To do that, the DIY golfer will have to: Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
Full Answer
What happens when you shorten the shaft on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it.
Can you shorten a golf club without adding weight?
"If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none." Of course, you don't have to trim the shaft to shorten a club for the sake of accuracy—you could just order new shafts in the desired length.
Will a shorter driver shaft make my driver shorter?
A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
How do I cut the shafts on my golf clubs?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line.
How much does it cost to shorten a golf shaft?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
Can you get a golf shaft shortened?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How do you cut a golf shaft length?
0:483:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing we got to do is determine the length of the golf club we're going to we're going to cutMoreFirst thing we got to do is determine the length of the golf club we're going to we're going to cut and how much we need to cut off of it. So we're going to lay the club.
What happens if driver shaft is too long?
“If a driver shaft is too long for the player, they can struggle to find the middle consistently. Off-centre hits not only drastically reduce ball speed and distance, but have a big impact on accuracy.”
Is it OK to shorten a driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How do you shorten a driveshaft?
1:203:21How To Shorten A Driveshaft - Two Minute Tech - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe also mark the two inches we're gonna cut out of. It. After making sure the tube is level andMoreWe also mark the two inches we're gonna cut out of. It. After making sure the tube is level and perpendicular to the saw blade we can go ahead and make our cuts.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
How long should your driver be based on height?
Tony Finau is one of the tallest golfers on the PGA Tour at 6'4″, and his driver's length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length5'0″-5'2″44.5″4'10”-5'0″44″< 4'10”43″7 more rows•May 9, 2021
Can graphite golf shafts be shortened?
Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
Why do I hit my 3 wood farther than my driver?
Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it's a funny thing with the driver and its loft compared to the other clubs in the bag.
How tall should golf clubs be on you?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
What is the best length for a driver shaft?
The best length of driver for amateur golfers is 45.5 inches, whereas most professional players will instead use a 44.4 inch driver. It's essential that your driver shaft is of the right length.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How does shortening a golf shaft affect swing weight?
Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
How many swingweight points do you lose when you remove 1/2 inch?
For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.
Is Accuracy One Cut Away?
The purpose of Golf Myths Unplugged is to challenge the accepted wisdom of golf, but even we have blind spots. One of those was revealed recently when we realized that we had never tested the concept of shorter driver shafts being more accurate.
How We Tested
For this test, we brought together five golfers with a range of swing speeds and handicaps. Each player hit seven drives with each of three driver shaft lengths: 44″, 45″, and 46″. The shaft ( Nippon Regio Formula B) and head were the same in each test, and the swing weight was held constant.
Conclusion
If you’re in search of more consistency from the tee, don’t be so quick to shorten your driver. While it’s entirely possible that a shorter driver will help you hit it straighter, our data shows that a longer driver could also be the solution.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
How to cut yourself with a razor blade?
Put a fresh blade in your razor knife. A sharp blade cuts easier and that protects you from having to push or pull too hard, which could expose you to a higher risk of cutting yourself. A hook blade makes this step easier and safer. Slice through the grip until you have cut it from top to bottom.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
What does it mean to be short?
Being short usually means making the lie flatter with standard length clubs. If you feel you have to make adjustments to get good strikes, have perfect timing, or just feel inconsistent, then getting fitted for shorter shafts may help. On good way to know a club is to long is how you stand.
Does impact location determine playing length?
As already pointed out by others, impact location determines playing length. If you hit the ball well, don't change playing length. If you have issues with the contact, you can start with some adjustments. The advice to grip shorter is your first starting point, if you want to feel it out.
What is a cycle in a shaft?
the 'cycles' is the reference term to shaft bend profile, shaft frequency - so in effect it's what's generally spoken of in terms of shaft 'stiffness' or 'softness'. if you just cut the butt end & didn't add weight to the head then the shaft would play a tad stiffer not by much though - but the whole club would maybes 'feel' light which could ...
Does the grip on a golf swing affect weight?
That's because the grip will be thinner at the point you grip down to and, , more importantly, the excess will be acting as a very slight counterbalance - which will affect the swing weight - while you are doing so.
Does CPM match irons?
CPM does, however, allow a set of shafts (for irons) to be matched, as the profile of the individual shafts is pretty consistent. This is what 'Frequency Matching', as opposed to 'Weight Matching' is all about. Adding weight to the head will indeed make the shaft feel less stiff.
Does taking a butt off the tip affect flex?
Much more (stiffening) effect if you take it off the tip than off the butt! Taking it off the Butt (the normal method and how it would be done if you simply specified a shorter length) has a marginal effect, while taking it off the tip typically alters the flex by half a flex per inch.
Does adding weight to a shaft make it stiffer?
Adding weight to the head will indeed make the shaft feel less stiff. Again, depending on the amount of weight, this might not be noticeable, but for those who are particularly sensitive, the tape can be added near the ferrule and balanced by some under the grip.
Is Accuracy One Cut away?
The Myths
- Myth #1 – Shorter driver shafts are more accurate Myth #2 – Shorter driver shafts produce more consistent distance Myth #3 – Longer driver shafts create more club head speed Myth #4 – Longer driver shafts create more ball speed Myth #5 – Longer driver shafts create longer drives Myth #6 – Only better players can benefit from longer shafts
How We Tested
- For this test, we brought together five golfers with a range of swing speeds and handicaps. Each player hit seven drives with each of three driver shaft lengths: 44″, 45″, and 46″. The shaft (Nippon Regio Formula B) and head were the same in each test, and the swing weight was held constant. Each player tested the shafts in a different, random order. All testing was done at, and with the h…
The Results
- Our testing found no clear link between shaft length and accuracy. If we look at the offline average, we see that three players did their best with the 44″ shaft. However, two of those three were nearly as good with a different length. If we look at Player 3, he was best at 46″ by a whopping 10 yards over 45″ and almost 23 yards better than 44″. We also looked at dispersion, …
Conclusion
- If you’re in search of more consistency from the tee, don’t be so quick to shorten your driver. While it’s entirely possible that a shorter driver will help you hit it straighter, our data shows that a longer driver could also be the solution. Whether you’re searching for distance, accuracy, or a little of both, make an appointment with a trusted club fitterto find the optimal length for your driver.