golf clubs when to change from metal shaft to fiberglass

Should you choose steel or graphite shafts for your golf clubs?

There used to be a basic rule for iron shafts – if you’re a strong, competitive player you choose steel, and if you’re older, slower, a woman, or generally not athletic, you choose graphite. Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible.

When should I switch from steel to graphite shafts in my Irons?

When should I switch from steel to graphite shafts in my irons? Good question, but a not so simple answer. The usual reasons to switch from steel to graphite are to play a lighter shaft to increase swing speed, or to reduce the amount of vibration from a steel shaft.

How to replace the grip on a graphite golf shaft?

How to Replace the Grip on a Graphite Golf Shaft. 1 Step 1. Place the club in a vise that has a protective rubber insert to avoid damaging the graphite shaft. You can purchase a special golf club vise ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items

How to fix a loose grip on a golf club?

Apply a wide piece of tape vertically, straight down the shaft, then wrap it around the club. Or wind thinner tape around the shaft in a spiral pattern, covering the entire grip area, including the opening on the end. Leave a bit of space between the spirals so you don’t cause any ridges. Peel off the outer protective layer of the tape.

When should you switch to graphite shafts for irons?

To date, plenty of golfers can benefit from iron shafts that weigh less than 60 grams and that's still the primary use case for graphite iron shafts. Golfers with slower swing speeds can benefit from lighter shafts than help them swing faster which creates higher launch, more ball speed, and ultimately more distance.

Do any pros use steel fiber shafts?

If you've read about the SteelFiber before, you'll know a number of top players use it, or have done in the past—Jack Nicklaus, Fred Couples, Rocco Mediate, Tim Clark, Mark O'Meara, and two world top-25 golfers who swear by the feel, consistency and power the shaft delivers.

How long do steel golf shafts last?

Again, you'll want to invest in irons with steel shafts rather than graphite shafts. A good rule of thumb to follow is if you're a golfer with a low handicap or just a casual golfer is to replace your golf irons somewhere around every four to five years or after around three hundred rounds.

When should I switch from graphite to steel shafts?

Graphite Or Steel For Wedges Most players that choose steel shafts in their irons will stick with that same material in the wedges. Steel in the wedges provides a bit more control, which is very important around the greens. Players that do not have as much strength in their game should go with graphite shafts.

What percentage of PGA players use graphite shafts?

What is this? It was therefore no surprise that we again found that 100% of the top 100 PGA Tour pros use graphite shafts in their fairway woods and hybrid clubs.

Do most pro golfers use steel or graphite shafts?

As discussed previously, most professional players use steel shafts in their irons because of their consistency. Accuracy with irons is key for pro players. When it comes to driver shaft and fairway wood selection, graphite is often the shaft of choice, even for pros.

Are 20 year old golf irons still good?

There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.

Do golf shafts lose stiffness over time?

Graphite shafts should not lose any stiffness or "wear out" over time. There is a THP TV mythbusters from the PGA Show a number of years ago with a leading designer and there are other episodes with Project X designer, Don Brown going over it as well. Some would argue they could wear out less than steel.

Do golf irons lose distance over time?

What is this? Golf irons will wear out over time. The clubs that you most often will be the ones to wear out first. This is because they are getting hit the most.

Should older golfers use graphite shafts?

Are graphite shafts better for seniors in golf? Yes, graphite shafts are the best choice for most seniors. As I mentioned, the shaft plays a major role in ball striking, consistency, and distance. The overwhelming majority of senior players would benefit from using a graphite shaft.

Who needs graphite shaft irons?

Benefits of Graphite Shafts This is particularly beneficial to players with slow swing tempos. Most golfers can realize an increase of at least 5 yards for each club. Graphite shafts are easier to swing for someone who has hand, arm or shoulder problems. Vibrations are muffled on mishits and less painful.

How far can a 60 year old hit a golf ball?

That being said, there are still older golfers who have incredibly high swing speeds. If you're able to drive the ball somewhere close to 220 yards, you're pretty much average....Average Driver Distance By Age.Age RangeAverage Driver Distance50-60211 yards60+196 yardsAll Golfers219 yards3 more rows

What does a good club fitter do?

A good club fitter will also speed up the search process and get you back on the course with confidence. With a good fitter, you can try all the relevant new drivers/irons/etc in one session, decide what you need to do, and get back to playing golf.

