
Advantages of Blade Irons
- Provide Consistent Feedback If you miss the sweet spot on a blade iron, you’ll know immediately. The vibrations will...
- Allow You To Shape The Ball One of the biggest advantages of blade irons is they allow for greater control when...
- Control Trajectory Blade irons are also great for controlling the trajectory of your golf ball. Again,...
- Aesthetic Design
Why play blades in golf?
The major advantage that blades give, aside from feedback, is control. It is MUCH easier to shape your golf shofts and hit high fades, low running draws, punch shots under the wind, landing and stopping a ball dead etc with the extra loft and feel that blades give you.
Are blades worth it for a beginner golfer?
May 19, 2021 · Most golfers think that as your game improves, you should graduate from playing cavity-back irons to blade irons. They think that moving into muscle-backs will help them became an even better player – one who strikes the ball flush every time they hit a shot, and is able to bend the ball left and right at will like Tiger Woods.
Are blades better for lower handicapped golfers?
May 03, 2020 · Advantages of Blade Irons 1. Provide Consistent Feedback If you miss the sweet spot on a blade iron, you’ll know immediately. The vibrations will... 2. Allow You To Shape The Ball One of the biggest advantages of blade irons is they allow for greater control when... 3. Control Trajectory Blade irons ...
How has the Golf Club blade design evolved over time?
Nov 13, 2019 · Should you be using blade golf clubs? Here are the three main reasons Golf Professionals choose to plays blades.Get your DST Compressor here with a 15% disco...

Why are blade golf clubs better?
What is the advantage of playing blades?
Do blades make you a better golfer?
Why do pros play with blade irons?
Should a beginner golfer use blades?
Can a high handicapper use blades?
Should amateurs use blades?
Why do I hit blades better than cavity-backs?
Can a mid handicapper use blades?
When should I switch to blades?
Do Tour players use blades?
Approximately 25 percent to 35 percent of PGA Tour players use blades, according to a 2011 “Golf Digest” article. Top players such as Luke Donald, Rory McIlroy, Phil Mickelson, Tiger Woods and Ernie Els all prefer blades to cavity-backs.
What is the difference between irons and blades?
What are the different types of golf irons?
Golf irons traditionally fall into one of several categories: 1 Super Game Improvement (SGI) Irons – like the Callaway Big Bertha’s 2 Game Improvement (GI) Irons – like the Taylormade Sim Irons 3 Player Irons – like the Titleist T200 4 Tour Pros – like the Ping iBlade
What is cavity back iron?
The cavity on a cavity back iron is designed to shift the weight lower down on the clubface (to help lauch the ball higher) and out to the perimeter towards the heel and toe of the club. This prevents the club face twisting as much on off center strikes.
What are blades in golf?
A blade iron is forged out of a block of steel, meaning there is no weight dispersion – what you forge is what you get. By comparison, a cavity-back iron is hollowed out so that the weight can be distributed around the perimeter of the club head.
Are blades golf clubs harder to hit?
Blades are certainly harder to hit than cavity-back irons. Because most cavity-backs have a larger club head, manufacturers are able to move the weight around easier than they can with forged irons. This enables them to redistribute the weight to the perimeter of the club, which prevents the face from twisting with off-centre strikes.
Do pro golfers use blades?
Around 26 percent of PGA Tour players use complete sets of blades. Roughly 44 percent game cavity back irons, while the remaining 30 percent use a mix of muscle-back and cavity-back clubs. At the 2010 Players Championship, 26 golfers competed using a complete set of blades, compared to only 13 golfers at the 2020 tournament just 10 years later.
When should you switch to blade irons?
In general, you should only consider using blades if you have a handicap under 10. However, if your handicap is improving, there is little reason to switch to blades as they are not guaranteed to drop your handicap any lower – in fact, because they are harder to hit than cavity-backs, they may actually make your ball-striking worse.
Can high-handicapper use blades?
