In my opinion it's 61. A course record is just that, the lowest score shot on the course in a round played by the rules. If 5 people attested to it than that's good enough for me
Full Answer
Are golf clubs too long for accuracy and distance?
A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance. What I am saying is that the clubs most golfers are playing with, and even fitted for, are too long to maximize either; even when we call them “standard” in length. Comparing tour players to average players gives some anecdotal evidence.
Are your golf clubs too tall or too short for You?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance. Shorter players and taller players require the right clubs or else they won’t be able to perform to the best of their ability on the golf course.
Should the shaft of a golf club pass through the waistline?
When a player is fitted for new clubs based on length then their posture at setup is an important factor. Ideally, the shaft of the club should pass through the golfer’s waistline. If a golfer bends forward too much at address then the club’s shaft will fall below their waistline.
Why do most beginners get in trouble playing golf?
While it is generally thought that most beginners or high-handicappers get in trouble because they “come over the top”, the truth is that as many, or more, struggling golfers get the swing going too flat, deep, circular, or inside-out to effectively “get down” and compress the golf ball.
What do numbers on golf clubs mean?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck.
What does L 60 mean on a golf club?
A 60-degree wedge is considered a lob wedge and is mostly used to launch the ball high up in the air and land softly on the green. Examples could be hitting the ball over water or sand and quickly stopping it on the green. I used to have a 60 degree in my bag and it did come in handy in certain situations.
What do the letters on golf irons mean?
Again, breaking it down to its simplest form, the numbers on your golf clubs relate to how far they hit the ball - the lower the number, the further the ball should travel. A club with a #4 on it will hit the ball further than one with a #9 on it.
What lie angle should my irons be?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
Should I use a 60 degree wedge?
When To Use A 60 Degree Wedge. A 60-degree lob wedge is suited for better golfers and is perfect for launching the ball high in the air and having it land softly on the green. This wedge is ideal for hitting shorter chip shots but should not be the choice for full shots from the fairway.
What does l mean on a golf club?
A lob wedge, also known as a lofted wedge or an L-Wedge, is a wedge used in the sport of golf, known for being one of the shortest-hitting clubs and providing the most loft on a shot. Lob wedges are used to produce shots with a very high arc, and are most often used for shots over hazards and other obstructions.
What number club is a driver?
1-woodThe most common set of men's clubs is: A driver, usually numbered a 1-wood regardless of actual loft, which varies from 8° up to 13° A fairway wood, typically numbered a 3-wood and lofted about 15° (though 2- and 4-woods are sometimes seen)
What does S mean in golf?
Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft.
What does M on a golf club mean?
Why is senior flex represented by an A or M? "A" originally stood for "amateur." The "M" stands for "mature" or "medium." Also, of course, "S" is taken by "stiff."
Should my irons be upright or flat?
If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat. If the line is perpendicular to the grooves on the face, then your lie angle is correct.
Should irons sit flat at address?
How should a golf club lie on the ground? The golf club should address the ball with the toe set a few millimetres in the air – the clubhead should never sit flat on the turf. You should be able to fit a small coin under the toe of the club at address, with the heel remaining in contact with the ground.
What is the standard lie of a 7 iron?
62.5 degreesWhat Is The Standard Lie Angle For A 7 Iron? Most golf club manufacturers 7 iron lie angles are 62.5 degrees.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Which direction does the club face point?
If the toe of the club is up (relative to the heel) at impact, the clubface will point to the left (for a right-handed golfer);
Can irons be bent at the hosel?
If there's a problem with lie angles, most (but not all) irons can be bent at the hosel to increase or decrease the lie angle. And if you are serious about golf, want to maximize your scoring ability, and are shopping for new clubs, visit a clubfitter first.
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
How does the handicap index work?
The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What does weight on a golf club mean?
Swing Weight: The club is actually having more weight added to it. If you’re increasing the shaft by 1.25”, that’s more grams of weight (which many golf clubs are measured by), and it adds up. This makes the club a little bit harder to swing, unless you’ve been working with clubs that were too small this whole time and your radius has increased. The swing weight will determine your swing speed, if that’s something you keep track of, and be directly related to your distance.