Why do drivers get hotter as they age?

In fact, some people theorize that drivers actually get hotter as they age because the face thins out very slightly.

How often should I check my wedge tech?

If you want a modern cavity back wedge with more MOI and precise CG, it’s worth checking in every three to five years.

Can you get rid of a putter?

Never. If you have a putter that works, never get rid of it. It won’t wear out (barring abuse), and while there have been improvements in putter design over the years, boatloads of money is still being won on Tour with putter designs that are decades old.

What shafts are used in PGA Tour driving irons?

In fact, a number of PGA Tour professionals are now using composite shafts in their driving irons, and some, like Brandt Snedeker, Matt Kuchar, and Fred Couples, are playing composite shafts in their standard irons. With all the different options, choosing the right iron shafts can be difficult. So how do you know if you should choose steel ...

Can you go back to steel after switching to graphite?

But he also finds that most get used to the new sensation very quickly and almost none go back to steel once they’ve become accustomed to graphite.

Does steel have a lot of vibration?

You prefer a smoother feel: As previously mentioned, steel transmits a lot more vibration to the body, which can contribute to injury. However, those vibrations are also called “feedback,” and some players absolutely need that for control of not only distance but also the clubhead itself.

Is steel shaft lighter than graphite?

Steel shafts are now offered in lighter weights than ever before but not as light as graphite and not as varied in the flex profiles available. Steel tends to have very low torque (rotation during the swing) and also a stiffer tip section, while graphite can offer much higher torque rates and more flex in the tip.

Is graphite or steel more consistent?

Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible. In truth, many of these generalizations were actually somewhat accurate, as graphite shafts were a work in progress for quite awhile.

When did steel shafts become legal?

In 1924, the USGA finally legalized steel shafts, although the R&A continued to ban them until the Prince of Wales used a set at St. Andrews in 1929 which helped force a rule change. In 1924, the first steel shafts were allowed in the US Open, They were allowed in putters only. The winner, Cyril Walker, used one.

Why is the Allan Lard golf shaft called a whistling shaft?

To reduce its weight, it was drilled with hundreds of small holes. The perforations helped enhance club head speed and reduced torque significantly. When swung, these holes caused a whistling sound, hence the "Whistler" nickname. But like the other steel shafts, they never caught on. Allan Lard's perforated steel shaft.

What wood was used for golf shafts in the 17th century?

The golf shafts in the 17th and 18th centuries were not yet made of hickory, but rather from ash and hazel or whatever hardwood was available locally including wood from trees such as danga wood, ironheart, purpleheart, greenheart, bloomahoo and bulletwood. The US used other woods from what was being used in Great Britain, ...

Why are Spalding clubs painted tan?

The clubs had steel shafts which were painted tan to give the impression of hickory. This practice was also done by other. manufacturers to help influence golfers to make the transition from hickory to steel. Spalding's steel shaft, painted to look like hickory.

What is a whistler shaft?

Nicknamed the "Whistler", Lard's shaft was made from a solid steel bar that was bored out and milled to form 6 sides. To reduce its weight, it was drilled with hundreds of small holes.

What wood was used for the club heads?

The US used other woods from what was being used in Great Britain, including ash and lancewood. Club heads were made from tough woods such as beech, holly, apple and pear. These were connected to the shaft using a splint and then bound using leather straps.

What is Spalding's shaft?

Spalding's steel shaft, painted to look like hickory. It was not until some advances were made in the raw steel material and new manufacturing processes were developed, enabling the production of a stepped-down shaft, that steel started showing signs of becoming a clear favorite.

What is Fujikura Pro shaft?

One of the biggest names in driver shafts also makes some of the best composite iron shafts, and the Fujikura PRO is one to take seriously. Available in weights ranging from 70g to 117g, the PRO features High Density Composite Core Technology (HDCC) to deliver steel-shaft swingweights for improved feel and performance. HDCC composite also significantly reduces unwanted vibration while providing consistency that’s even greater than a comparable steel shaft. Flexes for the Fujikura PRO Iron shaft include soft R to Tour X and everything in between.

Can you swap steel for graphite?

Now’s the time to swap steel for graphite in your iron shafts. A switch graphite iron shafts, such as these four models, could transform your game. Steel-shafted irons have been the standard for decades, but that doesn’t mean they should be the standard for you.

Does the ballistic shaft have a spine?

