What types of shafts are used in golf clubs?
These types of shafts are most frequently used in irons. Rifle steel shafts are manufactured using a similar process to stepped shafts but without the reduction in diameter and any steps. This allows for a smooth look and the electronic calibration of flex throughout a set of clubs.
Are shafts one of the most misunderstood product categories in golf?
One of the most misunderstood product categories in the golf industry is shafts. There are plenty of myths and mistruths out there that we wanted to clear up for you in this article and share what we have learned at Pete’s Golf over the past several decades.
What are graphite golf shafts and should you buy them?
And because graphite shafts are lightweight, they promote high speeds, which is why they’re recommended for golfers with slower swing speeds. Unlike steel shafts that can weigh anywhere from 100 to 300 grams, graphite shaft weights start from just 50 up to 80 grams.
What are the best golf shafts for ball flight?
Tensei CK Pro White shaft is a low-launching and mid-to-low spinning shaft with a stiff tip section. It’s designed to produce a more penetrating ball flight than the Blue version listed above. 8. Aldila RIPX Aldila is a universally recognized brand used by golfers around the world.
Are rifle golf shafts good?
Flexes in Rifle shafts can also be more exactly tailored for the average golfer as they use decimals to meaure stiffness (eg 5.0, 5.5, 6.0, etc). The stepless design technology eliminates the energy-robbing steps' found on most other steel shafts, which Rifle manufacturers claim provides greater accuracy.
Does True Temper make Rifle shafts?
Rifle Steel Iron Shafts | True Temper Sports.
Where are True Temper shafts manufactured?
Amory, MississippiTrue Temper's corporate headquarters is located in Memphis, Tennessee, USA. Every steel shaft bearing the True Temper name is produced in their steel manufacturing facility in Amory, Mississippi, USA. This 325,000 square foot facility was opened in 1965.
Are Apollo golf shafts any good?
It is the lightest, most affordable steel wood shaft on the market and a great choice for consumers looking for a lightweight alternative to graphite in their fairway woods.
Who owns True Temper Sports?
Jeremy ErspamerPresident/CEO, True Temper Sports Inc.
Is there a golf shaft shortage?
Pandemic golf shaft shortages are becoming the new normal. Well, at least for the next several months. With raw material shortages, manufacturing and transportation shutdowns due to COVID, and loss of some key workers, some shafts are back ordered until January, 2022! And, it is not just limited to shafts.
Is True Temper Made in USA?
More than 200 years of American Manufacturing History We became American Fork & Hoe and later True Temper, a leading global supplier of lawn and garden tools and wheelbarrows. Through it all, we continued to forge, mill and manufacture our tools here in the United States.
Are True Temper shafts good?
Overall: We think this shaft will be a great alternative to heavy graphite shafts as the shaft launches higher than most in this weight category and has great feel. For those players that struggle getting the ball in the air with today's low lofted irons or hybrids, this will be a good option!
What is the biggest misconception about golf shafts?
One of the biggest misconceptions about shafts is that there are standards out there that manufacturers adhere to. Most golfers assume that a shaft marked regular or stiff will be the same across the board, no matter who they buy it from.
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
What is the difference between stock shafts and aftermarket shafts?
The difference between stock shafts and aftermarket shafts is usually found in quality control. Many times the bigger OEMs will strip off the paint of last year’s model and give them a new exterior. The graphics look attractive, but you really have no idea what is beneath it.
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
What is the most important thing about a driver shaft?
One of the most important things about shafts is how they handle the force that a player’s swing will apply. Generally speaking, there are two extremes. Some players apply a late load to their swing, which would require a stiffer tip of the driver shaft. Conversely, a player that extends early in their swing (most recreational golfers) ...
Is the shaft of a truck the same as the transmission?
It absolutely has an effect on how well you can play. The shaft is similar to the transmission of a car. While it’s not the engine, it’s still extremely important. If you are driving a truck you want a transmission that can handle its particular demands.
