Custom Golf Club Head Cover
- Needed Supplies. Not having a sewing machine at my disposal, I had to do things the old fashioned way.
- Prepare the Subject. Figure out the best location for the opening for the club head. On my patient I felt it best to make entry into the belly.
- The Hard Part. This step can be a little confusing. ...
- Sew Sew Sew. Make sure the sock is in the position you want, animal stuffed inside so the opening in the belly meets up with the sock just ...
- Replace the Guts, Finish the Job. Unfold the sock from around the animal. Stuff the filling back into the animal. ...
How do you make a head cover for a golf club?
With moderate sewing skills, the creation of golf head covers is a practical project. Measure 1 inch down from the elastic cuff of the black sock. Cut straight across the flattened sock on the smooth, nonribbed part of the sock. Pin together two fabric rectangles with the 8-inch edges together, right sides of the fabric touching.
Can You Make your own golf club cover?
Club covers can protect your clubheads from nicks, moisture and rusting. But you don't need to spend top dollar on retail; you can easily make your own from inexpensive materials. How to Make Golf Club Covers. FINALLY a gift I can make for my Dad & Brother this Christmas. Using fabric scraps and old socks. DIY golf club cover.
How do I remove the pins from my golf head cover?
Remove the pins. Turn the golf head cover right side out to reveal a fabric box with a ribbed, elastic cuff. Pull the fabric box over the golf head, with the cuff cinching the handle of the club.
How to knit a golf club shaft cover?
Try using a decorative stitch for all or part of the shaft cover, such as the ribbed stitch, the brioche stitch, or the moss stitch. Change colors as desired. You can knit the golf club cover in a single color or you can change colors every few rows to create a striped effect.
What are golf headcovers made of?
Iliac Golf If you take a look at his collection of golf headcovers you'll probably start to drool. Everything is made from premium-grade leather and it will certainly set your golf bag apart at the course.
Do you need headcovers for golf clubs?
Head covers are not required, and most avid golfers use covers only for their driver, fairway woods, hybrid clubs and putter. However, there are also special covers for irons and a large variety of styles for all golf clubs.
How do you turn a golf headcover into a stuffed animal?
Step 1: Determine where you want the club to enter on the toy and cut along a seam.STEP 2: Cut the sock along a stitch line in the mid foot or end near the toe.STEP 3: Ready the sock.STEP 4: Stitch the sock to the stuffed animal.STEP 5: Replace the stuffing (use trial and error)
Do you put headcovers on after every shot?
If maximum protection is what you desire, then there really is no alternative to keeping the headcovers on at all times except for when making a shot. So immediately after taking the headcover off for a swing, it needs to be put back on to avoid any possible damage when carrying or driving the clubs.
Why do golfers hate iron covers?
Players who take this view will often frown upon golfers who use iron covers, mainly because they deem them to be unnecessary, fiddly, easy-to-lose items that are more trouble than they're worth.
Do new drivers come with headcovers?
Every driver, fairway wood and utility club come with headcovers these days and it would seem reasonable to assume that they were designed to keep the heads of those clubs looking shiny and new so that they can perform their best.
How do you make a golf club cover out of a sock?
Glue the cut end of each tube sock to the inside of the hole cut in the bottom of each stuffed animal. It's best to do this a little at a time. Apply a short line of fabric glue along the cut edge of the sock; then press the glue against the inside of the stuffed animal just above the hole you cut.
How do you knit a golf club head cover pattern?
11:1348:43Detailed Tutorial for a Knitted Golf Club Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd knit two purl. Two the pattern's in blocks of four stitches. If it was knit one purl one itMoreAnd knit two purl. Two the pattern's in blocks of four stitches. If it was knit one purl one it would blocks of two stitches. So i'm i've cast on 32 stitches. Here.
How do you crochet a golf head cover?
10:3133:09Driver Headcover, Quick Crochet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSingle crochet and then a decrease. So single single decrease single single decrease. And that'sMoreSingle crochet and then a decrease. So single single decrease single single decrease. And that's going to be just for this row. So we start with a chain.
What are golf club covers for?
Golf clubs are expensive. No matter how you carry your clubs, it's inevitable that they'll bump into each other at some point. To protect your clubs, we recommend investing in golf club head covers. Not only do they prevent chips and cracks, but they're a great way to make a statement.
How do you put on a driver head cover?
0:291:09How to Put Animal Head Cover onto Driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipCan be put on tooth drivers up to 460 CC now to put it on make sure the direction of the animal headMoreCan be put on tooth drivers up to 460 CC now to put it on make sure the direction of the animal head cover is the same as your driver. So for example just open it from the bottom.
How do you clean golf head covers?
Lightly hand wash head covers (that do not have leather components) by hand using a mild detergent and cool water. You may attempt machine-washing on a delicate cycle if you wish. Always use a mild detergent, free of dyes and scents and lay flat to dry.
How to make a stuffed animal out of a sock?
You will be sewing the stuffed animal opening to the sock about half way up the sock, just above the ankle. First cut the toe end off the sock and discard it. Turn the sock inside out. Then fold the the foot end of the sock over the calf. Then stuff the animal inside.
How to replace a sock?
Stuff the filling back into the animal. Make sure you refill the head or toes or tail of the animal if applicable. Do not put all of the stuff ing back in. You want to leave enough room for the club head. After replacing the stuffing, sew the toe end of the sock shut so the stuffing will not come back out. Stuff the foot of the sock inside your new Club Head Cover and you are done.
