You can modify the speed of an electric Yamaha golf cart in a variety of ways, enabling it to get you from place to place faster than ever before. Lift the seat on your Yamaha electric cart and locate the T-shaped governor in the cart's electric engine. This piece is a metal rod located near the top of the motor, just underneath the seat.
How can I speed up my Yamaha gas golf cart?
You can speed up your Yamaha gas golf cart with a number of simple tweaks. Power clean your cart using a hose, water and soap. Be sure to remove any excess dirt and grime from the wheels and wheel wells to allow your cart to operate at its most efficient. Remove any unnecessary accessories from the cart to lighten the cart's weight.
What is the speed limit for a Yamaha golf cart?
These carts use hight speed Yamaha controllers. A 2009 state law allows cities to designate golf cart zones on streets with speed limits of 25 mph or less. The measure was developed at the request of the Greater Hillyard Neighborhood Planning Alliance.
What are the most common problems with golf cart speed controllers?
Defective controller: It is crucial to examine the controller to identify the cause of any problem with the golf cart. If there are black marks found on the controller, then this is a significant defect. The controller should either be repaired or replaced. Battery terminals: Batteries also cause major problems for golf cart speed controllers.
How do you change the speed on a Yamaha electric golf cart?
1:012:57Yamaha G29/DRIVE Governor Speed Increase | ASK DAVE | Golf Cart ...YouTubeStart of suggested clipEnd of suggested clipAnd locating the governor under the service panel in the rear above the engine. For reference it'sMoreAnd locating the governor under the service panel in the rear above the engine. For reference it's just opposite the driven clutch at the rear of the engine. Compartment.
How do you adjust a speed controller on a golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
Can you adjust the speed on a golf cart?
Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.
How can I make my Yamaha Fuel Injected golf cart faster?
1:544:32Yamaha Drive 2 Quietech Governor Adjustment - GET MORE SPEEDYouTubeStart of suggested clipEnd of suggested clipDown to make sure that i'm getting maximum speed out of these carts i also like to make sure that myMoreDown to make sure that i'm getting maximum speed out of these carts i also like to make sure that my throttle cable is adjusted properly to ensure that the throttle. Body is getting open to the wide.
How can I speed up my Yamaha golf cart?
0:005:15Yamaha G29 Drive Golf Cart Governor Adjustment - MORE SPEED!!YouTubeStart of suggested clipEnd of suggested clipAnd the throttle cable on your yamaha g29 to get maximum. Speed.MoreAnd the throttle cable on your yamaha g29 to get maximum. Speed.
How do you remove the speed limiter on a electric golf cart?
0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.
How do you take the governor off a Yamaha golf cart?
General InstructionsDetach the cable from the carburetor. The cable is about the width of a straw. ... Follow the disconnected cable up to the governor. ... Disconnect the gas pedal cable from the governor and reroute it to the carburetor. ... Using your wrench, remove the bolt on the gas pedal shaft.
What is a speed controller on a golf cart?
The golf cart's speed controller sends its current and battery voltage to its motor. This entire process depends on your golf cart's input device, which includes its throttle. That's how the golf cart's speed controller allows you to operate its acceleration rate, as well as its deceleration rate.
Why is my golf cart so slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
How do you adjust the governor on a gas golf cart?
1:065:06How to Adjust an E Z Go Golf Cart Governor - WikiVideo - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut.MoreIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut. The more you tighten the larger nut the faster your cart will.
Why is my Yamaha golf cart controller so hot?
The primary reason why a Yamaha golf cart controller gets too hot is because of overuse. When the golf cart is used for long periods of time, the controller can start overheating. The driving surface might also be a cause of heating. If driving on a straight and soft surface, the problem of heating should not occur.
What to do if your golf cart controller does not increase?
If it does not increase, then there is a problem with the controller or the batteries. Examine the batteries and check if they are dead. If dead, replace them. Examine the controller, as discussed in the previous sections. Remember to always consult a mechanic to have your golf cart controller repaired.
What are the problems with a Yamaha G22?
Yamaha G22 also faces similar problems like G9 and G16. Overheating, battery faults, wiring issues, voltage issues are some problems that might occur with your Yamaha G22. To avoid these problems, test the golf cart’s major components connected to the controller regularly.
How to test Yamaha G16?
To test the Yamaha g16’s speed controller, check the voltage reading while pressing the accelerator. Test other components such as the batteries, the charger, and the solenoid for their smooth functioning. If any of these components do not work as expected, then you need to replace them.
