Golf-FAQ.com

how to remove drums on a e-z-go golf cart

by Roderick Jast Published 3 years ago Updated 2 years ago
image

To remove a stuck EZGO Golf Cart brake drum, you can take a look at the following steps: First spray it with a good quality cleaner but make sure it doesn’t penetrate the inside of the hub. Remove the cotter pin and the castle nut. Now it’s time to back the brake lining off with the aid of an adjuster.

Full Answer

How to remove a stuck EZGO golf cart brake drum?

To remove a stuck EZGO Golf Cart brake drum, you can take a look at the following steps: First spray it with a good quality cleaner but make sure it doesn’t penetrate the inside of the hub. Remove the cotter pin and the castle nut. Now it’s time to back the brake lining off with the aid of an adjuster.

How do you remove the castle nut on a golf cart?

Take off the wheel and the castle nut and spray with PB Blaster. Let soak 15-30 minutes or so. Do not put the castle nut back on, but put the wheel and lugs back on. With the cart still lifted on the one side, beat the back side of the tire with a rubber mallet several times and it should come loose.

Why is my brake drum stuck on my golf cart?

The main reason the brake drum gets stuck on a golf cart is because of rust forming, and general wear and tear. The brake drum can get rusted on the cart, in which case it will be almost impossible to get it out. It is better to keep a lookout for such possibilities.

How do I remove the brake drum?

You keep on talking about removing the hub and I am not sure why you are trying to remove the hub to remove the brake drum. All you have to do is to remove the cotter pin (107), the castle nut (106) and back your brake lining off with the help of the adjuster. the tap the drum with a hamer a few times and it should pull of.

image

How do I push my E-Z-Go Golf Cart?

It can be frustrating when your battery is flat and your golf cart will not roll. To push it to the nearest charging or gas station, you need to release the motor brake. Follow these easy steps to do that.

How do you test an E-Z-Go Golf Cart Controller?

Depending on the E-Z-Go Golf cart you own, there are two types of controllers, the Drive control systems and the Precision Drive System. Only E-Z-Go carts made before 1994 have a Drive Control System. If you notice that your E-Z-Go golf cart is not running at a constant speed, you should troubleshoot the controller to identify the problem. Here are the steps you should use to test your E-Z-Go golf cart controller.

Why does my E-Z-Go Golf Cart feel sluggish when accelerating?

The reason why your golf cart is sluggish during acceleration or stalls depends on whether it is a gas cart or an electric one. Here are the reasons for sluggishness in both.

Why is my E-Z-Go golf cart losing power?

E-Z-Go golf carts often lose power because of corrosion or loose cables. If the connecting wires in electrical circuits break, your battery will lose power. The same will happen if you have a short circuit in the ignition system. Here are steps you can use to ensure that the system is working correctly.

Why won’t my gas golf cart charge the battery?

If you own a gas E-Z-Go golf cart, the battery may not get charged. Make sure that you have refueled your golf cart, and then check for the following issues.

Why does my golf cart stop moving?

This Golf cart is very temperamental, and even things like over-tightening a stud can make it stop moving. Check the F/R switch stud for overtightening. If it is over-tightened, the contact will not connect with the switch. Adjust this, and your golf cart will start working.

Why won't my golf cart start?

If your golf cart does not start even though the starter is rotating, there could be a problem with your battery, solenoid, or starter. Check the ignition and make sure you make the necessary repairs and replacements.

How do you fix a stripped hub on your EZGO golf cart?

To fix a stripped hub on your EZGO golf cart, follow the instructions below.

Why does your EZGO golf cart keep stripping the hub?

Your EZGO golf cart might be stripping the hub because the stock hub was made using a weaker metal than the drive axel. The teeth that make the wheel and tire spin might be worn down into nubs that don’t make contact anymore.

Why are the spindles in your EZGO golf cart loose?

Your spindles are probably loose because you’ve been taking your golf cart out onto uneven or hard terrain. This wears out your spindles quickly. Also, your spindles might be loose just from normal wear and tear.

How do you remove the spindles from your EZGO RXV golf cart?

The spindles in your EZGO RXV golf cart will get worn out over time. They’ll wear out and loosen even faster than normal if you drive your golf cart on rough or uneven terrain.

How to tighten EZGO golf cart spindles?

You can tighten your EZGO golf cart spindles by following these instructions: Lift up and support the front of your golf cart. Tighten up the lock nut to the appropriate torque. That’s usually about 56 to 70 ft.lbs of torque. Check and see if your spindle turns freely on the king pin tube after you’re done tightening things up.

Why is my cart hub stripping?

The hub may also be stripping because you often don’t bring your cart to a complete stop before switching the direction your cart is going into. Direction here meaning forward or reverse. This can be prevented by not doing what was mentioned above or by replacing your cart’s hubs and axels with more heavy-duty options.

Why is my golf cart wheel worn down?

The reason this is the case is because the wheel hub is made of softer metal than the drive axel. As time goes by, the teeth that hold and spin your cart’s wheel are eventually worn down till they are unable to make contact. Follow the instructions below to replace your stripped wheel hub. These instructions are applicable to most EZGO golf carts ...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9