The absence of a spin in this test could mean your Yamaha golf cart’s battery pack is failing. The controller is one major component that may have to be replaced. A faulty controller can stall the cart and the click you hear must be from the solenoid.
How to fix Yamaha golf cart solenoid not clicking?
G16 Yamaha Golf Cart Solenoid Not Clicking 1 Take a jumper wire. 2 The ignition key must be in the switch and it should be in the Start position. 3 Connect the battery posts to the two posts on the solenoid, either to the positive or negative post. 4 If the cart spins over, then your solenoid is not the issue. More items...
Why does my Yamaha G1 golf cart keep running?
Why does your Yamaha G1 golf cart keep running? Your Yamaha G1 golf cart might not be able to stop and shut off properly because of loose wires, a sticky solenoid or a sticky accelerator stop switch. Look at the TCI wire connector at the front of the engine.
How does a solenoid work on a gas golf cart?
This activates the steel rod in your solenoid, creating a circuit between the motor and the speed controlling systems on your golf cart. Once you release the pedal, the solenoid clicks off after a predetermined amount of time, saving your battery life. A gas golf cart solenoid works in a relatively similar fashion.
What happens when a starter solenoid goes bad on a golf cart?
In a gas cart, a bad solenoid prevents the starter from being engaged and therefore results in the engine not turning over. You will hear a series of futile clicking sounds indicating that the solenoid is faulty. Can you Bypass Solenoid on a Golf Cart?
Why is my golf cart solenoid clicking?
Check the wiring connections between the solenoid and the motor. If the wires are disconnected or are damaged you might hear the clicking sound from the solenoid. Replacing or fixing the faulty wires should do the trick.
How do you know if you have a bad solenoid on a golf cart?
If your golf cart fails to turn on when you turn the key on, this is the most obvious sign of solenoid failure. The solenoid clicks a little with the ignition system in regular operation; in most cases, a failing solenoid will not snap.
Where is the reset button on a Yamaha golf cart?
It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
How do you test a solenoid on a Yamaha golf cart?
Turn on the engine of the cart and press the pedal downwards. If you hear a clicking sound, then it means that the low side voltage is working. But, if there is no such sound, it means that either there is no low side voltage or there is a problem with the solenoid. Use a voltmeter and engage the solenoid.
Will a bad solenoid click?
A single “click” sound comes from the engine compartment or from under the car. This could mean that the solenoid is trying to engage but that the internal components are stuck and unable to work properly. Repeated “clicking” sounds usually indicate a dead battery.
Can a golf cart solenoid click and still be bad?
If You Have a Gas Golf Cart This means that your starter isn't able to disengage and that it's working all the time. In some cases, you might even start to hear lots of small, continuous clicks when you try to turn on your cart. However, in spite of these clicks, your cart isn't going anywhere.
Why does my Yamaha golf cart not start?
As the main source of power to your electric golf cart, the batteries are commonly the cause for why your electric golf cart won't start. Acid-based batteries are typically used for electric golf carts and must be recharged in order to work properly.
What would cause a gas golf cart not to fire?
First, try this: turn the key switch on, hit the accelerator, and check for a clicking noise. If you don't hear clicking, it's time to take a look at your cart's batteries. Make sure the battery is fully charged and the terminals are cleaned and secure. Next, see how the water level in the battery is holding up.
Why is my Yamaha golf cart not working?
If your cart is sluggish or won't start, the battery may need to be charged. If it is charged, but still not working properly, make sure the battery terminal connections are clean and secure. You can use a mixture of baking soda and water to clean the terminals by removing corrosion and other debris.
Can you bypass solenoid on golf cart?
Bypassing Golf Cart Solenoid Method If you do decide to bypass the solenoid, this is what you need to do: Take the two larger wires that connect to the solenoid and connect them directly (keeping all safety precautions in place). This should do the trick and if it does not work then the solenoid is not the problem.
Can you bypass a solenoid?
5:037:29Solenoid Bypass - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do to bypass the solenoid. And make the starter turn is basically connect this hardMoreAll you have to do to bypass the solenoid. And make the starter turn is basically connect this hard copper wire to this point on the battery. Then you're not doing anything with the solenoid.
How do you check if a solenoid is working?
0:241:43How to use a Multimeter: Solenoid Testing - Purkeys - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have our meter set to ohms. If. You look at the two smallest posts here that is our coil. If weMoreWe have our meter set to ohms. If. You look at the two smallest posts here that is our coil. If we put our meter across it we will check and see what the coil resistance.
Why does my golf cart have no solenoid?
Golf cart solenoids are also typically one of the first components to fail in your golf cart, because they work very hard, turning on and off every time you stop and go in your golf cart. If you have an issue with no start or no go then your solenoid should be pretty high on your list of things to check.
What is a solenoid on a golf cart?
A solenoid, for our purposes, is a type of relay. A relay is a type of switch that uses a low power circuit to operate a high power circuit. A solenoid uses a magnetic coil (the actual solenoid) on a low power circuit to push a rod that closes a high power circuit. On your golf cart, this high powered circuit is either your ignition on ...
