Well, the theory is that the interlocking and overlapping grips are designed, above all else, to help the hands work together to release the club as you swing. The reverse overlap grip helps prevent the potential rolling of the hands, and keeps the grip more in each palm for increased control.
Full Answer
What is an overlap golf grip?
An overlap golf grip takes the right pinky finger and places it on top of the gap between the index finger and middle finger on the left hand. The overlap grip can sometimes be referred to as the Vardon grip as well.
Why do golf clubs have interlocking and overlapping grips?
Well, the theory is that the interlocking and overlapping grips are designed, above all else, to help the hands work together to release the club as you swing. The reverse overlap grip helps prevent the potential rolling of the hands, and keeps the grip more in each palm for increased control.
What is an interlock grip in golf?
Interlock Grip An interlocking grip is where the pinky of your right-hand fits between the index and middle finger of your left hand. This is typically a grip that is used by players with smaller hands to help them feel as though they have control over the golf club. With an interlocking grip, you will feel as though your hands work well together.
What is the correct grip for putting?
It’s the conventionally standard grip used for putting that is as it sounds: reversing the overlap grip that so many golfers use on their full swing. Rather than your pinky finger resting just on top of your index finger, its your index finger that moves to overlap your pinky and index fingers.
What does overlap golf grip do?
The overlap grip provides golfers with a high level of comfort, which is vitally important to creating a smooth golf swing. Some golfers feel that the 10-finger grip or the interlocking grip creates too much tension in the hands.
Do pros interlock or overlap?
When looking at professional golfers, they tend to do the same. The majority of them use interlock a lot of the time, while others tend to stick with the overlap grip. There is no necessary right answer when looking at which grip style to use, but each of them do come with their own benefits.
What does 2+ layers mean on golf club grip build up?
Adding extra layers of grip tape to the shaft while installing a grip will increase the diameter which the grip will go over. Whether it's one, two, or more extra layers of tape on the shaft when the grip is installed, the rubber grip will stretch over the tape, thus making the grip larger.
Should you use a reverse overlap grip for full golf shots?
The reverse overlap grip helps prevent the potential rolling of the hands, and keeps the grip more in each palm for increased control. It's become the conventional standard, mostly because it's been around for so long, and it's used by pros far and wide, from Tiger to Rory and everyone in between.
Which PGA players use overlap grip?
Some of the pro golfers that have used the overlap grip through the years include Ben Hogan, Phil Mickelson, and Arnold Palmer. It does seem to be the more popular grip on tour, but don't give up on that interlock just yet.
Who uses overlap grip?
Spieth's grip is one of the more interesting ones on tour--a derivative of the standard overlapping grip 98 percent of PGA Tour players use and the interlock used by Jack Nicklaus and Tiger Woods.
How many layers of tape do I need for a midsize grip?
As a general rule, adding 4 extra layers of tape (in addition to the 1 wrap of double-sided tape needed to adhere the grip to the shaft) will take a grip from an Undersize to Standard, Standard to Midsize, and so on. Be aware that building up grips with extra tape will stretch the rubber and make the grip feel firmer!
How many layers of tape do you put on a golf grip?
2) HOW MUCH GRIP TAPE DO I NEED? To install a grip, you need at least 1 wrap of grip tape to match the stated size of the grip. This means there is one layer of tape that goes around (and does not overlap) the grip, regardless of the size of the grip.
How many wraps does it take to make a midsize grip?
A standard grip with 3 wraps of tape is as close to midsize as you get.
What grip does Spieth use?
Featuring a distinct pentagonal profile with a wide, flat front grip shape with five pronounced edges, the Traxion Flatso offers incredible stability, feel and feedback. The Flatso has been the grip of choice for Spieth in all three of his major championship victories.
How does Phil Mickelson grip the club?
Phil Mickelson grip – the claw, that is – finds the right hand grasping the top of the club, his thumb extended down the shaft. With his left hand separated from the right, he cradles the handle lightly between the thumb, index and middle fingers.
What is the most popular golf grip?
Golf Pride Tour Velvet The most popular grip on the PGA Tour also happens to be the most classic design in the industry. The Tour Velvet combines a rubber-blend compound with a computer-designed, non-slip surface pattern that maximizes playability and comfort.
