How do I know if my shaft is stiff or regular?
If your club feels dead when you swing, it is likely the shaft is too stiff. With the appropriate flex, you can tell when the weight of the head has loaded the shaft. If your club feels like a steel rod, it is probably too stiff.
How do I know what flex my shaft is?
"L" is the most flexible shaft and "X" is the stiffest shaft:"L" denotes "ladies flex""A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior")"R" denotes "regular flex""S" denotes "stiff flex" (might also be designated "Firm")More items...•
Are steel shafts considered stiff?
Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed. Selecting the right flex for your shaft is key to good ball striking.
How do you know if your shaft is steel or graphite?
Weight. The most important difference between graphite and steel shafts is their relative weight. The typical graphite shaft is significantly lighter than its steel counterpart, which should translate into faster swing speeds.
What swing speed requires a stiff shaft for irons?
If you're swinging the driver above 105 mph, it might be time to get some X stiff shafts in your set. Stiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex.
What swing speed requires a stiff shaft?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
What flex are steel shafts?
The most common flex, regular, is designated as "R" on the flex chart and is recommended for golfers who regularly drive the ball 210 to 240 yards and have a swing speed between 75 and 84 mph. Steel and graphite shafts are available in regular flex, which is appropriate for men with mid to high handicaps.
Can a high handicapper use stiff shafts?
Stiff shafts are appropriate for men with single-digit handicaps as well as some with handicaps 10 to 15 who have high clubhead speed. Stiff flex is available in graphite or steel.
What happens if your golf club shaft is too stiff?
There are a few tell tale signs that your shafts are too stiff, firstly you will lose the ball to the right, because the shaft is to stiff it will be hard to square up at impact, causing the face to be open when you hit the ball, this is going to produce a fade or slice shot, generally ending up on the right side of ...
Do most pro golfers use steel or graphite shafts?
In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.
Do you swing slower with graphite shafts?
Graphite Shafts These are much more flexible when compared to the steel shafts. This makes them a perfect choice for those who prefer lighter clubs and have slower swing speed.
Do golf pros use steel or graphite shafts?
Over the past decade, graphite has become the material of choice on the PGA TOUR for shafts in drivers, fairway woods and hybrids, as pros have shifted away from steel and into lighter composites that increased swing speed and distance.
How many yards is stiff shaft?
Anything more than 250 yards, stiff shafts are for you. Unless you are a huge hitter and average about 300 yards on your drives, stay away from Extra-stiff shafts. Nine times out of 10, this method works well, but you still need to be comfortable hitting with whichever shaft you choose.
What is a senior flex shaft?
The Seniors flex is meant for golfers who swing a bit harder. A Regular shaft is used by golfers who hit the ball an average or farther than average length. For those long hitters, there are Stiff and Extra-stiff shafts that flex little.
What is flex in golf?
Flex is the amount that the shaft will bend when it is swung. All of us have heard the admonition, “let the club do most of the work”. If you choose the right shaft, that can be true. With the right shaft, you'll swing the club easier and get more distance out of your shots.
What is the most important choice when buying golf clubs?
One of the most important choices you have to make when buying golf clubs is which shaft flex to use , with 80% of golfers being suited to either regular or stiff shafts.
Why do golf irons have higher kick points?
Because stiffer shafts need more power or a more efficient action to work at their best, they usually feature higher kick points to help players control their ball flights. RELATED: Best Golf Irons. The right weight and kick point also play a part in finding the right shaft.
Is graphite shaft better than steel?
On the whole graphite shafts are a little lighter than steel alternatives and will help slower swingers find better, longer ball flights. For some golfers, lighter graphite shafts feel easier to use – helping to generate good ball flights with less effort.
Does a slow accelerating arc cause more lag?
This doesn’t just relate to players who swing quickly though, often a slow accelerating arc can generate more lag and power than someone who swings with a quicker tempo. Of course, the distance you hit the ball is one of the tell-tale signs about the shafts you need to be playing.
Is a stiff shaft stiffer than a regular shaft?
A stiff shaft is firmer and harder to bend than a regular shaft, and so more often than not, they’re also heavier in weight. As a rough rule of thumb, the more speed you generate, the stiffer your shafts should be.
What is the most popular decision a golfer makes?
One of the most popular decisions golfers face is whether to get a regular or stiff shaft in their irons, hybrids, fairway woods, and driver. Most resources will tell you to make that decision based on your swing speed. Unfortunately, they are wrong.
Is there a standard for shaft flex?
There Are No Standards for Flex. There is a lot of misinformation amongst golfers (and companies) regarding flex. The most important thing to understand is that there are no standards when it comes to shaft flex. One company’s “regular” could be another company’s “stiff.”.
Is graphite shaft lighter than steel?
Graphite tends to be lighter, but many companies are offering steel shafts in much lighter versions. Long story short, using your swing speed to choose a stiff versus regular shaft is not enough information. You need to know more about your golf swing tendencies and, more importantly, have someone who actually knows shafts well enough to match ...
Did Nick Price find a stiff shaft?
