Once you have the necessary tools, follow these steps to remove the governor:
- Disconnect the negative battery terminal from the cart. This will prevent any accidental sparks from occurring.
- Remove the screws that hold the governor’s cover in place. ...
- Use the wire cutters to cut the zip tie that holds the wires to the governor.
- Remove the screws that hold the governor to the battery pack.
How do you disable the governor on a golf cart?
You may have seen others racing around in their club cars and wondered how they got up to such high speed. They did it by disabling their's cars' governor, a little device makes the cart stay below a specific speed. Here is how to do it. Get behind the driver’s side seat and look for a small plastic plate that’s held in place by two small screws.
Where is the governor on an electric golf cart?
There is no governor in an electric golf cart. Most EZGO golf carts have four-stroke engines. However, there are a few carts with other types of engines. The governor adjustment process is different for both types of engines. Locate the governor arm of the golf cart.
How to adjust the governor on a John Deere Gator golf cart?
In a John Deere Gator golf cart, the governor is equipped with two governor arms. The bypassing can be done by carrying out a zip-tie action on both the governor arms. The following methods show you how to adjust the governor on your Yamaha G1 golf cart.
How do you bypass a governor on a carburetor?
This involves bypassing the governor and can be done in two ways. Drill out the governor arm and put a spring on it to stop the arm from flipping. Remove the cable from the carburetor to the governor followed by disconnecting the throttle cable from the governor and connecting it directly to the carburetor.
How do you turn off the governor on a electric golf cart?
0:101:28Golf Tips & Etiquette : Where Is a Golf Cart Governor Located? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell a golf cart's governor located is actually down in the motor. Compartment.MoreWell a golf cart's governor located is actually down in the motor. Compartment.
What does removing the governor do?
Removing the governor will increase the maximum rpm of the engine, but the internal parts of the Predator 212 are designed for 3600 rpm. Generally, this isn't an issue with just the governor removal, the internal parts can usually withstand 5000 rpm without breaking apart (unless you go full throttle for too long).
How do you make a golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
How can I make my gas golf cart go faster?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...
How do you bypass the governor?
1:299:11how to bypass the governor on a predator 212 engine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then run the cable through there. And then that will allow you to throttle. Up the engine. UsingMoreAnd then run the cable through there. And then that will allow you to throttle. Up the engine. Using the governor now to bypass the governor all you have to do is.
What happens when you remove a governor from an engine?
The governor is a plastic arm or flap that restricts the carburetor and throttle from speeding up the motor. Once you remove the governor, the engine will run at higher "Revolutions Per Minute," or R.P.M.s.
How do you remove the speed limiter on a electric golf cart?
0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.
How can I make my electric golf cart go faster without upgrading?
How to Make an Electric Golf Cart Faster Without UpgradesWash Your Cart Properly. ... Inspect the Batteries. ... Refill the Battery Water. ... Check the Gas Pedal and Linkage. ... Measure the Tire Pressure. ... Charge Up Your Battery Unit. ... Lighten Up Your Cart's Weight.
How fast can a golf cart go without a governor?
A typical electric cart without an upgraded speed control tops out around 12 mph.
How do you adjust the governor on a gas golf cart?
0:545:06How to Adjust an E Z Go Golf Cart Governor - WikiVideo - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut.MoreIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut. The more you tighten the larger nut the faster your cart will.
Why is my gas golf cart running slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
Do golf carts have governors?
Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.
What is it called when you remove a governor?
A recall election (also called a recall referendum, recall petition or representative recall) is a procedure by which, in certain polities, voters can remove an elected official from office through a referendum before that official's term of office has ended.
Can you remove the governor off a car?
To make a long story short, yes, there are ways to disable your car's speed limiter. Like most computers, the functions of your car's engine computer can be modified. But that's not always easy to pull off. Believe it or not, some cars have built-in ways to defeat the governor.
Can a governor of a State be removed from office?
Removal. The term of governor's office is normally five years but it can be terminated earlier by: Dismissal by the president at whose pleasure the governor holds office. Dismissal of governors without valid reason is not permitted.
Why do cars have governors?
Governors can be used to limit the top speed for vehicles, and for some classes of vehicle such devices are a legal requirement. They can more generally be used to limit the rotational speed of the internal combustion engine or protect the engine from damage due to excessive rotational speed.