Why do people use overlap grips?
The overlap grip is usually for people with larger hands and those that need to control their grip pressure a bit. It can feel a bit easier to release the golf club when using an overlapping grip. Some people think that they are less likely to have hand irritation or blisters when using the overlap grip as well.
What is the most comfortable grip for putting?
The most comfortable grip for the amateur is the reverse overlap. With the reverse overlap instead of having a finger from the right hand overlapping the left, a finger or a few fingers from the left hand overlap the right. This is a very comfortable putting grip and one that does not take long to learn and establish.
What is the grip on the left hand?
Interlock Grip. An interlocking grip is where the pinky of your right-hand fits between the index and middle finger of your left hand. This is typically a grip that is used by players with smaller hands to help them feel as though they have control over the golf club.
What is the golf grip on the left hand called?
Overlap Grip. An overlap golf grip takes the right pinky finger and places it on top of the gap between the index finger and middle finger on the left hand. The overlap grip can sometimes be referred to as the Vardon grip as well.
How to use a yardstick in golf?
Use A Yardstick. You can use a yardstick in your hands instead of a golf club and start gripping it just as you would a club. Hold the yardstick so that the top and bottom ends sit in your hand, do not lay it flat. Those top and bottom ends are going to represent the top and bottom of your grip.
What does interlocking grip feel like?
With an interlocking grip, you will feel as though your hands work well together. Some of the problems with the interlocking grip include the fact that you can end up gripping the club too tightly. Some feel as though the interlocking grip feels funny and creates friction between the fingers.
Why do kids play golf with ten fingers?
Most of the time, a ten-finger grip is taught to children to help make the game a bit simpler when they first begin. As a child ages, it is best to transition them away from the ten-finger grip if possible.
What happens when you over grip a golf club?
Over gripping ironically also leads to energy loss and reduced clubhead speed. Instead of allowing the motion of your core to drive the swing, strain in the hands and wrist decrease some of that power. Other symptoms could be fades or slices. This happens when the club over rotates, crossing the square plane too soon.
Why is my golf grip so small?
With the focus being on feel, you might find your grip being too small if your hands, wrist, and/or forearms are experiencing tightness through the swing or you notice your fingers digging into your palms. Your hands should be relaxed and holding the club lightly, just enough so that the club doesn't slip away from you.
What does it mean to dial into the right grip size?
Dialing into the right grip size means the energy transfer from your swing to the ball is at its highest efficiency. This means nothing gets wasted. And that's how you can achieve maximum ball speed, and perhaps more importantly, lossless energy transfer. Traditionally, players would use glove size to determine grip size.
How does tackiness affect grip?
Generally the tackier the grip the less force you'll need to hold onto the club. With all things considered, it makes sense that grip feel is much more important that actual grip size.
What is the standard grip size?
Standard is usually defined as the diameter of the grip (at the butt end) being around 1". This isn't a hard and fast rule. But most grip manufacturers generally follow this sizing for Standard grips. All other grip sizes are created relative to Standard. Midsize +1/16" over Standard. Oversize/Jumbo +1/8" over Standard.
How to improve your golf shot?
Changing your shaft or head is a big undertaking, and definitely requires a professional's consult. Changing your grip to the right size and model however is one of the easiest and most effective things you can do to improve your shot. The grip is also the only part of the club that you’re touching.
What factors affect golf shafts?
There are so many factors of the shaft that can help or hurt your shots (flex, shaft weight, frequency, torque, launch, tip stiffness, to name a few). Quick side note - we always recommend working with a professional club fitter when selecting your golf shafts.
Why is it important to hold an installed grip before changing the size of your golf clubs?
Because hands (and fingers) come in different shapes and sizes , it's important to try holding an installed grip before committing to changing the size of your golf grips for your entire set of clubs.
What are golf grips?
Golf grips come in either round, ribbed, or alignment shapes. Round is the most popular shape for most grips, meaning you can orient the grip whichever way you prefer (some players like to have the logo of the grip facing up or down, or may choose a 360/no-logo grip ). Ribbed grips have a small protruding ridge, designed to be oriented along the spine of the shaft. This rib, also called a "reminder", helps players feel where the bottom of the grip is, so they know how to properly place their hands. Recently, a more modern and prominent rib design has been introduced by some manufacturers, calling it an " Alignment " or " Calibrate " rib. These alignment grips feature an unmistakable ridge that runs along the full length of the grip.