Why is it important to troubleshoot a golf cart controller?
Troubleshooting the controller is extremely important for the golf cart’s smooth functioning. Generally, controllers face major issues only when there is a problem with wires or defects on the controller itself, such as marks or cracks.
How to troubleshoot a G9 controller?
Here are some easy steps for troubleshooting the G9 controller: Check the controller’s body to locate any major defects such as cracks, scratches, or black marks. If these are found, then replace the controller immediately. If no major defects are found, then check the wiring.
Why is my golf cart not heating?
If driving on a straight and soft surface, the problem of heating should not occur. But, if driven on uneven or steep surfaces , there are chances of heating. Another reason could be the brakes. It is essential to check if the brakes are dragging while the golf cart controller is driven.
How fast can a Yamaha golf cart go?
Electric Yamaha golf carts now come in a variety of models, and they can be tinkered with to increase their speed beyond the 10 to 15 miles per hour allowed by the manufacturer.
Where is the carburetor on a Yamaha cart?
This piece is a metal rod located near the top of the motor, just underneath the seat. Locate the carburetor, right next to the governor, on the engine. The carburetor features cylinders facing toward the governor, on the top and on the bottom.
How to speed up a Yamaha golf cart?
You can speed up your Yamaha gas golf cart with a number of simple tweaks. Power clean your cart using a hose, water and soap. Be sure to remove any excess dirt and grime from the wheels and wheel wells to allow your cart to operate at its most efficient. Remove any unnecessary accessories from the cart to lighten the cart's weight.
How fast can a Yamaha golf cart go?
While these vehicles are often restricted to around 10 to 15 miles per hour by factory standards and settings, you can speed up your cart in a variety of ways to have it moving as fast as 20 to 25 miles per hour.
How to remove speed restriction on a golf cart?
Open the seat of your cart to access the engine underneath. Push the governor toward the carburetor to remove this speed restriction. The governor is a T-shaped metal rod that you will find fastened with a rubber band or duct tape toward the cylinders of the carburetor.
How much horsepower does a golf cart need?
These vehicles will have motors with 5 to 10 horsepower, and controllers that can deliver 300 to 600 AMPS.
What is the most important part of a golf cart?
Even though the speed controller is probably one of the most important parts on your golf cart, not many people understand how they work or what they do. In this guide, we breakdown the speed controller so you have a complete understanding of their functions, and hopefully come out with the knowledge to make an educated decision on the type ...
What does a battery controller do?
With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.
Why is a speed controller important?
The Importance of the Speed Controller. The main objective for the speed controller is, as the name implies, to control the vehicle speed. Let’s say you try to operate that old DC motor without a controller. Any time you apply throttle, the full battery current and voltage is sent to the motor.
What is the function of a speed controller?
In addition to controlling the vehicles speed, there are a few other functions that speed controllers can offer, regardless of the motor you are using. Battery Current Limiter: This protects the battery from excessive discharge. This also pulls back the battery current as it depletes, which prevents cell damage.
Can you program a speed controller yourself?
Beyond the already mentioned functions of the speed controller, there are many other features available when programming the controller yourself. If you have a computer or a handheld programmer, then changing the settings on your speed controller is super easy.
Can you run a golf cart without a speed controller?
If your golf cart is running an AC or Brushless DC motor , you won’t be going anywhere without a speed controller. In these specific types of motors, electrical signals fire back and forth which reverse in direction at different times. This must stay consistent, and has to be timed precisely with the motors rotation.
Where to start with G19 golf cart controller?
Wherever the city of Wildwood looks for advice on G19 golf cart controllers, one place to start might the town of Lady Lake. In 1989, the notion first came up for people to get around Lady Lake's portion of The Villages, said police Chief Ed Nathanson.
Can you drive a golf cart in Lady Lake?
A few subdivisions in Lady Lake that are not part of The Villages also allow golf cart drivers, Nathanson said. In Lady Lake, people can drive golf carts with a Yamaha G19 controller 24/7, but to drive at night, they need headlights and brake lights, and preferably, some sort of reflectors, Nathanson said.
Is there an electric golf cart in Spokane?
Electric golf carts (using Yamaha controllers) may soon become a preferred mode of transportation in northeast Spokane. The Spokane City Council tonight is considering an ordinance to establish an electric golf cart zone in that part of town. These carts use hight speed Yamaha controllers.