It’s generally not recommended that high-handicappers use blades. They are less forgiving when it comes to off-centre strikes, meaning they will be much harder to use for beginner players who often struggle to control the low-point of their swing, and also their club-face direction and swing path.
Can a mid-handicapper use blades?
Mid-handicappers can use blades; however, they may benefit more from using cavity-backs as they still provide excellent feel and control, without being as punishing on off-centre strikes. Most mid-handicappers can strike the ball consistently enough, but likely not to the level that would enable them to use blades effectively.
How do you hit blade irons better?
Hitting blade irons are no different to hitting game improvement or muscle-back irons, however they may appear more intimidating to players due to their thinner sole width, smaller clubhead and lack of off-set at the hosel (commonly seen with beginner irons).
Pros And Cons Of Blade Irons & Should You Use Them?
A Blade Iron is the traditional Iron, before all this fancy technology helping you to hit it straighter, higher, further and with more forgiveness, everyone played with blades.
Blade Irons Overview
What makes a Blade Iron, firstly it is made from Forged Steel, the steel is melted and then forged into its shape usually with a really heavy press.
Advantages Of Blade Irons
Due to the forging process a Blade Iron has a much softer feel than the Game Improvement Irons, which are Cast Steel.
Disadvantages Of Blade Irons
There is no technology built into Blade Irons, this means they won’t be forgiving, as we said before, the better player isn’t looking for forgiveness, so this isn’t an issue for them.
How To Hit Blade Irons?
Blade Irons are not forgiving at all, so the first thing you need to do is hit them out of the middle. This is easier said than done.
Forged Vs Cast Irons
These are the two manufacturing ways Irons are made. Each is very different and produces a different result.
Blades Vs Cavity Backs
A Cavity Back Iron is a Forged Iron similar to the Blade, however there are a few differences.
Is Wired2Golf.com an affiliate?
Wired2golf.com is a member of Amazon Associates and other affiliate programs . As such, we earn a commission from qualifying purchases through links on this site at no extra cost to you. This helps us continue to create more great golf content!
How are cast irons made?
Casting – cast irons are created by heating metal to extreme temperatures until it melts. Then, the molten metal is carefully poured into the appropriate mold. After a designated cooling period, the clubhead will have taken its shape. There is a lot of debate about whether forged or cast irons are better.
Why use blade irons?
Allow You To Shape The Ball. One of the biggest advantages of blade irons is they allow for greater control when shaping the golf ball. Unlike cavity back irons, where the weight is positioned around the perimeter to reduce sidespin, blade irons have their weight concentrated in the center.
Blade Design
Strictly speaking, it may be wrong to call any modern iron a “blade.” Original blades were very thin and hard to hit, but along the way clubmakers learned that the head could be shaped to put more metal low and behind the hitting area for easier shotmaking. Those blades gained the nickname “muscle backs,” and were an instant success.
Cavity-Back Design
Golf manufacturers not only sought cheaper ways to produce irons, but also ways to make them easier to hit.
Cavity-Back Advantages
Cavity-back design allowed manufacturers to create an iron that did not require a perfect strike to make an acceptable shot.
Blade Advantages
Blades, however, retained certain advantages. A well-hit blade shot provided more feedback to good players, allowing them to better gauge how well they were striking the ball.
The Lines Are Blurring
These differences, however, are no longer as clear as they once were. Forged blades are now made with shallow cavities to improve accuracy, and cavity backs are being made that provide increased feel and maneuverability.
The Pros and Cons of Blades
Until relatively recently in golf’s long history all golfers used what are called ‘blade’ irons.
The Pros and Cons of Cavity Backs
The debate about whether a golfer should be using blades or cavity backs started when Ping invented the first Ping ‘Eye’ cavity iron in the 1960s.
Beware of a Mix Up and Watch Out for the Hollow Head!
While the differences between blades and cavity back irons were once clear the huge advancement of golf technology over the years has resulted in the clear line between the two becoming much more blurred