What is a golf cart go switch?
On your golf cart, this high powered circuit is either your ignition on a gas golf cart or your electrical motor power circuit for an electric golf cart. Basically it’s your golf cart’s go switch, and it’s absolutely essential to your golf cart’s ability to do its job. Golf cart solenoids are also typically one of the first components ...
What happens if a solenoid reads infinity?
If it reads infinity or open lead, then the solenoid has an internal fault and requires replacement. Your solenoid should also have a range that it operates in, and if the resistance reads outside of that range, you should replace the solenoid even if it works to avoid damaging other components.
What is the most important part of a golf cart?
One of the most important components of your golf cart is the solenoid. It is one of the main components of your golf cart that allows it to move. Whether you have a Yamaha, E-Z-GO, or Club Car golf cart, and no matter if it is an electric or gas golf cart, you need a properly operating solenoid to get anywhere. Contents [ show]
What to do if your solenoid doesn't work?
Before you run out and get a solenoid, you’ll have to test the entire ignition system this way to find out what’s not working, and it is a bit of a pain.
What is a micro switch on a gas pedal?
This switch is what sends the low power to the solenoid. The solenoid uses this to create a circuit between the battery and the starter, thus starting your motor and getting you grooving.
Why doesn't my golf cart solenoid click?
This can be a faulty wire connection, but can also mean the solenoid is beginning to fail. The golf cart solenoid doesn’t click when the accelerator is pressed. This again can be faulty wiring or a failed solenoid.
How to tell if solenoid is bad on golf cart?
The common symptom of a bad solenoid is no clicks when the cart’s ignition is on and you press the accelerator.
How to test golf cart solenoid?
A diode allows current to run in one direction, but not in the other. Testing the diode is a simple procedure. Remove the diode from the circuit and check the leads with a continuity tester.
What to do if your solenoid is not zero?
If the reading is not zero, then the solenoid is stuck and needs to be replaced. If the ohmmeter does read zero, set the cart to forward travel and turn the key switch on. Press the accelerator pedal (or have a friend do it) and you should hear a click. If you don’t hear a click, measure the resistance anyway.
How to check if a battery is low?
First, follow these steps: Step 1 – Check the battery voltage from the positive connection to the battery negative. A solenoid uses 12-18volts and low voltage will not activate the solenoid. Step 2 – If the voltage is low, check the cable ends for corrosion. Clean and charge the battery.
How to tell if a golf cart won't start?
The first and most obvious symptom is the golf cart won’t start. If it is a gas-powered cart, the engine doesn’t turn over, and if it is an electric cart, the cart doesn’t move. Now, on to the next symptoms…. The engine on the gas-powered cart starts, but the starter doesn’t disengage after starting.
Where are the solenoids on a golf cart?
In all golf carts, new and old, the solenoids can be found under the seat or in the engine well and are easily identifiable by the wires that lead to them. Banks of heavy duty solenoids, as in the previous illustration, are mounted on the side or back panel near the electric motor.
What does it mean when a golf cart solenoid goes bad?
Technically, in fact, a solenoid is a shape – a shape in which the length of something coiled is longer than the diameter of the coils. In engine starters, this refers to the smaller motor ...
Why do golf carts have solenoid?
The solenoid is simply there to allow electricity to flow freely to the controller and motor which will result in a running golf cart. RELATED: 4 Signs you need to Replace your Golf Cart Batteries.
Why is my golf cart not clicking?
On an electric golf cart, the most common symptom is the solenoid is not delivering electricity to the controller when the vehicle’s ignition is turned on. In normal operating conditions, the solenoid clicks on and off with the ignition switch. A failing solenoid will generally not click. Two things could be going on here.
How to check if a golf cart solenoid is silent?
On an electric golf cart, if the solenoid is silent – no clicking – use the setting voltmeter to DC volts using the 200 range. First, turn on the ignition while looking for a reading on the smaller terminals. If nothing is appearing, then press on the accelerator. If the needle doesn’t move, then the problem is not with the solenoid.
What does a solenoid do when you turn the ignition?
Step by step, it looks like this: When you turn the ignition key, a small amount of electricity goes to the solenoid. The solenoid uses that small amount of juice to close two heavy-duty contacts that allows a large jolt of electricity to pass through the starter. The solenoid also sends a pinion gear forward, which is the device ...
Why won't my solenoid click?
The solenoid might not be getting enough electricity to do its work – which could be caused by loose connections, a weak battery or the coil wearing out.
Why do you use electrical tape on a solenoid?
When you do this, use electrical tape to seal the cable ends, so they won’t form a circuit by accidentally touching each other or connecting through a metal conductor inadvertently. Doing this will ensure the vehicle will not run while testing the solenoid.
Why is my golf cart not clicking?
This may be because the safety reed switch is not working properly in the charger socket. There could be a loose connection of the MOLEX plug.
What is a solenoid in a golf cart?
A golf cart solenoid is one of the major components of any golf cart. This part is essential regardless whether you own an electric or gas golf cart because both types primarily rely on a solenoid for their movement. What this means is whichever brand or model you choose for your cart, a solenoid is truly an indispensable part of the vehicle.
