how to adjust golf club length

How to Adjust a Golf Club Length

• Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. ...
• Trim the Shaft. After you've decided to trim the shaft, consider whether to trim the tip or the butt end. ...
• Lengthen a Club. Extend your steel or composite shaft up to 2 inches by adding a piece onto the butt end of your club.
• Install a New Shaft. ...

Full Answer

How long should my golf clubs be?

Oct 22, 2012 · Subscribe Now:http://www.youtube.com/subscription_center?add_user=EhowsportsWatch More:http://www.youtube.com/EhowsportsChanging a golf club's length is some...

Can You align the length of your golf clubs?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be …

How do you measure the length of a golf club?

Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club; Six feet, five inches-add one and a half inches to the standard length of the club; Six feet, three inches to six feet, five inches-add one inch to the standard length of the club

Is a golfer’s overall height used when fitting a club?

Nov 13, 2006 · This video from Hireko Golf demonstrates How To Cut a Golf Club To Length. For more information visit www.hirekogolf.com or call 800-367-8912.

How long should my golf clubs be for my height?

1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows

Can I shorten my golf clubs myself?

If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

How do you know if your golf clubs are too long?

How Do You Know If Your Golf Clubs Are Too Long? The most common way to tell if your clubs are too long is that your back will be too upright, the toe of your club will be off the ground at address, and you will often make contact towards the toe of the club.

How do you properly measure the length of a golf club?

1:052:43Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipBack by the heel touching the ground. This is the correct way to measure. If the club is too uprightMoreBack by the heel touching the ground. This is the correct way to measure. If the club is too upright. Where the toe is resting on the or the club is resting on the toe or the heel.

Are shorter irons easier to hit?

Long irons are considerably harder to hit than short irons, and it is good to have a general understanding of this concept. The more prepared you are to take on these long iron shots, the better your chance for success.

Do pro golfers use shorter clubs?

The PGA Tour, however, resides somewhere in the 44.5- to 45-inch range, with some players going considerably lower. In 2017 Jimmy Walker cut two inches off his driver shaft to 42.5 inches, and Rickie Fowler shaved an inch off to get his to 43.5 inches.

How does length of golf club affect distance?

Our testing has shown conclusively that there is absolutely no measurable difference in distance due to the standard 1/2″ incremental shaft length increases between clubs. The only affect of the standard length increases between clubs is to make each successively longer club harder to hit.

Why are golf clubs different lengths?

As a club is longer (as well as lighter), then it can be swung faster up to a limit. The increased length provides greater leverage and speed to hit the ball further if solid contact is to be made. Shorter clubs are designed not for length, but rather precision.

How long should my 7 iron be?

So, as an example, where a man's standard 7-iron length may be 37 ¼”, a women's standard 7-iron would be approximately 36 ¼”. So, when making length adjustments for women, keep in mind that the shaft changes you make are measured as additions or subtractions to this shorter women's standard for club length.Mar 17, 2022

What is the standard golf club length?

Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is 'only' 44.5 inches, while the average driver length in golf shops is about 45.5 inches.Sep 21, 2018

Why did Lars start golfing?

Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.

Does golf club length matter?

Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.

How to measure golf clubs?

Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

How long is a nine iron club?

Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material. Typically, steel shafts are one inch shorter than graphite shafts.

How long is a driver?

Drivers: A standard driver measures in at forty-five inches in length . Three Wood: This club measures in at forty-two inches, which is two inches shorter than other types of woods. Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons.

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

Why is wrist to floor measurement important?

The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

How to measure grip size?

In order to determine your grip size, there are two measurements that you have to take. The first one is the distance between the tip of your middle finger and the main crease in your wrist. The second measurement is the length of your middle finger from the tip to its base.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.