Why use irons on flat ground?
Irons are used on flat ground and are supposed to give you a way to get the ball closer. If the club shaft was longer, you’d hit the bottom hemisphere of the ball on your downward swing and send it flying through the air. That’s not what we want.
Why do you need to lengthen a golf ball?
The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.
What is distance in golf?
Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.
Why are manufacturers cranking the lofts of their clubs?
Manufacturers are ‘cranking’ the lofts of their clubs because they would simply launch too high if they didn’t due to the forgiving and high-launching qualities on offer.
What is the degree of loft in golf?
The degree of loft on golf clubs helps separate them from each other as the loft influences the flight and distance of shots. A lower loft hits the ball further whilst a higher loft launches the ball up into the air with more spin. There really are no set lofts of golf clubs these days, with manufacturers bringing out clubs at all different lofts ...
Why do forgiving irons have higher lofts?
High launching, forgiving irons tend to come with stronger lofts because the ball launches high enough anyway so doesn’t need the extra loft. A lower loft combined with a centre of gravity positioned low and back leads to high iron shots that travel a long way.
How many degrees are 3 irons?
3 irons are usually around 21 degrees, equivalent to a 7 wood or 4 hybrid. The loft of a 3 iron tends to be around 21 degrees, equal to a seven wood or 4 hybrid. They are more common than 2 irons but many golfers still prefer to use a hybrid as they are easier to hit.
Why do better players like weaker lofts?
Better players tend to like weaker, more traditional lofts because they are good enough to strike the ball out of the middle more often than not so can get the launch needed.
What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?
According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.
Where should the straight edge be placed on a golf club?
The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft.
How to measure golf clubs?
Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
What should be taken into account when buying a new golf club?
When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.
How to tell the length of a golf shaft?
The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
Why is the length of a golf club shorter than the number below it?
Some more evidence that club length is overrated as a source of distance: In most sets of clubs, each iron is one-half inch shorter than the number below it. That is what creates the change in distance, right? Not really. Usually the clubs stop getting shorter above the 9-iron, meaning the various wedges are the same length as the 9-iron. And yet each wedge above the 9 hits the ball less far. Why? Because of the loft; the angle of the clubface has more to do with the change in distance from club to club than the length of the shaft.
What does a golfer look like when he picks up a 4 iron?
The average player, on the other hand, looks like he is swinging a flag pole when he picks up a 4-iron. He stands almost vertical in his posture, the club reaching across two time zones to reach the distant ball, and the shaft points at his belt-line and sometimes lower (except for beginners, who tend to stand upright and reach their arms straight out, which raises the handle much higher at address).
Why are long shafts attached to melon sized clubheads?
Thank goodness the long shafts are attached to melon-sized clubheads with tons of forgiveness, because the swing planes that result from these long clubs make it nearly impossible for most golfers to hit the sweet spot.
Why do you need a shorter golf club?
It takes a shorter club for most people to create the desired spine and shaft angles, swing planes, and contact with the ball. As would be expected, the shorter club and improved planes create better accuracy with the golf shots.
Why is a shorter club better than a longer club?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance . A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance. What I am saying is that the clubs most golfers are playing with, and even fitted for, are too long to maximize either; even when we call them “standard” in length.
How to compare tour players to average players?
Comparing tour players to average players gives some anecdotal evidence. Notice that tour players look “big” compared to their clubs. Even with a longer iron, say a 4-iron, they seem to be standing “on top” of the ball, meaning the ball is not too far from their feet. Their spines are generally bent forward a fair amount, and the shaft of the club points at the belt-line, and often higher.
What is the standard length of a golf club?
Tom Wishon, one of the top club designers in the world, said in his book The Search for the Perfect Golf Club, “Ninety-eight percent of men’s drivers these days are built to a “standard” length of 45 or 45.5 inches, and I am here to tell you that a 45-inch driver will not fit 90 percent of all golfers and will never allow them to achieve their best combination of distance AND accuracy.” This agrees completely with what I have seen on the driving range.