What are the different types of golf grips?
Golf Grips come in many different styles but pretty much fall into one of these categories: Velvet, Composite, Wrap, Cord, and Hybrid (Cord + Rubber). The Velvet style grip was made popular by Golf Pride's flagship Tour Velvet line, which feature small repeating patterns of crosses using a rubber material. Velvet grips provides a light texture and traction for control without sacrificing feel. The Composite grip was made popular more recently with styles like the Winn Dri-tac and Golf Pride CP2, which feature a tacky and smooth surface that also provide visually enhancing patters and non-slip gripping. The Wrap style grip is actually a simulated 1-piece style but using a wrap design. The Winn Excel is a popular wrap style grip, as well as the Golf Pride Tour Wrap and Jumbomax Wrap grips. Cord grips have cord fabric interweaved through the surface of the grip. This provides traction and added firmness (feedback). The Hybrid style is a newer more modern style grip that utilizes both cord and rubber. The Golf Pride MCC Plus4 is one of the most notable Hybrid grips, which use a softer rubber for the lower hand and cord (for traction/control) in the upper hand.
What is the diameter of a golf grip?
The majority of golf grips have an inside diameter of 0.600" or 0.580". This is because most golf shafts have an outer diameter of this measurement as well.
What is rib grip?
Ribbed grips have a small protruding ridge, designed to be oriented along the spine of the shaft . This rib, also called a "reminder", helps players feel where the bottom of the grip is, so they know how to properly place their hands. Recently, a more modern and prominent rib design has been introduced by some manufacturers, ...
How big is a standard grip?
Every manufacture has a slightly different definition of diameter sizing, but in general Standard grips are around 1" in diameter . Midsize and Oversize/Jumbo grips can vary quite a bit, but in general will range around +1/8" to +3/8" larger in diameter.
Which grip is better for a player with arthritis?
Firm grips tend to provide more feedback to the hands at impact. Soft grips will absorb some of the impact and provide a more comfortable feel. Players that have arthritis or experience hand pain will play better with softer (and/or larger grips).
Why do you need a double overlap grip?
Pelz says a double overlap grip again addresses the culprit—too much hand pressure and tension while holding the club—and allows you to feel the clubhead doing the work instead. He suggests using a double overlap grip at least for practice to get a feel for the proper swing before returning to your normal grip.
What finger is the tension in golf grip?
Leadbetter says excess tension in a standard grip inhibits a player's ability to cock his wrists at the top of the backswing, with much of that tension coming from the fingers in the middle of the grip--the left forefinger and the right pinkie and ring finger. A double overlap removes a finger from the club, decreasing tension in the middle ...
What does double overlap mean in golf?
A double overlap removes a finger from the club, decreasing tension in the middle of the grip and increasing grip pressure elsewhere. Leadbetter says for some, this will lead to reduced tension in the grip and an improved swing.
How many fingers do you need to hold a golf club?
Watch any kid picking up a golf club, and you're likely to see grip the first grip—the 10-finger grip. It's by far the easiest to understand; hold the club in all 10 fingers as you would a baseball bat. The second is most widely used by the world's professionals: the Vardon or overlapping grip, in which the pinkie finger of the right hand ...
Which finger is used for the Vardon grip?
The second is most widely used by the world's professionals: the Vardon or overlapping grip, in which the pinkie finger of the right hand (for right-handed players) overlaps the index finger of the left.
Which finger is the double overlap?
With a double overlap, the pinkie and ring finger on the right hand overlap the index and middle finger on the left, sliding down one slot from a standard overlapping grip.
Why do golf clubs have overlapping grips?
Well, the theory is that the interlocking and overlapping grips are designed, above all else, to help the hands work together to release the club as you swing. The reverse overlap grip helps prevent the potential rolling of the hands, and keeps the grip more in each palm for increased control.
What finger moves to the top of your index finger when putting?
