Place the sharpener on the first groove at an angle of 45 degrees. Don’t apply full force at the start. Move it back and forth carefully without applying much pressure. Repeat it five to six times until you see the actual color of the club steel.
Full Answer
What is a square groove on a golf club?
Square groove refers to the cross section of the grooves. Square grooves made headlines when the Ping Eye-2 irons were banned by the United States Golf Association for providing too much assistance to the golfer.
What are the rules for grooves on golf clubs?
For clubs with lofts of 25 degrees or more (five iron and shorter clubs) there are even more restrictions. The edges of the grooves must be round with a radius of between 0.010 and 0.020 inch. Contrary to popular reporting on this issue, these restrictions do not outlaw the U-shape, also know as square or box grooves.
How to sharpen grooves on golf clubs at home?
Using a groove sharpener is the easiest and most ideal way to sharpen those irons. They come in many variations, and you can buy them as per your budget. In this way, you can sharpen grooves on golf clubs at home in hardly 10 minutes with the following step-by-step procedure. First of all, you need to clean the dirt on your clubface.
Will wider grooves change the pitch of my golf clubs?
The groove pitch (grooves per inch) will not change but with wider grooves, the ratio of land area between grooves, to groove width to will most likely be reduced to less than the required minimum of 3:1. This will make them non-conforming with the rules of golf.
Are square grooves illegal in golf?
Under United States Golf Association (USGA) rules implemented on January 1, square or U-grooves have been outlawed but a 20-year-old Ping wedge was deemed legal because of a lawsuit won by its manufacturer over the USGA in 1990.
How do I make my golf clubs groove?
0:087:57I sharpened my golf grooves (unexpected results) - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn the past i have covered the grooves up with some tape i've also tested a wedge with no grooves atMoreIn the past i have covered the grooves up with some tape i've also tested a wedge with no grooves at all. But what happens when you sharpen your grooves.
How do you sharpen a square groove on a golf club?
Hold the groove sharpener like a pencil at a 45-degree angle to the face and draw it through the first groove. You don't want to use much force at first. Do the 45-degree angle approximately five times, or until you begin to see the surface of the groove begin to take on its original shine.
Is it legal to sharpen grooves?
The rules of golf state that grooves must be no more than 0.035 inches wide, 0.020 inches deep and 0.075 inches from any adjacent grooves. If you play competitively, using a groove sharpener could make your clubs non-conforming and illegal for competition.
What clubs have square grooves?
All Ping clubs manufactured up to 2010 have been manufactured with square grooves. The PING logo is present on the rear of the iron along with the club make, manufacturer Karsten's name and serial number. Ping clubs include: The G10, V2 Rapture, i10, S57, S59, Rhapsody, G5, Zing, Eye 2 and the Eye 2+.
Do deeper grooves create more spin?
Just like the tread of a tyre generates grip on the road each groove of a golf club grabs the ball to create spin. And just like the design of tyres where the depth of the tread is directly linked to increased grip golf wedges were historically designed with deep grooves to create more backspin.
Do I have V or U grooves?
The deeper, sharper grooves are called "U" grooves. "V" grooves are the opposite. They are much shallower and have rounder edges. The "U" groove can move much more debris away from the contact zone.
How much does it cost to Regroove golf clubs?
Golf Club Regrooving Services What is this? Using a restoration service will save you time and is normally very affordable to use. The average price of using these services ranges from $12 to $20 (USD).
Can I Regroove my irons?
1:012:52How to Regroove your Irons with the 6 Head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom isMoreAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom is to go just draw it backwards but it really doesn't matter work your way up.
How do you sharpen golf grooves at home?
1:515:13how to use your 6-head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can use whatever you have to hand if you've got a bike shirt or something a bit of bike oilMoreBut you can use whatever you have to hand if you've got a bike shirt or something a bit of bike oil will do the job.
How many times can you Regroove golf irons?
How Often Should I Regroove? We would recommend at least every 3-4 years. You should have your clubs cleaned and regrooved to allow you to play your best golf game. This process also gets rid of any rust that might be building up on your club (within reason).
Are ZIP Grooves legal?
As of December of this year (2010) they will no longer make clubs with the “ZIP” groove. But don't worry if you have already purchased a “Zip” Groove Wedge, the clubs will be legal for most players to use until 2024! (That's fourteen years from now… where will you be playing golf?
How much does it cost to Regroove golf clubs?
Golf Club Regrooving Services What is this? Using a restoration service will save you time and is normally very affordable to use. The average price of using these services ranges from $12 to $20 (USD).
Should I sharpen the grooves on my irons?
The grooves on your golf club are vital to both backspin and ball control on the golf course. Sharpening the grooves may be something that you have never considered doing before - but worn down grooves will not give you the control or backspin you're looking for.
Do I have V or U grooves?
The deeper, sharper grooves are called "U" grooves. "V" grooves are the opposite. They are much shallower and have rounder edges. The "U" groove can move much more debris away from the contact zone.
Why are square grooves illegal?
Square grooves were briefly banned from the PGA tour, due solely to a PGA rule that had nothing to do with the legality of the clubs themselves. Depending on which study you believe, square grooves provide no competitive advantage, or they provide slightly higher spin rates from the rough.
