
Does Puring a golf shaft really work?
Jan 11, 2009 · If you actually want to get closer to the PURE process, you'll want to flo the shafts too. It's essentially putting a laser pointer on the shaft and deflecting it and you'll want to figure …
What does it mean to "pure" a golf shaft?
Jan 25, 2016 · SST PURE Shaft Alignment finds the most stable bending plane or “Neutral-Axis” of the shaft. SST claims that when the club head is installed in the proper orientation with the …
How to pure a golf shaft?
Golf shaft PUREing is a technical process, which is one of several mechanical approaches to improving shaft performance. Hundreds of PGA Tour players have their shafts pured. And, …
Does pureing a shaft improve performance?
SST PURE Shaft Alignment, the leading golf shaft alignment technology on the PGA Tour and around the world, is available through The GolfWorks! SST PURE® identifies asymmetries that …

How do you prepare a golf shaft?
How do you clean golf club shafts?
How do you restore a golf club shaft?
- Dampen a rag and rub the club shaft anywhere that rust has formed. The rag will remove loose, flaked rust to help you see how much rust is sticking to the shaft.
- Pour some vinegar on a rag and rub the rag against the rust. ...
- Rub any remaining rust with fine steel wool.
What is SST shaft pure alignment?
Can you use WD40 to clean golf clubs?
Should you wax your golf clubs?
Will Coke remove rust from golf clubs?
What removes rust from golf?
Should you polish golf clubs?
Does SST PURE make a difference?
How hard should I hit my irons?
Does spinning a golf shaft work?
How to flex a golf club?
Clamp the grip end of the club in a vise and retest the alignment. Fine tune the vertical flex pattern by rotating the club head and grip a couple of degrees off the spine mark. Reposition the club in the vise. Repeat this process until the shaft flexes in a tight vertical pattern.
Where do you put the club head and grips on a golf club?
Affix the club head and grips permanently to that shaft, aligned with the labels.
How to tell if a golf club is aligned?
Test the alignment of the spine. Bend the shaft by lifting the free end a few inches and release. Watch the pattern of the shaft as it flexes back and forth. A tight vertical pattern means the club is aligned. A wobbly pattern means the club is not aligned.
Where to put masking tape on golf club?
Tape a strip of masking tape around the shaft just above the club head. Tape another strip of masking tape around the shaft just below the grip.
What does it mean when a golf shaft is pured?
To have a shaft that’s “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it’s in the most beneficial orientation for consistent performance when attached to a club head. Gear 101: What’s the difference between stepped ...
Why purge a shaft?
Simply put, as Briand explains, puring a shaft helps to identify the inconsistencies of a particular golf shaft as compared to the average or expected design of that shaft. That way, a club builder is armed with certain information to build the club in the most stable and consistent orientation.
What is SST pure shaft analysis?
To help offset or minimize the negative effects of a poorly manufactured shaft, SST Pure Shaft Analysis has a machine that analyzes shafts and finds the most stable orientation. The goal is to make sure the shaft bends on a neutral axis.
What is the most stable orientation of an asymmetrical shaft?
According to Tim Briand, Senior Vice President of GOLF’s sister company True Spec Golf, the most stable orientation of an asymmetrical shaft is to have the stiffest part of the shaft facing the target.
What does "pure" mean in golf?
We take a look at what it means to “pure” a golf shaft, or to have a set that’s “pured.”. Due to manufacturing tolerances, not all golf shafts are perfectly round or symmetrical. Any small imperfections — whether its wall thickness, roundness or otherwise — can cause variations in how one shaft performs versus another within the same model family.
What does it mean when a golf club is a lemon?
That means if you’re using a shaft that’s a “lemon,” or an outlier, and it has the incorrect orientation when it’s assembled, the club can either release too much or not enough at impact compared to what it’s designed to do.
What pen does JB use to mark the shaft?
So in the JB video he's bending the shaft downwards and marks the top with a RED markers and calls that the Neutral position and he marks 180* with a BLUE pen and calls it the Spine (the stiff part of the shaft).
What is the difference between pureing and spine alignment?
Keep in mind that spine aligning and pureing or floing are different things. Puring and floing essentially find the neutral oscillation plane, this usually does not line up exactly with the spine. Floing does this manually by eye. Pureing uses a computerized machine to do it. The link Brianson provided discusses all this including the Flo process.
Can you make your own spine tool?
You can make your own spine tool but check out the link below. JB's tool works great.
Do steel shafts have spines?
As far as different spine configurations go, steel shafts should just have one. When you get into graphite, the nature of the material causes multiple spines that spiral throughout. If you try it you'll see how depending on where you start twisting from it'll snap to different spots.