It’s the conventionally standard grip used for putting that is as it sounds: reversing the overlap grip that so many golfers use on their full swing. Rather than your pinky finger resting just on top of your index finger, its your index finger that moves to overlap your pinky and index fingers.
Why is there variance in putting technique?
There’s lots of variance in putting technique because it’s a deceptively simple art. When it comes to selecting a certain grip, abide by David Orr’s golden rule: The number one thing they need to decide is which grip style makes them feel the most coordinated. Video Player is loading. This is a modal window.
Why do you put more tape on oversized grips?
On the flip side, adding more tape to the grip is going to stretch the walls of the rubber, giving it a firmer feel.
How many wraps of tape does a driver grip have?
For instance, Bubba Watson’s driver grip has 15 wraps of tape under the bottom half and 13 wraps under the top half.
Does adding wraps to a golf club make it heavier?
Adding wraps will make the handle of the club heavier, which will no doubt alter swing weight. So if you’ve always played a heavier swing weight, adding more mass to the handle will completely alter the overall feel. A rule of thumb is more wraps of tape should be used if you prefer a lighter swing weight; fewer wraps should be employed ...
Russ757
i add two layers of build up tape half way up the grip, add another layer of build up the whole length, then one full wrap of double sided. I grip down on all my clubs naturally and hate taper. If its only your wedges, lamkin sells some 3gen wedge grips that have very little taper.
zodiackill
I have Lamkin Crossline Cords and put 2 wraps of tape under my left hand, and 4 wraps under my right. So two wraps on top, four on bottom. It removed the taper nicely, feels way more natural in my hands. I hit all of my clubs much, much more consistently, and they just feel more natural to swing.
MadGolfer76
Lamkin makes a wedge-specific grip that is a little longer and is build up in certain places. You might need to add some lead tape to the iron head to balance off the added grip weight on the butt end, but they feel good.
Russ757
some people use masking tape, I just use the build up tape you can purchase from golfworks.. etc
dmac4g
I use masking tape. I tape 10" of the shaft. 2 wraps of tape for the bottom 4 1/2", followed by one full length wrap. I then cover the whole length with two wraps of double sided tape. Does a good job of taking the taper out of my Lamkins. Ends up being 3 wraps at the top and 5 at the bottom.
golfingchuck
I do one strip all the way down and 2 more wraps on the low hand of the grip.
JCAG
I have and always will maintain that the average golfer cannot feel one wrap of tape and it means nothing to performance.
What is a 1/2 overlay?
What is a 1/2″ Overlay? A 1/2″ overlay literally means that all the drawers and doors of a cabinet run will extend half an inch over the frame. This is a classic styling for cabinetry and leaves about two inches of exposed frame in between cabinet doors. It is important to be clear when referring to the overlay as half inch because this term can ...
Is half overlay interchangeable?
Half-inch overlay and half overlay are not interchangeable terms because the latter is commonly used to describe the middle of a run of cabinets where the doors share a common single partition wall.
Feedback
I'm a 4 to 6 handicap player who has always fought a flip at impact. I've tried everything to quiet the flip to get more consistent, add some distance through some forward shaft lean, and stop relying so much on timing. Drills have helped some over the years but I'm still right side dominant.
Feedback
Azinger (I think it was zinger) showed a drill once hitting driver with the right hand covering completely the left hand for a right handed golfer. Said something like "it is impossible to flip without the right hand" Run with it.
Feedback
I switched to this recently and so far there hasn't been any downside. Allows me to apply force with the right arm in the downswing without the fear of my right hand taking over and shutting the face closed. I'll even go triple overlap if I want to keep my hands particularly quiet. I've picked up a few extra yards with the switch too.
Feedback
Has anybody else experimented with the double overlap like Jim Furyk uses? I don't know how I ended up with this grip, but I got messing with it on the range tonight and found it very comfortable. I seemed to be more aware of what my left hand was doing.
Feedback
My golf mentor was a Life Member of the PGA . He frequently conducted seminars for them. He used this grip and had me switch in 1980. He liked the fact it helped eliminate rt hand cast and fortified the use of the left arm thru impact.. It took about an hour to get used to and never had any negative effects on shotmaking.
Feedback
Like the OP, I also landed on this grip due to a blister at the range. I've stuck with it since and it has improved my iron play.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