Smilesy
I just wondering what the main differences are between the Dynamic Gold S300 and the rifle 6.0 shafts are. I'm looking for a new set of irons soon and am not sure what shafts to get in them. Cheers
Burg
I would suggest testing each one. I have Rifle 6.0 shafts in my irons and absolutely love them. I think that both shafts are great so it will likely come down to personal preference.
scotton
I've played with both and I would say the main difference is kick point. The Rifles have a higher kick point and to me they feel a little stiffer. I don't care for Rifles in woods or hybrids, and usually go with S300s. I also prefer S300 for wedges but I think it's because I'm not inclined to learn a new flex profile after years of using the S300.
tdinneen
OK, I pilfered this from somewhere, can't remember where, so apologies for not referencing it. But it's a good discussion and just what you are looking for.... "Dynamic Gold is a very tip and mid stiff shaft that is soft in the butt section. It is a constant weight shaft, but it is worth looking into frequency fitting for optimal results.
Smilesy
Thanks very much for all that. Sounds to me that the Dynamic Gold shaft would be a better fit for me. Cheers
MrSandman
Just found this thread. Great discussion. What is the difference in the Dynamic Gold shafts? SL is superlite? Sonsicore has some sort of vibration buffer?
karl Cummins
Just invested in a set of the new titleist AP2 710 with the dynamic golf s300 shafts and i can't fault them truely magnificent shafts played with project x previously and found them extremely difficult to shape so for lower handicappers who like to shape the ball s300 is the way to go.
MAX OUT YOUR GAME
Specifically designed for a wide range of players, the MAX Graphite Iron is a high launch/spin shaft aimed to maximize your performance on every shot, in a lighter weight package.
PERFORMANCE & STYLE
KBS CustomPlus+ puts you in the designer seat with a variety of custom options for designing your own KBS golf shaft.
INTRODUCING THE KBS GOLFX RETROBUILD
Looking for a professional club builder to install your new shafts? KBS will retrobuild your clubs for you. Select the “KBS GolfX Retrobuild Carlsbad” shipping option at check-out.
What is the right shaft for golf clubs?
The right shaft is exactly the one that fits your swing speed and tempo, irrespective of which shaft is used by your favorite professional or your golf buddies. Fortunately, the shaft should last for the lifetime of the club unless you get frustrated and break the shaft. However, this makes fitting the right shaft crucial.
What material is used in iron shafts?
Steel is the most frequently used material in iron shafts. The progress in quality and strength of graphite shafts are making major inroads to the stronghold that steel shafts have had in the market.
What is a Fujikura shaft?
Fujikura is a celebrated company that has built a standing for delivering quality shaft for all types of drivers. It’s one of the best graphite shafts on the market today. The Fujikura Vista Pro 60 shaft is specifically to upgrade your TaylorMade driver that has lost its snap.
How much does a graphite driver shaft weigh?
Graphite driver shafts between 0.12 to 0.13 pounds for men and 0.09 to 0.11 pounds for women.
What is shaft flex?
Shaft flex is more than a letter on the shaft that provides you with an opportunity to compete with your playing partners. Flex is the EI profile of the shaft that defines the stiffness of a shaft from the tip stiffness through the butt stiffness measured at different points in the shaft.
What is the difference between a lighter shaft and a heavier shaft?
In contrast, lighter shafts offer more speed and distance and a high launch angle.
What are the factors to consider when selecting the most suitable shaft for your driver?
Shafts are manufactured from a variety of materials, weights, flex, length, torque, and kick-points. To get the combination correct, you have to understand the function of each component.
What is a custom golf club shaft?
These custom golf club shafts are aimed at the middle to the top end of the golfing market and feature a full range of highly advanced shafts for golf woods, irons, drivers and hybrid club types. Golfers often use premium golf shafts such as Project X to replace the standard OEM shafts that are fitted as standard in most golf club sets.
Where are Project X shafts made?
They build Project X shafts in their massive facility, which is over three hundred thousand square feet, situated in Armory, Monroe County, Mississippi. The corporate headquarters of parent company True Sports is in Memphis, Tennessee.
Where is True Sports located?
The corporate headquarters of parent company True Sports is in Memphis, Tennessee. Apart from golfing products True Sports also specializes in hockey, baseball and Lacrosse sporting equipment.
Who uses Project X shafts?
According to GolfMagic there are several current PGA Pros using Project X shafts. These include Tommy Fleetwood, Jon Rahm and Rory Mcilroy. With prices to suit almost every budget you can try these shafts out yourself or even have a fitter give you expert advice at your local golf club.
Is True Temper a true sports company?
True Temper is the company responsible for manufacturing the famous Project X brand and is a subdivision of parent company, True Sports. Catering for woods, irons and hybrid type shafts, Project X is one of the most highly rated shaft product lines available today in the US golfing shaft market. So yes, True Temper is the name behind Project X ...