Does a shaft have a spine?
Being explained the process of puring I found that a shaft has a spine and that if that spine is positioned in a certain spot the shaft will have less frequency to move offline.
How does pureing help in golf?
PUREing not only helped players land their shots nearer the centerline, it also helped them to shrink their dispersion. The average distance between players’ furthest right and furthest left shots was 2.1 yards smaller with the PUREd iron versus the non-PUREd iron.
How long has SST been on the PGA Tour?
SST PUREhas been on the PGA Tour for over 15 years, and players using this technologyhave won over $1.5 billion.
Is SST pureing a placebo?
The SST PUREingprocess is no placebo, it’s one of the most impactful technologies that we’ve ever tested. I entered this test as skeptical as anyone, but the data combined with my own firsthand experience proved that PUREing your clubs definitely leads to improved performance. You can expect the clubs in my bag to be SST PUREd from here out.
Does adjusting the hosel change the shaft orientation?
You are correct , adjusting the club at the hosel will change the shaft orientation. This is why it’s important to be fit completely – including the settings – and to have the club build by someone who understands how the club is going to work for you.
Do golf clubs come from pure?
Clubs do not come from the manufacturer PUREd. The only way they’d be PUREd is if you bought them second-hand from someone who had them PUREd. Personally, I wouldn’t trust that a set is PUREd unless I knew the seller.
Is ST pureing the same as spinning?
SST PUREing is NOT the same as “spining” or “FLOing.”
Is a wedge bigger than a driver?
My thinking with regard to your first question is this: the dispersion with your driver is bigger than your wedge. You can easily hit a drive 30 yards offline, but that’s unlikely with a wedge. Hence there’s more room for improvement with the long clubs. That said, a foot or two can matter a lot with an approach shot, so I’m not sure it’s overall “less important” to PURE shorter clubs.
What is the score of a golf shaft?
The first graph shows the result of the Structural Analysis of your shaft. The result is a number from 1 to 100. If a shaft were perfectly round, perfectly straight and equally stiff all the way around, its score would be 100 and the line on the graph would be straight across the top. Such a golf shaft does not exist.
What is SST pure?
If you would like this service please call 1-800-848-8358. SST PURE Shaft Alignment, the leading golf shaft alignment technology on the PGA Tour and around the world, is available through The GolfWorks! SST PURE® identifies asymmetries ...
Can you align golf clubs with pure iron?
It is not possible to align screen logos on graphite or steel golf shafts that have received the PUREing process. PUREing may also result in screen logos not being uniform in location. This condition is a distinct indication that the golf clubs have been PUREd. The GolfWorks performs dis-assembly, PUREing and re-assembly of complete golf clubs. Complete golf club sets require 5-7 days before shipping. For additional information about PUREing services, contact The GolfWorks at 1-800-848-8358.
SST PURE – What is it?
The textbook definition might read something like this – A process by which a specialized machine locates the optimal (most stable) orientation of a shaft.
Pros
SST PURE proponents will cite internal and several third-party studies that show clear evidence of improved accuracy (dispersion) and distance. There’s also plenty of anecdotal evidence from golfers who testify to better performance after switching to PURE’d shafts.
Cons
When golfers buy a dozen balls or a new wedge, they know exactly what they’re getting for a given price. With a service like SST PURE the deliverable isn’t as clear. And that additional bit of mystery leaves plenty of room for criticism.
Left To Ponder
In situations where grey area far exceeds black and white, we’re left with more questions than answers. So, is SST PURE worth an extra $35 or so per club?
Who invented golf shafts?
The man responsible for making this technology available is Dick Weiss, a Florida businessman and clubmaker who has developed this highly sophisticated, patented process through which a golf shaft can be analyzed and its most stable position identified.
What is a Weiss-Gibson shaft puller?
The Weiss-Gibson Ultimate Shaft Puller makes club head removal as simple as 1 – 2 – 3. Let hydraulics do the work for you with this innovative new device designed to take time and effort out of club repair. The 4 ½-inch rubber clamp prevents slipping and does not mark shafts. Even first-timers can learn to extract club heads like a pro.
Why use SST Pure?
SST PURE technology, which locates the most stable orientation of any golf shaft to minimize off-line bending and twisting , is now available to all golfers through a domestic and international network of licensees. If you are serious about your golf, u0003hit every shot SST PURE!
Is a golf shaft straight?
Golf shafts aren’t perfectly straight or perfectly round. Studies have shown that irregularities in a shaft’s structure cause off-line bending and twisting during the golf swing. This causes an increase in shot dispersion or, in irons, u0003inconsistent performance from club to club. The SST PURE® Shaft Alignment System analyzes the structure ...
