Full Answer
Why is my club car golf cart brake light not working?
The frequently reported reasons for the brake light not working in a Club Car golf cart is either a faulty brake light switch or loose wiring. You have to check these two first before moving on to anything else. The brake light switch is mounted below the Club Car’s pedal. You will have to remove the floor mat to access it.
Is there a brake light switch for a golf cart?
This Golf Cart Brake Light Switch is designed for installation on ALL GOLF CARTS, INCLUDING CLUB CAR, EZ-GO & YAMAHA GOLF CARTS. It's very easy for regular folks to install to the existing brake pad to turn your rear lights into brake lights.
Why do my brake lights keep coming on?
Let’s begin with the causes: The most common cause your brake lights stay on is because of a faulty brake light switch or sensor. It can also be caused by a faulty brake pedal or a malfunction in the electrical system. If you recently replaced the rear light bulbs when it occurred, you may have installed the wrong light bulbs.
Where do the brake light wires go on a club car?
The Club Car brake light wiring diagram is in three parts, 2.1, 2.2, and 2.3. The schematic shows you the view from the side where you can see the brake pedal and the brake pad. A bracket is screwed to the rear of the brake pedal pad from where two wires will go. One of these wires will go to the NC switch and the other to the COM.
What would cause brake lights to stay on all the time?
The most common cause your brake lights stay on is because of a faulty brake light switch or sensor. It can also be caused by a faulty brake pedal or a malfunction in the electrical system. If you recently replaced the rear light bulbs when it occurred, you may have installed the wrong light bulbs.
Why won't my brake lights turn off?
A common cause for car brake lights that won't turn on is a faulty brake light switch. This component can be found beneath your dash attached near the brake pedal. If your lights are disabled, it may be sticking closed or the part has failed.
How do you reset a brake light switch?
2:213:49Brake pedal position (stop light) switch/sensor remove, reinstall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you install that you have to reset it by pulling the arm all the way out like this then whatMoreSo when you install that you have to reset it by pulling the arm all the way out like this then what you do is push the brake pedal down as if breaking.
Why is my brake light still on after changing my brakes?
That light means your parking brake is on. If your parking brake is off, and the light stays on, it means you brake fluid is low. If your fluid is full and the light is still on... there may be a problem with the hydrulic system or booster.
Where is the brake light switch located?
In most cars, the brake light switch is installed right above the brake pedal. Inside, it has a one- or two-way electric switch.
How do you know if your brake light switch is bad?
How do you know if your brake light switch is bad? Here are a few indicators of a bad switch:The brake lights don't work. ... Brake lights don't go off. ... Cruise control stops working. ... Your car won't turn on. ... ABS (Anti-lock brake system) warning light comes on.
Where is the fuse for brake lights?
Like all fuses, the brake light system fuse can be found in the power distribution center, which is under the dashboard or tucked away underneath the hood.
How do you fix a brake pedal switch?
6:287:46Brake Light Switch Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe nut. So that the light when the pedal is up is going to make sure that brake light is off andMoreThe nut. So that the light when the pedal is up is going to make sure that brake light is off and just as it goes down it will turn the brake light on.
How do you bypass a brake pedal switch?
0:082:32TIPS FOR T-MAN, HOW TO BYPASS A BRAKE SENSER SWITCHYouTubeStart of suggested clipEnd of suggested clipAnd you'll see some plugins somehow another take a wire to attach that one to that one is all youMoreAnd you'll see some plugins somehow another take a wire to attach that one to that one is all you got to do is make a loop coming right out of this one right back into that one.
Why is my red brake light on?
A red light that flashes on and off could signal low/almost empty brake fluid, but also a serious issue with the brake's hydraulic system. If the light comes on and stays on, you could end up with a potentially catastrophic (and costly) brake failure.
Why won't my brake lights go off?
Faulty Brake Light Switch or Sensor. This is the most obvious reason your brake lights won’t go off. When the switch inside the brake system isn’t working right, your lights can’t turn off. The switches and sensors in a braking system are responsible for telling the lights when the pedal is up or down. If either of these is defective, the lights ...
Why do car brakes work?
Your car brakes are meant to keep you from getting into an accident and the lights warn others that your vehicle is slowing down. When anything in this system malfunctions, it could spell disaster.
What to do if brake light is defective?
If this brake component is defective, you want to replace it, which should cause your brake lights to work normally again. You can also try to adjust the brake pedal switch if it has an adjustment and if it looks like it is engaged, even if the brake pedal is released.
What happens if you can't get the brake pedal to come back up from the floor?
If you can’t get the brake pedal to come back up from the floor, the lights are not going to go off. The pedal must come back to its original position for the switch to close and the lights to cease working.
What is the purpose of the switches and sensors in a brake system?
The switches and sensors in a braking system are responsible for telling the lights when the pedal is up or down. If either of these is defective, the lights are receiving the wrong message.
What is a quick check on brake lights?
Perform a quick check of the brake lights, pedal and lines in between to ensure nothing has been affected by corrosion, leaves, dirt or other contaminants.
How to check if a light bulb is the wrong type?
Check the socket if you can see two circuits or one, and then check the light bulb. Replace the bulb if it’s the wrong type.
Why are my lights blown out?
If the voltage reducer was hooked up improperly, the lights may have been blown out due to over-voltage. What you will need to do is check what voltage your cart is running at. Because all electrical accessories run on 12V, and the reducer's job is to take higher voltages down to 12V.
When installing electrical accessories, should a golf cart be in the TOW position?
