How to fix jerky acceleration on a club car golf cart?
One way to fix the jerky acceleration on a Club Car golf cart is to check if the battery charge is dropping and the battery is nearly dead under load. A load test will help you determine this. If recharging the batteries doesn’t help, getting a new battery or new batteries fitted should work.
Should I buy the original club car controller?
As most of the Club Car parts are not changed much in a given model or year and it’s up to your buying capacity whether you want to buy the original OEM controller or an aftermarket model. Original controllers come with the warranty and this adds to their advantages.
How do I know if my golf cart battery is bad?
This will determine if a bad battery is an issue. Jack up the rear of the cart and turn the key switch on. With the car in the forward gear, depress the accelerator so the tires and wheels are spinning greater than half speed. Then, slightly depress the brake.
What causes a 2006 club car to vibrate?
Vibration in a Club Car Precedent may be due to a malfunctioning MCOR, a damaged commutator, a blown-up motor, or out-of-round tires. A combination of these problems can also result in vibration in a 2006 Club Car Precedent with a stock controller.
Why does my golf cart stutter?
If your cart seems to run fine for a few feet, and then it stutters, it is most likely the batteries. If it is not the battery, then check if it is the speed controller or the resistor. If it is the controller, then you will need a replacement. Otherwise, upgrading the resistor can also solve the problem.
Why is my electric golf cart jerking?
Jerking electric golf carts are probably more common than a jerking gas model. That's because most “jerking” concerns are caused by battery issues or a poor flow of electricity from the battery to the cart. Typically, you'll start to notice this problem when your cart needs to charge up.
Why does my Club Car surge?
A golf cart may be surging due to faulty batteries, faulty battery cables, or because the speed sensor connection has become loose. There are one or more bad batteries or battery cables.
Why does my club car jerk?
A Club Car golf cart jerking from the front end of the golf cart occurs due to poor quality of tires. If the tires are worn out or loose, the golf car can start jerking. The uneven height of your front tires can also cause jerking.
How do I know if my golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won't start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
What is the MCOR on golf cart?
Club Cars use an MCOR throttle device. This translates your foot movement at the pedal into electric impulse that the motor controller reads. MCOR stands for "Motor Controller Output Regulator".
Where is the speed sensor located on a Club Car golf cart?
The speed sensor in a Club Car Precedent golf cart is located on the back of the motor. To remove the sensor, unplug the cables behind the motor. You can use a 5/16-inch socket to remove the pigtail connector and pop off the plastic housing that encases the speed sensor.
How long do golf cart engines last?
Golf Cart Motor Just like solenoids (mentioned above), your golf cart motor works HARD. When properly taken care of, the typical gas or electric golf cart motor can last many, many years (20 to 30+).
How many volts does a 98 Club Car DS golf cart have?
Hi all, when I press go pedal on my 48 volt 98 Club Car DS golf cart in forward or reverse the golf cart starts to go (barely) then shudders and the motor jumps and shakes under load. When on blocks with no load, all is normal and it works fine. At full charge the pack is @ 50.6 volts, turn key on 48.7 volts, depress pedal drops to around 35 volts. The resistance across solenoid main terminals is 1.4 ohms. Seems like the motor is just not getting sufficient voltage or current. Any thoughts on this ?
Why does my golf cart shudder?
I would start with checking the batteries. It could have a bad cable or cable connection so check those also. The voltage under load is way to low and will cause the golf cart to shudder like yours is. Welcome to Cartaholics Golf Cart Forum.
How many volts does a golf cart battery have?
Golf cart has been sitting and battery pack voltage is 48.6. Five of the batteries show 8.5 volts each and one battery shows 6.5 volts. looks like a trip to Sam's Club is in my future. whaddaya think?
What is a club car controller?
The Club Car controller is also known as a speed controller, and the best thing about the controller is that it works as a brain and speed control system for the golf cart.
Why is a golf cart controller important?
