How to measure the length of your driver shaft:
- Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
- Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
- Measure the distance from the edge of the grip cap to the heel.
Full Answer
How to measure the length of a golf club shaft?
– How to measure the length of a golf club shaft? In order to determine the length of your club, stand tall and get someone to measure from the crease where your wrist and hand meet to the floor. Do this with both hands and take an average of the two measurements. The following lists what length of shafts you should consider for certain heights.
Can you extend a golf shaft?
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
How to choose the best golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order.
How does shaft stiffness affect your golf clubs?
When the length of your golf club is adjusted to better suit your arm length and height, its shaft stiffness is bound to get affected as well. More specifically, when the current shaft length is shortened, the level of ‘stiffness’ of this shaft increases.
How long should my golf shaft be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do I determine my golf club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
What length of shaft do I need?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
What should my shaft length be for irons?
Iron Shaft LengthIRONSHAFT LENGTH for Men (steel/graphite)SHAFT LENGTH for Women (steel/graphite)5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches4 more rows
What length driver do I need for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How do you know if your golf clubs are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
How far should you hit a 7 iron?
Average 7 Iron Distances are following: Beginning golfers- 100 yards (men) or 60 yards (women) Intermediate golfers- 135 yards (men) and 75 yards (women) Advanced golfers- 165 yards (men) or 140 yards (women) PGA Tour Players- 185 yards (men) or 160 yards (women)
How do I know what golf shaft to use?
A player with a very fast swing will require a shaft with less flex, while a player with a slower swing will need a shaft with greater flex. Flex is generally rated as Extra Stiff (XS), Stiff(S), Firm(F), Regular(R), Senior(S), Amateur(A) and Ladies(L).
Do you lose distance with a shorter driver shaft?
Shorter shafts helped him increase spin rate and ended up not losing out on much distance but also found his golf ball in the fairway more as well. Now that's a win-win! The main thing to remember with your shaft length is to play the one that works for you.
Should shorter golfers choke up?
This also applies to pitching, sand shots, and hitting tight shots around the green. By choking up and making the club shorter, it's easier to accelerate and get the ball out of the thick stuff so you can have more putts to save par.
How do I know if my clubs are too short?
The most common way to tell if your clubs are too short is that your back will be bent over too much, the heel of your club will be off the ground at address, and you'll often make contact towards the heel of the club.
Should short golfers use shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
How do you measure golf clubs at home?
1:002:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipWith the center of the sole touching the ground in your ruler. Back by the heel touching the ground.MoreWith the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
How long should your golf clubs be if you are 5 7?
The traditional guidelines that people have been following for years are in the 2nd column above. It says people between 5 feet 7 inches and 6 feet 1 inch should use standard length clubs. As you get taller or shorter, you should increase or decrease the length by up to 2 inches.
What are standard golf club lengths?
Standard Club LengthClubMen GraphitLady SteelWood 5#4240,5Wood 7#, 9# usw.4139,5Iron 3#39,538Iron 4#3937,528 more rows
What is the standard length for a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches.
Series Navigation
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
Materials Needed
Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts.
About the Author: Zach Gollwitzer
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Step 1
Remove the old shaft. If there is an existing or broken shaft on the club, the first step is to remove it. You need to break down the epoxy bond between the shaft and the head. To do this, you need to provide even heat to the hosel (where the club head attaches to the shaft). This can be achieved by using either a torch or a heat gun.
Step 3
Prep the new shaft. Measure the depth of the hosel and then mark this depth on the shaft. Note: When prepping the new shaft, always follow the manufacturer's recommended tip trimming guidelines. Should you be installing a graphite shaft, be careful that the graphite doesn't splinter, as this will weaken the shaft.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
Does a longer shaft mean faster club head speed?
A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.
Weight
The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball.
Kickpoint
Depending on the kickpoint, your shaft will bend closer to the head or the grip of the club.
Torque
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
Cost
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
Conclusion
Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
How to measure the length of a golf club?
In order to determine the length of your club, stand tall and get someone to measure from the crease where your wrist and hand meet to the floor. Do this with both hands and take an average of the two measurements.
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What is the kick point of a golf shot?
The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.