Your golf cart should always be in the TOW position when installing electrical accessories such as lights.
How many volts does a golf cart take?
Even the most basic voltage reducer will do the job, taking 16,18, 36 or 48 volts down to 12. Check out Golf Cart Voltage Reducers for more information.
What to do before taking a golf cart out on the street?
The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality.
Do you have to engage the parking brake on a gas golf cart?
Yes. If you have a gas golf cart, you will need to engage the parking brake prior to installation. This ensures that your golf cart stays put while you’re working on it. I’ve hooked up the light kit and voltage reducer, but some of the lights are not coming on or came on for a minute and went off.
Is it legal to drive a golf cart on the street?
In short, the laws on this topic vary not only from state to state, but also by municipality/city. The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality.
Can you replace factory lights with a light kit?
Our light kits are made to replace any previously installed factory light kit that you would have on your cart. With that said, because they are made to replace the factory lights, they should slide into the existing cut-outs that you have, with no additional cutting. If you’re unsure and would like to double check, we are always happy to send the cut-out templates so you can match up the dimensions prior to ordering. Many of these are included on the specific product pages.
What is a golf cart brake light switch?
This Golf Cart Brake Light Switch is designed for installation on ALL GOLF CARTS, INCLUDING CLUB CAR, EZ-GO & YAMAHA GOLF CARTS. It's very easy for regular folks to install to the existing brake pad to turn your rear lights into brake lights. It's made to plug & play with Red Hawk wiring, or can be used with the optional brake harness with other brands.
How to contact GolfCartGarage?
If you have any other questions, feel free to give us a call at 1-800-401-2934 or send us an email at [email protected].
Why Won’t My Golf Cart Lights Work?
There are different types of lights on your golf cart. The reason why one light doesn’t work may not be the same reason for another faulty light . However, in general terms, a few reasons why golf cart lights tend to fail are given below:
What is the warning light on a golf cart?
The warning light on an electric golf cart is the battery light . True to its name, this light gets illuminated to warn you of a low battery or low batteries. It serves as a signal for you that it’s time for battery recharge.
What happens if your golf cart battery is low?
Weak Battery Voltage. One or more of your golf cart batteries are likely to have a low voltage. This can stop the batteries from being able to pick up charge. Check the voltage of each battery separately. When you find a battery with a low charge, try charging it to its full voltage using a smaller auto charger.
What is a golf cart battery light?
A golf cart’s battery light is undoubtedly an indispensable accessory of any battery-operated golf cart. This light notifies you when your golf cart battery or batteries are low on charge. It saves you the hassle of worrying whether you would be stranded because of a drained battery.
Why does my golf cart light flash red?
The light, usually red, starts flashing when the battery has got less than 10 percent charge left, in an electric golf cart or less than 10 percent fuel in a gasoline-powered golf cart. The golf cart has several other warning lights. For example, there is a warning light to indicate if there is any problem with the engine of your cart.
Why is my battery light flashing?
One reason why your battery light is flashing could be because the batteries are not getting a full charge from the charger. The flashing indicates that the charging is less than 90 percent.
What happens if battery pack voltage is low?
If the battery pack voltage is very low, the OBC will not be able to activate the charger.
Why are my golf cart lights faulty?
Your golf cart’s lights may prove faulty for a variety of other reasons. Common issues with a golf cart’s lighting system can range from a blown-out fuse to a faulty lighting switch. In general, most golf carts are equipped with headlights but no tail lights. If your vehicle is equipped with tail lights it is likely you added these yourself or had them added custom by a mechanic. Therefore, troubleshooting problems with your vehicle’s headlamps will be a different process than troubleshooting your vehicle’s taillights. Each of these troubleshooting processes will be outlined below, but first, you should become familiar with the different parts of your vehicle’s lighting system.
Why aren't my golf cart lights working?
The main reasons golf cart head lights don’t work are blown out bulbs, dead battery’s, faulty wiring, bad headlight switch, bad voltage reducer or a blown fuse. These are all easy to troubleshoot, and very easy to fix. Your golf cart’s lights may prove faulty for a variety of other reasons.
Why do my golf cart headlights stop working?
The third reason for a golf cart’s headlights to stop working is a faulty headlight switch. Sometimes this switch will not receive enough current causing the switch to fail. When this switch fails there is no way for the golf cart operator to activate the vehicle’s headlights.
How many terminals do you need to connect your golf cart headlights to?
These wiring for a cart’s headlights should only be connected to two battery terminals; any additional connections will cause the headlights to blow immediately. In order to check your golf cart’s circuit wiring you should refer to the wiring diagram included in your golf cart’s user manual.
What is the lighting system on a golf cart?
Your golf cart’s lighting system is composed of various parts. Each of these parts works together to produce a working electrical circuit that provides a current to your vehicle’s headlights and brake lights (if your vehicle is equipped with them). The most obvious parts of your vehicle’s lighting system are the headlight and brake light bulbs. These parts of the system are responsible for producing light. In addition to the actual bulbs, the lighting system is also composed of fuses and the lighting switch.
What is the difference between headlights and brake lights?
The actual part that produces light for the vehicle. Similar to car or truck lighting, headlights on a golf cart produce yellow or white light, where as brake lights are colored red. Electrical Circuit. The system of wires, fuses, and resistors that produces a stable electrical system.
What are the parts of a vehicle's lighting system?
The most obvious parts of your vehicle’s lighting system are the headlight and brake light bulbs. These parts of the system are responsible for producing light. In addition to the actual bulbs, the lighting system is also composed of fuses and the lighting switch.