The standard Callaway Golf Steelhead X-16 Irons have a shorter blade length and wider topline than the X-14 Irons, with the benefit of Callaway Golf's new "Notch" weighting. This moves weight to the perimeter for a strong, confidence-enhancing look behind the ball.
Should we focus primarily on the look of the stealth Irons?
But to focus primarily on the look would be a disservice. While it possesses none of the carbon-fiber cool of its namesake from the driver category, the Stealth irons are bathed in useful technology, starting with a multi-material cap-back design that is 7½ times lighter than the steel it is replacing.
Why do higher handicap golfers pull their short irons?
A lot of higher handicap players have an over the top, steep down swing so 2 deg up helps cut down on slicing, particularly with the longer irons. Unfortunately what you then see is that they tend to pull their short irons.
Why are short irons so stiff?
The reason is simple: When it comes to your short irons, control is more important than distance. Some manufacturers are increasing stiffness in short irons for more control and increasing softness in long irons for greater distance.
Should you use stiff shafts on your irons and wedges?
Senior pros Tom Watson and Lanny Wadkins are examples of players with such swings. Stiff shafts will allow you to better control your irons without sacrificing much distance. As Golf.com notes, almost all wedges have stiff shafts. The reason is simple: When it comes to your short irons, control is more important than distance.
Are steelhead clubs good?
Overall I really like the Steelhead XR and not only because of the familiar looks. The performance is very good and the combination of power and forgiveness feels great at impact and has you clubbing down with a smile on your face, especially with the longer irons.
What year did Callaway Steelhead irons come out?
2000When the club was launched in 2000, it was hailed as a revolutionary design that became the impetus for future Callaway irons, including the soon-to-be-released Steelhead XR that was introduced 16 years after Steelhead X-14.
What is a steelhead Golf Club?
The Steelhead XR Irons are where a signature shape meets breakthrough performance with our industry-leading, next generation 360 Face Cup. They deliver the finest combination ever of speed, forgiveness, distance and control in a Callaway iron.
Are Callaway Steelhead XR irons forgiving?
The Callaway Steelhead XR irons may be the return of a classic name in the Callaway lineup, but this modern take is forgiving, long, and easy to hit.
Are Callaway XR steelhead irons good for beginners?
The Steelhead XR irons sure have come a long way since the Steelhead X16s of many years ago. They are perfect for weekend warriors, mid-to-high handicappers and beginners looking for a top-quality iron that's good-looking, long, forgiving out of a wide variety of lies, and that won't break the bank.
What year were Callaway x16 irons made?
2002Callaway Golf Introduces Steelhead X-16 Stainless Steel Irons Featuring New ``Notch'' Weighting Design for Improved Forgiveness. CARLSBAD, Calif., Sep 30, 2002 (BUSINESS WIRE) -- Callaway Golf Company (NYSE: ELY) today announced an impressive extension to the Company's best-selling line of irons.
What is the loft on a Callaway Steelhead a wedge?
The Callaway Steelhead XR pitching wedge has a loft of 44 degrees.
When did Callaway Steelhead driver come out?
The first Callaway Steelhead fairway metal was introduced in 1998 and evolved into three versions – the original Steelhead, the Steelhead Plus, and Steelhead III.
What degree is a Callaway Steelhead sand wedge?
56 degreeCallaway Steelhead X-16 Sand Wedge This sand wedge is easy to hit from the sand, fairway and rough. It is a 56 degree club that has the right amount of bounce for traps and still allows me to hit it from 105 yards and in on all approach shots. It is truly the most valuable club in my bag.
When did Callaway Steelhead driver come out?
The first Callaway Steelhead fairway metal was introduced in 1998 and evolved into three versions – the original Steelhead, the Steelhead Plus, and Steelhead III.
When did Big Bertha Irons come out?
1994Following the success of the original Big Bertha Driver, Big Bertha irons were introduced in 1994. Similar to the driver, the clubs' oversized club-face and large, highly forgiving sweet spot targeted high-handicap golfers.
What years did Callaway Make Big Bertha Irons?
The first Big Bertha irons were released in 1994, and featured a large face and large sweet spot. In 1997 Big Bertha irons featured tungsten and titanium for added distance. From the early 2000s to current, the Big Bertha series has had a new release every two years.
What year did Callaway Big Bertha x12 irons come out?
1998X-12 Irons The Big Bertha X12s hit shelves in 1998 and featured stainless steel heads along with a lower CG for high launch.
Why do golfers hit thin shots?
Golfers who hit a lot of thin shots tend to swing the club too steeply into the ball. That's because they slide past the ball on the downswing and have to force the club down to make contact. When they slide too far, they catch only the top half of the ball, hitting it thin.
How to hit a golf ball with a 5-iron?
Tee up some balls as you would for a driver, and practice hitting them with your 5-iron. If you move in front of the ball on the downswing, like thin hitters do, you'll swing down too steeply and slide the club under the ball, making contact high on the face.
How to hit a ball solidly off a high tee?
To hit a ball solidly off a high tee with an iron, your swing has to be pretty level at the bottom. Make a full backswing and feel as if you're staying over the ball through impact. Ranked No. 1 by his peers among Golf Digest's 50 Greatest Teachers, Harmon runs the Butch Harmon School of Golf at Rio Secco Golf Club, Henderson, Nev.
How to hit a driver in golf?
Swing your arms back wide, and make a full shoulder turn. Try to get your back to the target ( YES ). Don't be too eager to hit the ball: Turn to the top, and then turn through . If you make a good move going back, you'll be in position to make a more level strike and stop hitting it thin. Tee up some balls as you would for a driver, ...
What happens if you don't wind up going back on the downswing?
The problem actually starts on the backswing. Thin hitters usually lift the club abruptly, without much shoulder turn ( NO ), which leads to the forward slide. If you don't wind up going back, you have nothing to unwind on the downswing. So you slide. Here's how to stop that cycle.
What does it feel like to chunk a golf shot?
All golfers know the pain of chunking golf shots. You take a powerful backswing, you feel like you’re about to hit a quality shot, then you swing down and feel the club hit the ground. When you look up, you see a huge piece of turf traveling down the fairway. Meanwhile, your ball has only gone a few feet. The chunk shot is a common problem.
How to start pressure on a golf club?
You should start with most pressure on the lead foot, shift to the trail foot on the backswing, and shift pressure back to the lead foot as you swing through. You can find more tips on pressure in the feet here. Third, check the butt end of your club at setup.
Why is the low point of a golf swing important?
This is significant because the low point of your swing follows the pressure in your feet. If most of your pressure is still in your back foot when the club comes back down, the clubhead is going to hit the ground well behind your golf ball. You wind up chunking the shot.
How to swing a golf ball with your feet together?
An easy way to do this is by standing with your feet together and the ball aligned with the center. Then, step your lead foot forward and your trail foot back and equal distance. Second, notice the pressure on your feet as you take your swing.
Where should the ball be in your stance?
You want the ball in the center of your stance. Maybe slightly forward of center, but only slightly. You can learn more about the importance of ball position in iron shots here. To get proper ball position on your irons, simply start with your feet together at address, ball right between your feet. Then, simply take your lead foot ...
How to get a feel for swinging irons?
Take your iron setup without the golf ball. As you swing the club back, step the trail foot back and behind your body so it’s perpendicular to your lead foot. Then step the trail foot back into place as you swing through. This drill helps you get a feel for strong rotation and natural movement in the body.
How to avoid steepness when swinging a long iron?
However, you don’t want your angle of attack to be as steep as it is when you’re hitting a short iron. In order to avoid that steepness, position the ball just slightly forward of center.
How does the club head change direction?
Think of the shape your club head makes as you swing through the golf ball. As you move through the transition at the top of your swing , towards the ball , the club head is traveling at a downward angle. At some point (more specifically, at the low point), your club head changes direction.
What irons are considered long irons?
First, make sure you know which irons are considered “long” and which are “short.”. Your long irons (2, 3 and 4) have a lower loft and are designed for more distance. (1 irons if you have them) Short irons (8, 9 and pitching wedge) have a higher loft and help you pop the ball up in the air as you get closer to the green.
How to hit down on a golf ball?
To Hit Down on the Golf Ball: At setup, position the ball in the center of your stance. Shift your hands toward the target just slightly so the club is in front of the club head. In the transition, think about pulling on the club with your lead hand instead of throwing the club out and down with the trail hand.
What is the goal of an iron shot?
For an iron shot, however, the goal is to hit down on the golf ball. Another way to say this is that your moment of impact should occur before the low point of your golf swing. It’s important to make this distinction when discussing how to hit irons because this whole down/up thing trips up a lot of golfers.
How to get better at golf?
As you take your golf setup, allow your head to float up a bit instead of tucking your chin close to your chest. Stay relaxed in the neck and shoulders. As you swing away from the ball, allow your head to slide away from the target. This accommodates for better rotation, better speed, and a better shot.
Which golfer has stiff shafts?
Senior pros Tom Watson and Lanny Wadkins are examples of players with such swings. Stiff shafts will allow you to better control your irons without sacrificing much distance.
Why are wedges stiff?
As Golf.com notes, almost all wedges have stiff shafts. The reason is simple: When it comes to your short irons, control is more important than distance. Some manufacturers are increasing stiffness in short irons for more control and increasing softness in long irons for greater distance.
What shafts do PGA pros use?
Most PGA Tour pros use stiff or x-stiff shafts. Depending on what type of swing you possess, stiff-shaft irons might help you control your shots better, achieve optimal results from a swing with a fast tempo and aid your short game. The most flexible shaft is designated as "ladies" and the least flexible shaft is called "x-stiff.".
What shaft should I use for a 90 mph swing?
If your swing speed is 90 mph or higher, a stiff shaft or an x-stiff shaft should be a good fit. As Scott Hennessey, president of shaft manufacturer True Temper, told Golf.com, if your shafts are too flexible, "you'll spray the ball all over the place.".
Can a stiff shaft hurt your golf game?
If you don't generate a high amount of club head speed, long and middle irons with stiff shafts are likely to hurt your game . You will have trouble squaring the club face at the moment of impact and will tend to push and slice shots. In addition, the flex of the shaft won't be whippy enough to increase your club head speed.