Many golfers have documented that epoxy has caused their shafts to break apart. The likely cause of this is using too much epoxy when gluing the head to the shaft. It seems like epoxy may create a break point where the head and shaft meet.
How does the golf shaft work?
The golf shaft is known as the ENGINE of the golf club. On the downswing, as the hips rotate, the weight transfer takes place and the body uncoils, the shaft of the club bends. This bend is also known as flex, and as this flex straightens out, power is transferred from the shaft to the club head and through to the ball.
Why do you keep breaking golf clubs?
Broken golf clubs occur when golfers slam the club head into the ground out of frustration. Incorrect storage of the club and poor swing technique will also cause shafts and heads to break. Why Do You Keep Breaking Golf Clubs? 1. A Rusted Shaft 2. Fat Shots 3. Epoxy Inside the Shaft 4. Your Using a 3 Wood 5. Using Graphite Shafts 6.
Why do golf clubs have stiff shafts?
The faster you swing the more the shaft will bend, so the more you need to control it. The stiffer shaft allows the shaft to bend correctly and allow the club head to return to a square impact position.
Why do my golf balls slice when I putt?
If you are struggling with a slice you might be playing with a shaft that is too stiff for you. Try a more flexible shaft, when a shaft is too stiff the clubface struggles to turn back to square, which will present the clubface open at impact, causing the ball to slice.
How do you get rid of pitting in golf clubs?
0:122:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along theMoreIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
How do I stop my golf shafts from rusting?
To prevent rust from happening again, you should make sure your golf club shafts always stay dry. People think about cleaning club heads and grips, but they don't pay much attention to the shafts. If water sits on the shaft, it will eventually start to rust it.
What does tipping an iron shaft do?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
Do you lose distance with graphite shafts?
Graphite shafts are lighter than steel shafts, resulting in an increase in swing speed and distance. This is particularly beneficial to players with slow swing tempos.
Will Coke remove rust from golf clubs?
Pour the Coke into the bottom of the bucket on the club heads. When the Coke settles down, you will want it to soak for several hours. Letting the golf clubs soak for at least four hours or so will give the Coke time to work cleaning the rust off the clubs without you having to scrub them.
Does rust affect golf clubs?
Made famous by Cobra's Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
What does soft stepping a shaft do?
Soft stepping would enable the flex of the club shafts to be softer and more flexible. If you soft step a stiff flex shaft it would feel between a regular and stiff flex.
Does cutting down a shaft make it stiffer?
"Cutting more of the grip end will still stiffen the shaft a little bit, but only because in doing so you make the shaft shorter, and not nearly as much as when trimming more from the tip end."
What is Pureing a golf shaft?
Simply put, as Briand explains, puring a shaft helps to identify the inconsistencies of a particular golf shaft as compared to the average or expected design of that shaft. That way, a club builder is armed with certain information to build the club in the most stable and consistent orientation.
Do any pros use graphite shafts?
In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.
Should older golfers use graphite shafts?
Are graphite shafts better for seniors in golf? Yes, graphite shafts are the best choice for most seniors. As I mentioned, the shaft plays a major role in ball striking, consistency, and distance. The overwhelming majority of senior players would benefit from using a graphite shaft.
Does Tiger Woods use graphite shafts?
Woods' Masters career has also seen players go from drivers in the 260 cubic-centimeter range to 460 ccs, and in Woods' case, the move from steel to graphite shafts in metalwoods.
Can you use WD-40 on golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one. Learning how to keep your golf clubs clean is vital.
Does vinegar dissolve rust?
Luckily, acids found in everyday household items, such as vinegar, lemon juice, and potatoes, can remove rust from metal. 1 Add the abrasive action from other ingredients, including borax, baking soda, and salt, and say goodbye to rust without the need for harsh chemicals or fumes.
How do you clean golf shafts?
The best way to clean your golf shafts is quite simple. Get a small towel slightly moist and wipe them down. Use your other towel to dry them off. If you notice some rust or dirt, you can use your golf club cleaner mixture (lukewarm water & liquid detergent) and your brush.
Do steel golf shafts wear out?
Golf tip: A steel shaft probably won't loosen or wear out, but it can get bent. Keep an eye on the steel golf shaft of your most commonly used clubs to ensure everything lines up as it should.
Why do golfers smack their clubs into the ground?
It’s not uncommon to see golfers smacking their club into the ground out of anger . Obviously clubs were not designed to withstand such punishment. If you do find yourself with an anger problem on the golf course, you’ll find yourself visiting the golf store in no time.
Why are counterfeit golf clubs so cheap?
While counterfeit clubs are much cheaper than the real deal, there’s a reason why they’re so cheap. Unknowing golfers may not understand how one steel club is different to the other and choose to save some one on a clone. Counterfeit drivers and woods are particularly prone to a short life expectancy.
Why do golf clubs break?
Golf clubs can break due to user error. Broken golf clubs occur when golfers slam the club head into the ground out of frustration. Incorrect storage of the club and poor swing technique will also cause shafts and heads to break.
How to keep golf clubs from splitting apart?
A wet shaft will eventually turn into a rusty heap of metal, causing your club to crack or split apart. Solution: Store your clubs indoors or outside under shelter. After playing a game of golf in the rain, use a towel to dry off your clubs. When washing your clubs, use as little water as possible.
How long do golf clubs last?
However in a set of golf clubs, the driver and the set of woods are clubs that are more likely to break sooner. Expect a 2 to 5 year lifespan for drivers and woods.
How to make a fat shot in golf?
Reaching for the ball will make fat shots occur more often. Assuming your right handed, don’t stand back on your right side. Amateur golfers tend to naturally stand to the side of their dominant hand.
Why do 3 woods break?
Woods, especially the 3 wood are prone to breaking sooner than other clubs in your set. This is due to ground contact that a 3 wood is likely to endure. General play and “fat shots” cause stress to the shafts kick point.
Lifespan
Unfortunately, golf clubs have a life span just like a car. If a set of clubs is older than 10 years old, expect deterioration like broken shafts, heads coming off and grips unraveling. Although the lifespan can be extended by taking care of the clubs, anything beyond 10 years is likely to give problems.
Manufacturing Defects
Like all commodities, manufacturing process errors or faults do occur occasionally. Depending on the period of time and use, manufacturers are likely to accommodate claims that are within reason. They will request pictures, or inspection by their agent in the area to determine if abuse or mishandling is the cause.
Cheap Copies
The exponential growth of golf as a sport worldwide has brought about clubs being a marketable product. In China, where most of the top brands are manufactured, cheaper copy versions have sprung up, and sell at a fraction of top brand costs.
Playing Golf in the Rain
To the die-hard golfer, a bit of rain on the course is no reason to stop playing. As the saying goes; “it does not rain on the golf course”! Playing in the rain is OK, but the treatment of the clubs after the game is an important factor.
Bad Swing Mechanics
Beginners should always take a few lessons from a seasoned pro to get the basics of the golf swing right. This not only will improve your game at a faster rate but will also protect your clubs. Taking deep divots on every shot on hard turf courses will ultimately weaken the shaft and damage the clubhead.
Storing Clubs in The Car Boot
It is easy to throw the clubs into the car boot after a Saturday outing and leave them there until the following game. The temperatures in the boot will affect the longevity of the clubs. The adhesive used in securing the head to the shaft is high class, but the continuous variation in temperatures in the boot will slowly cause deterioration.
Club Abuse
Golf is a very frustrating game and will always test the player’s patience and skill level. It is one of the toughest games to master, due to the finite margins between success and failure on a shot. How often on the tee do we see an “extended” follow through with the club banged into the ground!
What is the shaft of a golf club?
The golf shaft is known as the ENGINE of the golf club. On the downswing, as the hips rotate, the weight transfer takes place and the body uncoils, the shaft of the club bends. This bend is also known as flex, and as this flex straightens out, power is transferred from the shaft to the club head and through to the ball.