From being able to change your golf cart's speed to manage all the electrical components perfectly, the controller is an important element of your cart. You could say the controller is the heart of your cart. A properly selected and maintained controller will allow the vehicle to operate smoothly and safely. Learn more about your Club Car speed ...
Why won't my golf cart run?
If your controller is damaged, your cart won't run. However, a few other reasons could lead your vehicle to stop running. Since the speed controller is the heart of your electric golf cart, you need to make sure that the problem is not something else first. Following is a list of things to check before you troubleshoot the speed controller.
What to do if your golf cart doesn't start?
If the cart doesn't start, check the solenoid. If the solenoid is working fine and allowing power to flow, then you can begin inspecting the controller. Learn more about symptoms of a bad golf cart solenoid. If all the components are working well, the next step is to check the speed controller.
How to start a golf cart when it's dead?
Start with batteries and make sure they are working properly. If your batteries are dead, your golf cart will not start. Charge your batteries completely, and then try to drive the cart.
What is the function of a speed controller on a golf cart?
Following are some of the primary functions of the speed controller: Limiting Motor Current – Protects the motor and controller from damage in case of stalling and overloading. Limiting Battery Current – Managing current drawn from the battery ...
What does it mean when a controller flashes a Morse code?
Most controllers have an operation light that will start to flash a Morse code that will disclose the problem's secrets. If the code suggests the source voltage is incorrect, you need to go back to the previous steps. If the code indicates a faulty controller, the controller will need a reset or repair.
How to troubleshoot a golf cart?
GOLF CART CONTROLLER TROUBLESHOOTING 1 Make sure it isn’t your batteries! If your batteries are old and dead, then your golf cart will not operate. Charge them fully first and attempt to drive the unit. 2 If your batteries are fully charged and your vehicle won’t run, when you press on the accelerator pedal, then you should hear a clicking sound which will indicate the solenoid is engaging and allowing power to flow to your controller. If there is no distinct clicking sound, then check your solenoid. Also, it could have to do with something in the accelerator device as well. But, we can eliminate the controller as being defective. 3 If your batteries are fully charged and you get a clicking sound ensuring the solenoid is allowing power to flow to the controller, then you can begin inspecting the controller 4 Check all the wiring and signs of disconnection or damage. Also, most controllers will have an operation light that will begin to flash a morse code that will unveil the secrets of the problem. If that is the case and all of the above have been eliminated, then you are getting closer to determining it is the controller.
How does a club car controller work?
In this way, today’s modern speed controller’s meters out the battery voltage and current to the Club Car motors on the basis of numerous input parameters such as; throttle, brakes and twist grips. Hence, the operator of the Club Car would be able to control the speed at which Club Car is moving by the way of acceleration and deceleration cycles. Following are some of the main functions of the controller, irrespective of the type of the motor:
Why won't my club car run?
Due to their expense, you want to be sure your controller is the major reason and problem with your Club Car. First off, if your controller is bad, your vehicle won’t run. However, there are other reasons that could lead to your vehicle not running. Here are a few quick troubleshooting tips.
Why limit current to motor?
Limiting the current to the motor so that both motor and the controller could be protected in case of motor stalling and overloading.
What does it mean when there is no controller?
When there is no controller, it means batteries drainage is at its peak, as motors can operate independently at their high speed, which would gradually increase stress on the mechanical and electrical components and let motors and batteries degrade quicker.
How to tell if a controller is bad?
Check all the wiring and signs of disconnection or damage. Also, most controllers will have an operation light that will begin to flash a morse code that will unveil the secrets of the problem. If that is the case and all of the above have been eliminated, then you are getting closer to determining it is the controller.
What amps are used in a club car?
200-300 Amp controller would be the perfect one if you intend to use or using a Club Car for normal trips in your neighborhood or normal golf course trips. This controller is best suited for two passenger Club Cars. Salient features of this 200-300 Amp controller are as follows: