How does tip trimming affect Flex?
1:0911:44The Purpose of Shaft Tipping - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe more we get into the more we expose this wider. Section from from here on up. So we we take theMoreThe more we get into the more we expose this wider. Section from from here on up. So we we take the soft part away we leave the stiffer part which is up in this butt.
Should I tip my 3 wood shaft?
We generally do not recommend tip trimming on a driver or 3 wood shaft based on the shaft composition and how tipping could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results.
Do you tip trim taper shafts?
0:173:29Differences Between Taper Tip & Parallel Tip Iron Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo think about the tip section of a golf shaft taper tip shafts are going to taper all the way downMoreSo think about the tip section of a golf shaft taper tip shafts are going to taper all the way down to an outer diameter in the tip.
Should I trim my driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
What effect does tipping a shaft?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
What happens when you tip a golf shaft?
What Is Tipping A Golf Shaft? Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
What is tip trim?
“Tipping” or “tip trimming,” as it's sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it's most often cut.
What does tip flex mean?
Tip Flex: Tip Flex, or Retro Flex, represents the average stiffness toward the head side of the shaft. Sometimes this is measured in a very similar fashion as the static-flex measurement. The difference being that the tip end is clamped and the load is applied to the butt end of the shaft.
Does shortening your driver Help?
When fitting a driver, it's important to get loft, lie, shaft, and grip sorted, but better driving may be hiding in a shorter shaft. In fact, a shorter shaft should help you find the sweet spot more often and may even add distance.
Is a shorter driver easier to hit?
It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.
Do pros use shorter drivers?
“I very rarely build drivers that are 46 inches long,” says Murray, a former tour fitter who finds the vast majority of his clients are better off with a shaft that's shorter than the manufacturer standard. “On tour I very rarely built drivers that were over 45 inches long.”
How much can you cut off a driver shaft?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
What happens when you butt trim a shaft?
1:363:54How Does Butt Trimming a Golf Shaft Affect Playability? - YouTubeYouTubeStart of suggested clipEnd of suggested clipChange when cutting one inch or less or or more off of the butt end probably. The biggest downsideMoreChange when cutting one inch or less or or more off of the butt end probably. The biggest downside of cutting. Or making a closed shoulder is the effect that it has on swing weight.
How do you trim a driver shaft?
1:144:01How to Cut Golf Shaft DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the first step you have to remove your old grip. I find the easiest way to do this is toMoreSo for the first step you have to remove your old grip. I find the easiest way to do this is to literally just cut a line all the way down your club.
How much does it cost to trim a driver shaft?
The expectation is that your club-builder will trim the butt to achieve the desired final club length. For many standard length clubs, you will need to trim somewhere between 1/2" to 1". The lengths are longer than needed (for standard clubs) to allow for longer than standard clubs for taller players.
Why do you tip a golf shaft?
Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft ( the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such ...
How much should a golf tipping shaft be?
These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
Does trimming a shaft affect flex?
Handle trimming doesn’t affect shaft flex as much as tip trimming because most shafts become gradually stiffer as they move from tip to handle. For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
Who is Tom Wishon?
To answer these questions, we spoke with prominent golf club designer and builder Tom Wishon, founder of Tom Wishon Golf Technology. Wishon explained: "When golf shafts are manufactured and shipped to clubmakers and clubmaking companies, they are in what is called a raw, uncut form.
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
Why do you tip a golf shaft?
Tipping a golf shaft allows players to have more control over their club. It allows players to feel the proper flex and help control their ball flight trajectory. Making the shaft stiffer helps lower torque and lessens a golfers chances of twisting the club at impact which usually results in bad shots.
What does it mean when a golf shaft is tipped?
Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
How many inches does Tiger Woods cut his driver shaft?
Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft. About 90 percent of all fairway woods are trimmed on the PGA Tour. Woods are commonly tipped three to four inches.
What happens if you cut a golf club from the butt?
If you cut a club from the butt end then you will make the club shorter and stiffer. If you cut too much length off and shorten the club too much, you will have it stiffer but you might lose distance as well.
What is trimming on a golf shaft?
The trimming is selected to create a desired flex based upon the weight of each head, the length is might be normally assembled to, plus the length of the parallel tip section of the golf shaft (how long the shaft remains the same diameter as the very tip of the shaft).
Does shaft trimming make a golf club stiffer?
By shaft trimming less off of the tip than suggested, this will result into a slightly more flexible club, while trimming more off of the tip makes the club stiffer . However, this should only be accomplished if the clubmaker understands the consequences and more importantly if it is at all possible to begin with.
Should you trim the shaft before cutting?
It is always helpful to calculate the possibility of trimming additionally prior to cutting the golf shaft. While there might be certain times that the clubmakers may deviate from the recommended tip trimming procedure by the manufacturer, it is best to follow the normal tip trimming procedures whenever possible.
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.