While having a longer shaft is going to allow you to generate more leverage, a shorter shaft is going to allow you to have more control over the ball and reduce the number of missed fairways off the tee. Then there is the question of shaft length for the rest of your clubs which is a little bit more complex.
Full Answer
Why are there two diameters for golf club shafts?
Golf club shafts currently come in two diameters: 0.355 and 0.370. Why? There is no longer any logical reason for this and it simply makes life unnecessarily more complicated for the golf industry and consumers. Please golf industry, pick one diameter and internationally standardize on it. This is ridiculous. More sharing options...
How does shaft stiffness affect your golf clubs?
When the length of your golf club is adjusted to better suit your arm length and height, its shaft stiffness is bound to get affected as well. More specifically, when the current shaft length is shortened, the level of ‘stiffness’ of this shaft increases.
What happens if your golf clubs are too big?
Instead of engaging the smaller muscles, a bigger diameter grip restricts and slows the hands down — often causing you to lose both swing speed and the ability to square the clubface fast enough through impact. Meaning, you’re prone to slice it a whole lot more if your handles are too big.
Are Your Golf Grips too big or too small?
The opposite might be true with grips that are too big. Instead of engaging the smaller muscles, a bigger diameter grip restricts and slows the hands down — often causing you to lose both swing speed and the ability to square the clubface fast enough through impact. Meaning, you’re prone to slice it a whole lot more if your handles are too big.
Are all golf club shafts the same diameter?
The shaft tip size is the the diameter of the tip portion of the shaft. For irons, this will usually be 0.370" (parallel) or 0.355" (tapered). For woods, it will be either 0.335" or 0.350". To choose the tip size needed, you'll want to match it with the ID (inside diameter) of the hosel of the golf club head.
Can golf clubs resize?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
Do pro golfers use shorter shafts?
Most pro golfers use shorter shafts on their drivers than recreational golfers. Is this true? Absolutely true.
Will a shorter shaft help my slice?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
How much does tipping a shaft effect Flex?
Tipping any TPT Red Range shaft 1 inch will result in a stiffness increase of 5 cycles per minute (cpm), or one-half flex. This removes the need for half flexes in the Red Range. When a 14 Lo is tipped 1 inch, for example, it effectively becomes a 13.5 Lo.
How much does it cost to Reshaft a club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
Why do I hit my 3 wood farther than my driver?
Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it's a funny thing with the driver and its loft compared to the other clubs in the bag.
What shafts does Tiger Woods use?
Tiger has a Mitsubishi Diamana D+ 60 TX shaft fitted to his driver.
What happens if I shorten my driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How much further does 48 inch driver go?
See more on his winning driver here.... The maximum USGA driver length is 48 inches, the same as the limit on the Long Drivers of America tour. Each added inch can add 1-2 mph to your swing speed. So, potentially, you could add 6 mph which can translate to 15 - 20 yards going from a 45 inch driver to a 48 inch driver.
How long should a golf driver be for my height?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows
What is average golf drive distance?
219 yardsThe average driving distance across all ages of golfers is 219 yards. Golfers under the age of 30 typically hit the ball the longest (238 yards) and distance declines by around 10 yards every ten years. Swing speeds normally decrease as you age and that's where the decrease in yardage comes from.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What happens if you swing too heavy?
If the overall club is too heavy, you can lose swing speed which can result in a loss of yardage. Too light of a club will be hard to guide and control which can lead to mishits. Players with faster swing speeds or more accelerated tempos can benefit from heavier shafts.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
What diameter is a golf club shaft?
Golf club shafts currently come in two diameters: 0.355 and 0.370. Why? There is no longer any logical reason for this and it simply makes life unnecessarily more complicated for the golf industry and consumers. Please golf industry, pick one diameter and internationally standardize on it. This is ridiculous.
Why do clubheads have tapered shafts?