Despite having similar swing speeds, each player needed a much different shaft flex. Nick Price couldn’t find a shaft that was stiff enough for him. He applied so much force to the shaft with his swing length and tempo that he needed a much stiffer shaft profile compared to Fred Couples.
Can you buy a shaft based on your swing speed?
If you purchase a shaft based only on your swing speed and nothing else, you are just guessing. Other characteristics, such as weight, are important. Generally speaking, golfers with slower swing speeds can benefit from a lighter shaft and vice versa. That can be addressed using a graphite or steel shaft.
What happens if your golf club shaft is too stiff?
If the shaft of your golf club is too stiff for you, you will have a tough time hitting the ball straight. Your swing speed will not be able to release the club to turn it over enough and square up the clubface at impact. Almost always, if a shaft is too stiff for you, then you will hit the ball to the right.
Why do golf shafts get stiffer?
You will notice that as shafts get stiffer, they also get heavier. This is because there is usually a correlation between ball flight and player swing speed. The faster the swing speed, the easier it is to launch the ball.
How fast can you swing a golf club?
If you are continually swinging the club over 105 mph, then an extra stiff shaft is for you. Now, if you can go to the range and launch one and get a number of 125, that’s great news, but that is not your typical swing speed. When switching to an extra stiff shaft, you must be sure you can swing at this high speed for 18 holes, not two holes.
What is extra stiff shaft?
Extra stiff shafts are typically considered to be for better players, lower handicaps. This means that the majority of the models are blades or tour preferred irons.
What is flex in golf?
A golf club’s flex is the strength of the actual shaft. A golf shaft will also have a flex or a kick point that will affect the stiffness as well as the ball flight. If you are swinging a golf club that is not the correct flex for you, there will be effects on the golf shots you can hit. The five most common shaft flex options are Ladies, Senior, ...
Why are most complete sets made of graphite?
That is because the majority of the golfers who take up the game are not going to have tremendously fast swing speeds.
Is stiff shaft good for golf?
A stiff shaft can very likely lower your ball flight, and for some players, this may be a good thing. For faster swing speed players that have been using regular shafts, they may notice that they are getting a bit too much height and potentially losing some distance.
Why do you need regular shafted clubs?
If you have a slower swing speed, you are probably going to want to choose regular shafted clubs because the additional flex will provide a little more power and accuracy. When you swing harder, the stiff flex will be more controlled and give you the punch you need to hit better shots. One of the most common problems that many golfers face is ...
What is the most accurate depiction of your the type of flex you should have in your clubs?
Swing Speed. This is the most accurate depiction of your the type of flex you should have in your clubs. If you cannot get properly evaluated in your area, you can consider the other two options. If you have the right type of cellular device, you may be able to find an application that can assist you.
How many yards did Dave hit a steel driver?
Driver Dave hits a regular shafted steel driver 240 yards. Then, he used a graphite driver and hits it about 250 because of the increased clubhead speed. You need to be aware of the type of shaft material you are measuring with and make sure that it matches the clubs you would use when out on the course.
Should I hit a golf ball a mile?
Hitting the golf ball a mile can be a confidence booster and impress everyone around you, but if you aren’t hitting it where you want this can be a problem. If you have a driver with a regular flex and are hitting the ball long but inaccurately, you may want to consider going to a stiffer shaft. The stiffer shafts should provide you ...
What is the difference between golf shafts?
Differences in Golf Shafts. Golf shafts come in such a wide variety that it can be bewildering. Shafts are made from different materials, with different amounts of flexibility and torque, and in different lengths and weights. Compounding the problem, there is no uniform industry standard for shafts, so a stiff shaft from one manufacturer might feel ...
How long is a golf driver shaft?
Longer shafts have been the rage in golf in the early 21st century, with the standard driver length extending from about 45 to 48 inches.
Why do golfers use graphite shafts?
Many golfers gravitate toward graphite because its lighter weight can translate to more club head speed and more distance. Titanium shafts and hybrid shafts are also available, although neither have attained the popularity of steel and graphite.
What is flex in golf?
The flexibility, or flex, of a shaft refers to its amount of bend. Shafts that bend easily are suited for golfers with slower club head speeds. The extra flexibility enables a slow swinger to hit the ball farther.
What is the difference between graphite and steel?
Graphite shafts made a big splash when they entered the marketplace in the 1970s. Graphite is lighter and generally more flexible than steel. It also is more expensive.
Is there a uniform industry standard for golf shafts?
Compounding the problem, there is no uniform industry standard for shafts, so a stiff shaft from one manufacturer might feel completely different than a stiff shaft from another manufacturer. As Golf.com states, "you need to experiment with different combinations of shafts and clubheads to come up with your ultimate prize.".
What happens if you don't have a stiff shaft?
The result is a loss of distance. Added to this the direction control will be lost.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
What is carbon fiber shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance. Carbon fiber offers increased flex, greater clubhead speed, but reduced accuracy, due to more torque. It also dissipates the stinging shock from a poorly struck shot and will protect the hands and wrist.
What is flex in golf?
Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
Is there a real standard for shafts in golf?
It is accepted within the golf industry that there are no real standards when it comes to shaft manufacture and the different properties they all claim to have.