the table, whether they’re hit from the rough, fairway, or the tee. Speed Pocket The cut-through Speed Pocket in the sole has been rounded and made more efficient, translating into faster ball speed and more distance. Low and Forward CG Placing the CG close to the face and sole results in faster ball speed and lower spin, which will produce an ideal launch for a hybrid. Low Profile Clubhead The shallow face positions mass where players need it, behind the lower part of the face where most hybrid shots are hit. JetSteel Face The shallow face positions mass where players need it, behind the lower part of the face where most hybrid shots are hit. Fitting Message Replace those difficult to hit long irons with TaylorMade hybrids. Our expert staff at 2nd Swing can help you reclaim your long game by custom fitting hybrids to match your swing and your game. To start, they will gather data on your swing and identify any distance gaps in your set using top-of-the-line Foresight technology. Based on that information, they will help you select the right TaylorMade hybrid options and make adjustments to lie angle, loft and shaft length to ensure you’re getting the most out of your new hybrids.
How many clubs are needed for a Pitching Wedge?
Iron sets must contain a minimum of five (5) consecutive clubs with matching shafts, including a Pitching Wedge. If a PW is not included, you will be required to enter each of the irons individually.
How much more when you trade in towards a second swing card?
Receive 25% more when you trade in towards a 2nd Swing eGift Card!
How much more credit do you get from 2ndswing?
In fact, you'll get 25% more from your clubs in 2ndSwing.com credit compared to when you sell them outright. Simply select the "eGift Card" option during the trade-in process and your eGift Card code will be emailed to you after your trade-in has been fully received & processed. The eGift Card can be applied towards the future purchase of any new & used item from 2ndSwing.com.
How many rounds has a golf club been played?
Golf club has been played less than 10 rounds and is in top of the line used condition.
How to contact 2ndswing?
Please contact our Service & Support team at 612-216-4152 or [email protected]. Please have your Order Number ready and reference the tracking number on your shipment to ensure it has been delivered to our facility.
Can you trade in golf clubs?
Absolutely! There is no limit on the amount of golf clubs that you can trade in. You can even find values & trade in your used rangefinder or GPS unit!
What is the sole of a Jetspeed golf club?
The sole of the club features the same branding as the other JetSpeed woods, with the “aircraft in a wind tunnel” sort of metallic bottom, as well as a fixed weight and the polymer-filled slot. At address, the club sits square. Even though the profile is somewhat smaller than the SLDR, the clubhead doesn’t inspire any loss of confidence. As with the the other woods in the JetSpeed line, the Rescue features a grey-black crown with subtle (by today’s standards) crown graphics, which theoretically aid aiming.
How much does a JetSpeed hybrid weigh?
The L Flex is the lightest at 45 grams, while the M Flex weighs 55 grams, the R flex weighs 65 grams and the S flex weighs 75 grams. They sell for $199.
What is Taylormade JetSpeed Rescue?
The TaylorMade JetSpeed Rescue is a hybrid club that features the same polymer-filled cavity as the other JetSpeed woods. According to the company, the new Speed Pocket saves weight from the design and allows the shallower clubface to flex more than it did in previous slotted models, the RBZ and RBZ Stage 2.
How many lofts are there in a G30 hybrid?
We wish the G30 hybrids were adjustable, but they are offered in five lofts: 17, 19, 22, 26 and 30 degrees. The higher-lofted models, because of the G30’s higher-spinning nature, are great for golfers looking for more stopping power on the greens, while the 17-degree model will be enjoyed by better players seeking a replacement for a pesky driving iron or a troublesome 4 or 5 wood.
Why do golfers use hybrid clubs?
Generally, golfers who opt for a hybrid do so for one of two reasons. They either want a club that performs a lot like a long iron, but is more forgiving… or they want a club that launches high like a fairway wood, but offers more control. Either way, the XR series has you covered. In both on-course and launch monitor testing, both hybrids launched higher than previous models. So if you prefer to see a flatter ball flight, going down in loft or pairing the head with a lower-trajectory shaft will help.
How far does a 19 degree hybrid golf cart go?
Across 10 shots on the the launch monitor, the 19-degree hybrid carried an average distance of 217 yards with an average total distance of 231 yards. Roll out would likely be less on typical fairways and greens, of course, with the amount of spin generated. Accuracy was respectable, save for a left bias, which likely was a product of the shaft.
Is it better to hit a golf club lower in the face or lower in the fairway?
The touted benefit of performance on shots struck lower in the club face was apparent on shots from both the fairway and rough. Simply put, shots that felt incredibly thin had nearly the same distance and trajectory as those that were flushed. While great performance lower in the club face is a feature of the whole JetSpeed line, it is perhaps most beneficial to the average golfer in the Rescue, as the club is played from the widest variety of lies, and the ball is likely struck off-center more often.
How often do you swap out a golf club head?
The same shaft was used for both heads, swapping the heads out every three shots.
How fast is a shaved face driver?
The data suggest that the shaved face driver does exactly what it is intended to do: Shaving the face of a driver produces ball speeds on average of 4 mph faster than a stock head. Higher ball speeds equal longer distances; the shaved Jetspeed traveled a full 10 yards farther than its USGA-conforming counterpart.
What is the effect of CNC milling on a driver?
World’s Hottest Drivers has developed a process to CNC-mill (or shave) the face of a driver, increasing the Coefficient of Restitution (COR), or “spring-like ” effect of the face. The result is increased ball speed, decreased spin and of course, longer drives.
Does shaved face increase speed?
While not readily apparent in the data, we found club head speed increased with the shaved face. This may be attributable to a weight difference of nearly 20-grams.
Does MyGolfSpy accept advertising dollars?
MyGolfSpy accepts $0 advertising dollars from any of the major golf manufacturers. We believe in always putting #ConsumerFirst.
Does MyGolfSpy use non-conforming equipment?
At the Risk of Stating the Obvious: MyGolfSpy does not condone the use of non-conforming equipment for handicapping purposes and USGA tournament play, however; golf is a game, and if you just want to have a little fun on a Saturday afternoon, go for it.