The reason was because all the way up through the 1960s the adhesives used to secure shafts in clubheads were pretty poor in terms of shear strength . A tapered construction allowed the shaft to be "swaged" into the hosel to create a bit of a mechanical lock to help secure the shaft in the head .
What is single shaft design?
1) single length design - one single shaft is made that can be used for all irons - by varying the different tip trim amounts. 2) discrete length designs - an actual separate design for each iron. The first is cheep and inexpensive to design and produce so certainly has it's place in the industry on that basis alone.
Why is lower torque costing more?
Of the two, lower torque cost more because of the added labor and time required to cut and wrap the smaller layers with fibers at an angle to the axis of the shaft. As a way to save money and get lower torque through common production steps, some of the OEMs chose to just increase the tip diameter.
Is a taper tip iron shaft constant weight?
Interesting thing is that not all taper tip iron shafts today are constant weight. Many start life as a parallel tip unitized shaft, successively tip trimmed at the factory after which the parallel tip is put into a special swaging die to squeeze the tip end down to a 0.355" tapered form.
Why is a shorter shaft better for golf?
Conversely, a golfer with an extremely fast swing speed may find he is able to better control his driver when it is fitted with a shaft that is shorter than usual. A shorter shaft would position him closer to the ball for more control, at the cost of slightly less leverage and ultimately less distance.
Where is the shaft on a golf club?
The shaft is the part of the club that connects to the clubhead. It is located in the middle of the club, between the grip and the head. The grip covers the top part of the shaft whereas the bottom end is inserted into the clubhead through the hosel.
What is the function of a golf shaft?
Function of the Shaft. Acting as a lever, the shaft is what allows a golfer to hit the ball over great distance simply by using the rotation of his body (hips, shoulders and arms). The distance between the golfer and the ball – through the shaft – is what allows for the multiplication of the force onto the golf ball.
What does tapered shaft mean in golf?
This means that they are wider at the top near the grip and progressively become smaller in diameter as they approach the clubhead.
Does the shaft length of a golf club decrease as the loft increases?
For the clubs situated in the middle of those, generally, the shaft length will decrease as the loft will increase. So for example, a 5-iron will be a bit longer than a 6-iron, which will be longer than a 7-iron, and so on.
Why are my golf grips so big?
Instead of engaging the smaller muscles, a bigger diameter grip restricts and slows the hands down — often causing you to lose both swing speed and the ability to square the clubface fast enough through impact. Meaning, you’re prone to slice it a whole lot more if your handles are too big.
Why is a thicker grip better for hitting the ball?
And if you naturally tend to swing too much with the hands and fingers causing you to hook , a thicker grip can help mitigate your handsy action through impact. Both instances are not paramount for everyone, though.
Why do golfers use grip tape?
Furthermore, several professional golfers often use grip tape to build up the lower region of the grip, thus reducing the taper. Depending on who you ask, this is also to mitigate hooking the ball.
Does grip size matter in golf?
Grip size, or diameter if you want to get technical, is often one of the most overlooked parts of getting your clubs fit for your game. And yes, it can make a huge difference in how well you swing the handle. Luckily, determining the right grip diameter isn’t all that difficult. The trick is to look at your golf glove.
Can thicker grips make you swing faster?
Some players might actually swing faster with thicker grips and so on. It’s really up to you and your club-fitter to test and find out what works best for your swing. Additionally, some players opt for different grip sizes on different clubs.
What happens if a golf club is too short?
If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
How to set yourself up to play golf?
In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.
Why is it important to get fit for beginners?
“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.
Does Daniel Berger use cavity back irons?
Daniel Berger uses cavity-back irons from 2011! Many amateur golfers of varying skill levels stunt the improvement of their games by believing they’re “ not good enough ” to get a club fitting. They say that once their golf game starts to improve they’ll invest in a professional fitting, but it’s not worth it yet.
Will my swing patterns change?
It is likely that your swing patterns will change after a number of lessons. Your angle of attack may change, your method of releasing the club could shift, and you will (hopefully) gain some speed and strength, too.