How to tell if your golf club shaft is too stiff?
There are a few telltale signs that might give you an indication that your club shafts are too stiff. If you have a good swing, but your distance is lacking it may be the shaft is too stiff. It may also be that you tend to either slice the ball or fade towards the rough on the right of the fairway, for the same reason.
What to use to reduce fade off tee?
Mix and Match. There is nothing wrong with the idea of mix and match and is becoming more common. Using graphite shafts on your driver, woods and long irons will help reduce the fade off the tee, increase the distance and soften the feel if you are to slightly miss-hit.
What is stiffness in golf?
The stiffness or flex of the shaft is a much-neglected aspect of your golfing equipment as most golfers are more interested in the brand, or technical features, or looks of their clubs. What most golfers fail to appreciate is the effect that ‘swing speed’ has on selecting the correct amount of flex of the shaft.
How fast can a pro swing?
Pros are top athletes and would have a swing speed of 110 mph on average, while amateurs would be swinging between 80 to 95 mph. There are various ways to determine your swing speed, from clip-on devices, iPhone Apps, range monitors, and at the pro shop.
Who is the founder of GolfSpan?
Golf Shafts – The Ultimate Guide – All You Need To Know To Choose The Right Shaft. Nick Lomas. Nick Lomas is the founder of GolfSpan, an avid golfer, not quite a pro but has over 15-years of experience playing and coaching golfers from all over the world.
Is graphite shaft stiff?
On the shorter, irons accuracy and control are more important thus the extra flexibility of the graphite shaft may be a disadvantage. Graphite shafts are also graded Ladies, Senior, Regular, Stiff, and Extra Stiff, but remember the actual flex will vary from one manufacture r to another.
What happens if your golf shaft is too stiff?
When the shaft is too stiff, you won’t be able to get enough spin on the ball, causing it to come out very low, and look like it’s falling out of the sky. If it’s too stiff, your shot shape will be from left ...
Why does my golf ball go high?
When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a ‘ballooning’ effect on the shot and it will tend to go quite high. You might have an inconsistent shot shape if the shaft is too flexible.Having a shaft that is too flexible can also cause the ball to hook uncontrollably, ...
What is shaft flex?
Shaft flex is how much the shaft bends throughout the swing, someone that swings it slow will need a more flexible shaft, while someone that swings it fast will need a stiffer shaft. You get Ladies, Senior, Regular, Stiff and X-Stiff shafts in Woods and Irons, generally your Woods and Irons will be the same flex.
How is shaft flex determined?
Your shaft flex will be determined mainly by your swing speed, and then by your ability, age and personal preference. Within each shaft flex there are different weights and kick points (bend points). Shaft flex is very important as it will help with your distance and accuracy.
Can you change shafts in golf clubs?
Can I Change The Shafts In My Clubs. Absolutely yes. Changing shafts in a driver is a little easier than irons, as nowadays the shafts in Drivers can be screwed out, this makes it easy to chop and change different options. Iron shafts are a little different, firstly you have to buy 7 or 8 depending on your set make up, ...
Is golf hard on its own?
Golf is hard enough on its own, so why should you make it harder by playing the wrong equipment? Playing the right shaft in your clubs can be the difference in you flying that bunker with your drive, or hitting a super tight fairway with ease, it can also be the difference in you hitting more greens with your Irons.
Do golf clubs come cheap?
100% yes, golf clubs don’t come cheap these days. You won’t buy a car without test driving it, and you definitely won’t buy a Ferrari if you need to go off-roading. Buying the wrong equipment can really put you on the back foot. Having the right shafts for your game can give you a real advantage, and make the game much easier.
How does the shaft work in golf?
A golf shaft stores energy when it flexes during the backswing and the start of the downswing. The energy is released at impact when the shaft whips forward. As the Leaderboard website notes, if you put the grip end of a club into a vise, then pull back on the clubhead, you’ll feel tension in the club. This tension is the stored energy, which will spring the club head forward if you release the club. To achieve maximum distance, Leaderboard.com explains, the stored energy must be released at the moment of impact during a golf swing. If the energy isn’t released quickly enough -- in other words, if the shaft is still flexed on impact -- you’ve wasted potential energy. If the shaft straightens prior to impact, the potential energy you have built is gone and, again, you’ll lose distance on your shot.