The bottom line is that the Ballistic shaft has no spine, doesn’t “oval” during the swing, and transmits energy exceptionally well. In other words, it’s a gamer. Available in a range of flexes at 99g. Paderson Kinetixx Ballistic shaft.

Does graphite shaft dampen vibration?

Not only do modern graphite iron shaft models offer far more options than steel, they can dampen damaging vibration and are much easier on your body. For starters, check out the four on this page. Each offers great feel, exceptional consistency and big-time performance.

What was the first material to be used in golf clubs?

Iron was the first material that altered the so popular persimmon, by which golf clubs, especially golf shafts, were made up to the 19th century. Today is scarce to find a golf club made of pure iron. Developed alloys dominate in the production of the club heads and shafts.

What is the best metal for golf clubs?

Tungsten is another preferred metal alloy for making up golf clubs due to its strength, density, and high resistance to wear. The alloy is mainly used for making club heads. Club heads made by Tungsten provide the necessary strength and durability without adding extra weight, which makes them quite comfortable.

What is the hardest metal to play golf?

Maraging Metal is considered the hardest metal in golf. It is a type of Stainless Steel, got through a unique process of hardening. It is not among the most popular materials in the golf industry but finds preference for making up high-performing woods and utility irons.

What is the most common type of steel used in golf clubs?

Chrome-plated steel is another very commonly used steel in the golf club industry. It is a complex type of steel similar to the qualities of titanium, used to make both shafts and club heads. It is a prevalent material for making up irons and wedges with proven compression and distance characteristics.

What is the softest steel for golf?

Carbon Steel is another type of soft steel, along with 304 steel, one of the softest known steels. Consequently, it provides perhaps the best feel possible for woods and irons. However, the restricted capability to compress the ball and lower distance makes Carbon Steel unpopular among professional golfers.

Where did golf originate?

Although historians attribute the origin of golf to 14 th -century Scottish society, some historical versions trace the appearance of the prototype of golf in ancient Rome. Romans used to play a game called Pangania, in which the basic idea was to hit a filled leather ball with a bent stick. (1) Nowadays, golf is conceptualized under the regulations of the R& A and USGA, which ratify every single component of this fantastic game.

Is HST aluminum more rigid than standard aluminum?

HST Aluminum is more rigid than standard Aluminum, and it also finds use for golf clubs among entry-level golfers. You can see most drivers made by HST Aluminum due to its lightweight nature. Its light but well-balanced weight allows the golfer to feel comfortable and confident during the swing.

How to loosen a club shaft?

There are two ways to do this step. One way to loosen the shaft from the clubhead is to heat the hosel, or connector, of the clubhead with a blow torch until the epoxy that is used to bond them together becomes liquid. Be sure that you wear protective glasses while doing this process. The second way is to cut the shaft right above the hosel ...

How long does it take for epoxy to set on a golf club?

Allow about 24 hours for the epoxy to completely set before you finish your golf club. Decide on the length of the club, then mark it where the cut should be made. Since the graphite shaft might shatter when cut, put on a few layers of tape on the cut line before you use a band saw to cut it.

How to remove graphite from a shaft?

A graphite shaft has a protective coating, so you must remove it from the tip of the shaft by carefully peeling it off with a putty knife. Then using sandpaper, rough up the tip so that it will bond tightly with the clubhead. If the inside of the hosel is smooth after you have cleaned it, use a wire drill bit to rough it up, as well.

How to change grip on golf grip?

Place a pan or paint tray under the grip area. Cover the hole in the butt of the grip with your finger or a tee. Then pour an ounce activating liquid, such as mineral spirits, into the new grip. Cover the open end of the grip with your thumb and gently shake the grip so the inside is completely covered with the fluid.

How long does it take for a golf grip to dry?

Adjust the new grip if necessary so it’s aligned properly. Allow the grip to dry for at least 30 minutes. Golfweeks' Adam Woodard breaks down the results from the match.

Is It Time For New Clubs?

The Guidelines

• Let’s start with the two most cut-and-dried parts of the equipment replacement decision: club wear and technological advancement. If a club is no longer performing the way you want because it’s worn out, it should be replaced. Similarly, you don’t want to be swinging persimmon when everyone else in your group has titanium. Of course, all these sugg...

See more on pluggedingolf.com

The Big Question

Other Reasons to Change