What is a solenoid wiring diagram?
A solenoid wiring diagram can be very helpful in guiding you about the various connections made to and from the solenoid. This can come in handy when you set out to troubleshoot a problem in your cart on your own. The solenoid wiring diagram is generally very simple, straightforward and self-explanatory.
How to get a golf cart going without a glitch?
To get your golf cart going without a glitch, you most definitely need the solenoid of your cart to be functioning properly. Thus, it goes without saying that you must check this component occasionally to monitor its performance so that you don’t get stranded mid-way.
What does the inductive throttle sensor do on a golf cart?
When you push down the pedal of the golf cart downwards, the inductive throttle sensor sends out the first low power signal to activate the solenoid on its low side and the speed controller. The low side is the steel rod of the solenoid.
How often do solenoids work?
Since solenoids need to work very frequently; turning on and off each time you use the cart, they are prone to wear and tear easily. This is not surprising as they can switch on and off as much as 1,500 times a day). One of the first indications that a solenoid is faulty is when your cart fails to start.
What does it mean when your car doesn't start?
If the cart does not start, then it is a clear sign that your solenoid does not have a problem. However, if it does, this does not indicate that the solenoid is the cause of the problem. You will have to check out the complete ignition system.
Why is my Yamaha golf cart controller so hot?
The primary reason why a Yamaha golf cart controller gets too hot is because of overuse. When the golf cart is used for long periods of time, the controller can start overheating. The driving surface might also be a cause of heating. If driving on a straight and soft surface, the problem of heating should not occur.
Why is my golf cart not heating?
If driving on a straight and soft surface, the problem of heating should not occur. But, if driven on uneven or steep surfaces , there are chances of heating. Another reason could be the brakes. It is essential to check if the brakes are dragging while the golf cart controller is driven.
What to do if your golf cart controller does not increase?
If it does not increase, then there is a problem with the controller or the batteries. Examine the batteries and check if they are dead. If dead, replace them. Examine the controller, as discussed in the previous sections. Remember to always consult a mechanic to have your golf cart controller repaired.
What are the problems with a Yamaha G22?
Yamaha G22 also faces similar problems like G9 and G16. Overheating, battery faults, wiring issues, voltage issues are some problems that might occur with your Yamaha G22. To avoid these problems, test the golf cart’s major components connected to the controller regularly.
How to test Yamaha G16?
To test the Yamaha g16’s speed controller, check the voltage reading while pressing the accelerator. Test other components such as the batteries, the charger, and the solenoid for their smooth functioning. If any of these components do not work as expected, then you need to replace them.
Why is it important to troubleshoot a golf cart controller?
Troubleshooting the controller is extremely important for the golf cart’s smooth functioning. Generally, controllers face major issues only when there is a problem with wires or defects on the controller itself, such as marks or cracks.
How to troubleshoot a G9 controller?
Here are some easy steps for troubleshooting the G9 controller: Check the controller’s body to locate any major defects such as cracks, scratches, or black marks. If these are found, then replace the controller immediately. If no major defects are found, then check the wiring.
Why does my Yamaha golf cart keep running?
Your Yamaha golf cart probably keeps running because of loose wires, a sticking accelerator stop switch or a sticking solenoid. It could also be a problem with the engine stop relay or a problem with the voltage regulator. Your Yamaha golf cart keeps running because of loose wires. If you suspect the issue is loose wires, ...
Why won't my Yamaha golf cart shut off?
The reason why a Yamaha golf cart does not shut off can be because of loose wires or a faulty voltage regulator. Check to see if the engine wire connections are faulty. Also check the connection of the black and blue wires at the front of your cart’s engine. If you find that the wires are just disconnected, you only need to reconnect them ...
What to do if your solenoid is not clicking?
If you didn’t get a clicking sound, take your voltmeter and set it to DC volts on the 200 scale. Place a probe on each small terminal. With the cart in the forward position and the key on, step on your cart’s accelerator.
Why is my gold cart sticking?
There’s probably a sticking solenoid problem with your gold cart if there’s a noticeable lag between when you push the pedal and when your cart starts to crank. You can check and test for this problem using a voltmeter or test light. If you have a faulty solenoid, you need to replace it.
How to check if a Yamaha G9 has a sticky accelerator stop switch?
How to check if your Yamaha G9 golf cart has a sticky accelerator stop switch. Remove the floor mats from your Yamaha G9 golf cart. Take out the exposed floor plate and then unplug the stop switch. Next, open the wiring harness clip.
How to check if a G9 golf cart has a sticky solenoid?
How to check if your Yamaha G9 golf cart has a sticky solenoid. Unplug all the cables from the two large terminals. Wrap the cable ends in electrical tape and make sure to keep them separated. Put the cart direction switch in the neutral position with the key off.
How to check if a Yamaha G1 has a stop switch?
To check if your Yamaha G1 golf cart has a sticky accelerator stop switch: Take out the floor mats from your cart. Take off the exposed floor plate and then unplug the stop switch. Look for the wiring harness clip which you then need to open up.