Instructions
Select and buy your materials. This is one of the most important steps, because you'll want to choose a fabric that is durable, non-abrasive and ideally water repellent. Good choices are heavy canvas, denim and upholstery fabric. You'll need about three square feet of fabric per cover. You'll also need one tube sock per cover.
How to Make Fun Animal Golf Head Covers
If you're looking for something a little more fun, you can make your own animal head covers using old things that you might already have lying around the house.
About the Author
Josh Baum is a freelance writer with extensive experience in advertising and public relations. A graduate of the University of Missouri - Columbia School of Journalism, Baum writes targeted, optimized Web copy, print advertisements and broadcast scripts for advertising agencies, publishers and Web developers throughout the United States and Canada.
How to finish a golf club cover?
A simple way to finish your golf club cover is to work decrease rounds until the top of the cover is closed. To decrease, insert your needle into the first 2 stitches on the left hand needle. Then, yarn over and pull the yarn through the stitches. This will leave you with 1 stitch on the right hand needle.
What is a golf club cover?
Golf club covers are essential for protecting your golf clubs from damage, and they look cool, too! It’s easy to create a golf club cover or a set of golf club covers for yourself or as a gift for someone, so this is a great project for any skill level. You will work the golf club cover in the round using double pointed needles and you can customize them using any color of yarn you like. Try out this project for a fun new challenge!
How to make a slipknot?
1. Make a slipknot. Loop the yarn around your finger twice. Then, pull the first loop through the second loop to create the slipknot. Slide the slipknot onto the first double pointed knitting needle and tighten the slipknot by tugging on the tail of the knot.
How to change colors on a golf club?
Change colors as desired. You can knit the golf club cover in a single color or you can change colors every few rows to create a striped effect. To change colors, wait until you are about to start a new round. Then, tie the new strand of yarn to the old strand of yarn as close to the stitch as possible.
How to know if a golf club cover is right size?
To see if the golf club cover is the right size for the club you want to use it on, try slipping the club into the cover when it is almost finished. This will allow you to see how much more you need to knit. Just be careful when you do this to prevent any stitches from sliding off the ends of the double pointed needles.
Where to put needle tip cover?
You may want to place a needle tip cover on the end of each needle. This will help to keep the stitches in place on the needles you are not using until you are ready to knit those stitches.
How to knit a front and back?
To knit front and back, insert the right hand needle into the first stitch on the double pointed needle in your left hand and yarn over. Pull the yarn through but do not let the old stitch slide off of the left hand needle.
How many points does a cover go through?
Then the covers are put together, and they go through a “5-point Quality Check Process” to ensure they are shipped to customers without defects
What is stitch golf?
Well, in simplest terms, Stitch Golf makes custom headcovers and custom accessories. From knit, to wool and leather. From drivers, to putters, to shoe bags and ipad covers. And they find their inspiration in the detail that makes their covers most unique. It’s all about the stitching. If you haven’t heard the name, you might recognize their designs.
Where is stitch golf made?
Stitch Golf – Hand Made in the USA. Even when it comes to their name, Stitch Golf, is all about the details. And, after working with them on our latest “MyGolfSpy Custom Cover”, I can tell you that those details aren’t limited to just their designs.
Is stitch golf a custom shop?
Stitch Golf’s pricing has been met with high praise, as they could be charging premium prices as others do, but they have a great niche business and offer a tremendous value to customers at the same time, all for the love of the game, as Steve says.” Stitch is not a custom shop by any means, but they offer something for just about everyone.
Thursday, August 10, 2017
Yes, a few days back I posted a Golf Digest video on how to make a weekend golf bag from a pair of jeans (or other material, for that matter). So I HAVE to post the companion video on how to turn a teddy bear into a headcover. (They used a panda, so I'm figuring you can use almost any stuffed animal. Cool!)
Ruthless Golf World Rankings (RGWR)
Viktor Hovland moves up one spot after winning a Rolex Series event this week, giving him a total of four wins (counting the Hero World Challenge).
About Me
Author of several golf books including Ruthless Putting and Stop Coming Over-the-Top, and editor of Classic Adventure Stories: Swashbucklers, a collection of classic sword-fighting novels. I've run the Ruthless Golf blog since mid-2009. And I've also done some writing for Golfsmith.com .
LoPan12
Edit: since I've been getting several folder requests after google drive updated something, new link!
RSinSG
They look super nice. Unfortunately my sewing skills are maxed out replacing a missing button. You should consider starting a side business.
cardoustie
two things: 1. some dudes are so freaking handy 2. you need a new putter cover You had me laughing that the dog was important
PeanutsDaddy
LoPan, I dreamt about your head covers a few nights ago. I think it may be time for a WRX vacation.
KevCarter
I couldn't do that in a million years. You are very, very talented. Those covers are gorgeous, and it must be a blast to be able to have 1 off, completely custom work setting on your golf equipment. Very well done, and thank you for taking the time to share both your work, and the pictures of the finished product. Cheers!!!
LoPan12
So...I tried to make an alignment stick headcover. I didn't take pictures going through, as I wasn't sure what would work, and I ended up trying a couple different things. This one won't be permanent, so if I do make a version 2.0, I'll get pictures.
billh17
Those are some nice finished covers. Look very professionally done. Good job !