What is the difference between a higher flex point and a lower flex point?
All else being equal, Thomas explains, a higher flex point produces lower ball flight, while a lower flex point results in a higher launch angle.
How fast should a golfer swing?
Longtime USGA technical director Frank Thomas advises golfers with swing speeds of 80 to 95 mph to start ...
What is flex point in golf?
He notes that a shaft’s flex point, also known as the kick point, is the spot where the shaft will bend the most.
What happens if your golf shaft is flexed?
If the energy isn’t released quickly enough -- in other words, if the shaft is still flexed on impact -- you’ve wasted potential energy. If the shaft straightens prior to impact, the potential energy you have built is gone and, again, you’ll lose distance on your shot.
Is there a flex standard for golf shafts?
Unfortunately, as “Golf Magazine” editor Scott Kramer notes, there is no industry standard regarding flex. In other words, two S shafts manufactured by two different companies may have different amounts of flex.
What Happens If Your Driver Shaft Is Too Stiff?
Playing with the correct shaft in your driver is incredibly important. With the correct shaft flex you will be able to deliver the club at optimum speeds, and produce the correct numbers in terms of launch and spin on the golf ball.
What is Shaft Flex, And Why Is It Important In Drivers
Shaft flex is how much the shaft bends while you swing the club, if you swing it slowly you will need a more flexible shaft, while if you swing it fast you will need a stiffer shaft.
What Are The Signs Your Driver Shaft Is Too Stiff
There are a few tell tale signs that your shafts are too stiff, firstly you will lose the ball to the right, because the shaft is to stiff it will be hard to square up at impact, causing the face to be open when you hit the ball, this is going to produce a fade or slice shot, generally ending up on the right side of the course.
Will You Adapt Your Swing To The Incorrect Shaft Flex
Yes you will, if your shaft is too stiff you will adapt your swing in more ways than one.
How Does Weight, Kick Point And Torque Affect Shaft Flex
90% of the time shaft flex is impacted by weight, the heavier the shaft is the stiffer it is, and the lighter the shaft is the more flexible it is.
How Does Swing Speed Affect What Shaft Flex You Should Use?
Swing speed is the main influencer in what shaft you should use. The faster you swing the more the shaft will bend, so the more you need to control it.
How To Discover Your Swing Speed?
By using a very fancy piece of machinery called a launch monitor, you are able to track how fast your swing speed is. The most popular companies are Trackman, Flightscope and GC Quad.
Feedback
One of my putter shafts has some pitting on it, and I want to get it the heck off! How should I go about doing this???
Feedback
I would just replace it with a new shaft. Most .370 iron shafts will fit a putter, depending on how the hosel is configured. A slight amount of heat until the epoxy loosens and you pull the old shaft and reshaft with a new iron shaft. If you need a special, bent shaft there should be some available through MALTBY or GOLFWORKS. Hope this helps.
Feedback
You might want to understand where the rust is starting from - from the outside or the inside.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
How to remove rust from golf club shaft?
Step 1. Dampen a rag and rub the club shaft anywhere that rust has formed. The rag will remove loose, flaked rust to help you see how much rust is sticking to the shaft.
What does it mean when a golf club shaft rusts?
When a golf club's iron shaft develops rust, this issue doesn't mean the club is no longer worth keeping. It does mean, however, that the problem requires your immediate attention. Because rust spreads over time, address the situation quickly to restore the club to its original appearance. If your clubs are rusting frequently, examine how you use ...
Who is William McCoy?
Toronto-based journalist William McCoy has been writing since 1997, specializing in topics such as sports, nutrition and health. He serves as the Studio's sports and recreation section expert. McCoy is a journalism graduate of Ryerson University.
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.