What clubs have square grooves?
All Ping clubs manufactured up to 2010 have been manufactured with square grooves. The PING logo is present on the rear of the iron along with the club make, manufacturer Karsten's name and serial number. Ping clubs include: The G10, V2 Rapture, i10, S57, S59, Rhapsody, G5, Zing, Eye 2 and the Eye 2+. Check the patent for legality.
Why are ping clubs illegal?
Ping golf clubs have grooves in the face, to assist the golfer in putting spin on the ball and to clear water away from the impact zone. Square groove refers to the cross section of the grooves. Square grooves made headlines when the Ping Eye-2 irons were banned by the United States Golf Association for providing too much assistance to the golfer. They are now illegal in elite-level competition and will be in the organized amateur game by 2024.
When were ping eye 2 clubs made?
US Patents D4512577 and D276644 stamped in the cavity of a Ping Eye 2 club denotes the clubs that were manufactured between 1985 and 1990 and have been "grandfathered" (allowed through old rules) onto the PGA Tour, despite the illegality of using similar clubs manufactured after this time.
Why are grooves important in golf clubs?
Why are golf club grooves important? The grooves are designed to allow water to flow and clean specks of dirt. This was the primary reason behind golf club grooves. Which ultimately helps to have better control even in wet conditions.
What is groove in golf?
In a golf club, grooves are the deep notch on the clubface to allow more control and spin on each swing. The grooves on a golf club can be both horizontal and parallel. Not just the spin, the groove is vital for a better chip shot or lofted shot as well.
How to sharpen a groove?
Things you will require in this process: 1 Brush (a toothbrush is recommended) 2 Liquid Dish Detergent 3 Warm Water 4 Lubricant 5 Masking tape 6 And last but not least, a groove sharpening tool.
How to clean a golf club with a toothbrush?
First thing first. Make some soapy water by putting some liquid detergent in the warm water and mixing it. Dip your golf club in soapy water and remove the dirt using a brush. You can use a scrubbing brush or toothbrush. You may even use a toothpick to replace a toothbrush, but that would take more time to clean.
How to cover a flat club face?
Cover the flat area of the clubface with masking tape
Should you sharpen golf clubs?
So, should you sharpen your grooves? The answer is yes and regularly. Scroll down to learn the process of sharpening.
Can you play golf without grooves?
Yes, without grooves on the clubs, it would have been challenging to generate spin, especially backspin, and control the ball while hitting. But this is not the primary reason behind grooves. Image Source: deolauto.ca. As mentioned earlier, grooves on golf clubs are as important as having treads in tires. A flat tire has a higher possibility of ...
Who invented the graphite shaft?
Frank Thomas, inventor of the graphite shaft, is founder of Frankly Golf, a company dedicated to Helping Golfers. Frank is Chief Technical Advisor to The Golf Channel and Golf Digest. He served as Technical Director of the USGA for 26 years and directed the development of the GHIN System and introduced the Stimpmeter to the world of golf.
Is the X-20 a good golf club?
If you are going to change sets then I can say that the X-20s are a good set of clubs as are the Ping G-10s which you have indicated you are looking at. But make sure you dont get a 2-iron or 3- iron in the set. They will sit in your bag, feel very lonely, and only take up valuable space needed for you hybrids.
Should I look around for new golf clubs?
If it is a) then yes, I think you should start looking around. I dont think it will be the new head which will affect performance as much as a better fitted shaft and the correct lie angle. A new set will certainly improve your outlook and give you a new sense confidence. The new clubs, after all, havent hit any bad shots so why wouldnt you trust them especially if you paid a lot for them.
What happens when grass juice gets between the clubface and the ball?
It is only when grass juice gets between the clubface and the ball that the grooves really start doing their thing. This only happens out of relatively light rough not the real juicy 4” stuff where it doesn’t matter what type of grooves or condition of those grooves makes any difference.
How long does it take to recondition a golf club?
First, don’t try to recondition it yourself. Second, to get it done professionally may take up to six weeks depending on whether the club head is chrome plated or not. Most forged iron clubs made of mild steel, will need to be protected from rusting, which requires a layer of chrome to be deposited on the head after the grooves have been milled, rolled or stamped into the face. Some clubs are forged but made of stainless steel, which do not require chrome plating. These, as with most cast clubs can be re-grooved and do not need the additional protective layer of chrome.
Can a hand held tool be used to measure grooves?
A hand held tool will not only do a number on the grooves but will most likely render them non-conforming because of the tight specifications the USGA has for grooves, i.e. depth, width, ratio of groove-width to pitch, radius of groove edges and even groove straightness.
Can you use a golf club without penalty?
This means for example, even though the face is concave or the grip has indentations for you fingers because this is how it wore down through normal use, it is OK to use it without penalty but as soon as you start reconditioning the club it must be considered new.
Can you recondition a wedge with a hand held groove tool?
First, let me say that using a hand-held groove tool is a risky way to recondition the grooves in your wedges. The reason is that as soon as you alter (recondition) the face of the club it is considered new and ruled on accordingly.