How Does a Golf Cart Governor Work
Governors play an important role in electric golf carts by limiting the speed they can travel. This is an important safety feature, as it prevents the cart from going too fast and helps ensure passengers’ safety.
How to Take the Governor off a Golf Cart
Removing the governor from a golf cart is a simple process that can be done with common tools. Here’s what you’ll need:
Frequently Asked Questions about Golf Cart Speed Governors
If you’re looking for ways to speed up your golf cart, there are a few things you can do. Start by removing the governor on top of the engine if you haven’t already. If it doesn’t have a governor, then you’ll need to open up the cart and look at the gear shaft to see if it’s turning.
How to remove governor from golf cart?
How to Remove the Governor From a Golf Cart. You hit the links. The course is open in front of you as far as the eye can see. The only thing holding you back is the put-put-puttering of your golf cart. Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, ...
Where is the governor on a car?
The governor generally sits on top of the engine . This is the easiest way to find the carburetor. Once you've followed the cable up to the governor, disconnect it there as well. You can save this cable for later use or throw it away.
How to adjust a gas pedal on a cart?
Using your wrench, remove the bolt on the gas pedal shaft. Slide the shaft up so there is more play in the gas pedal. Tighten the bolt and then start the cart. You may need to adjust the gas pedal shaft a couple of times before you have it to your liking.
How fast can a golf cart go?
Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, you can double the speed of your cart and zip through your round.
What is a governor and how does it work ?
A governor is a device that automatically restricts the flow or speed of a machine. In case you consider applying this modification to your golf cart, note that it will make the engine run faster and with greater thrust which, in turn, will result in higher speeds.
How to remove the governor from a golf cart
The first step is to remove all air from the tires of your golf cart. This is done so that you can place it on a jack without the possibility for it tipping over and falling off. Refer to your owner’s manual if you’re not sure how to do this since each model uses different methods.
Why would you want to do this ?
There are two reasons why some golf cart owners decide to remove the governor from their vehicles.
Safety tips when removing the governor from your golf cart
Removing the governor from your golf cart is a job which requires that you respect certain safety precautions.
Final Thought
Now that you know more about how to remove your governor from a golf cart, go out and do it. However keep in mind that doing so will permanently disable the governor on your golf cart . This means you will lose control over the speed of your engine no matter what you do .
How to make a cart faster?
Step 1. The first option to making your cart faster is to replace the electronic speed control. This will enable more voltage to pass to the motor, producing the desired result. Unfortunately, this upgrade is not inexpensive as the unit can run anywhere from $100 to $1,000. Step 2.
How fast can a factory cart go?
The factory gear most likely has a 12.5:1 ratio, which allows the cart to achieve somewhere around 14 mph. If you swap out the factory gear for one with an 8:1 gear ratio, you'll up your top end to about 20 mph.
Can you drive a golf cart faster?
It should be noted that the golf cart you are trying to make faster may not be designed to do so. Weigh the options carefully and exercise caution whenever driving a golf cart at any speed. Remember that golf carts are not equipped with seat belts, air bags and other safety equipment that you find in automobiles.
How to find the governor on a golf cart?
Locate the golf cart’s governor; you can find the governor by tracing the thickest cable running from the gas pedal. This cable runs through the governor on its way to the carburetor. Use a screwdriver—or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.
Who is the writer of GolfCarCatalog.com?
GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.
Can a golf cart be a nuisance?
In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.
Can golf carts be adjusted manually?
By Richard Kalinowski. Governors limit the speed of golf carts but can be adjusted manually. In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds.
What happens if you have problems with your club car?
If you have problems with your club car due to overheating or other engine troubles, the company often won’t pay to fix it. Writer Bio. Jennifer Eblin has been a full-time freelance writer since 2006. Her work has appeared on several websites, including Tool Box Tales and Zonder.
Can you go to a maximum speed on a golf cart?
If you have a golf cart, in particular a club car, you know that you can only reach a maximum speed before the car levels off. You may have seen others racing around in their club cars and wondered how they got up to such high speed. They did it by disabling their's cars' governor, a little device makes the cart stay below a specific speed.
Does a governor void a club car warranty?
If you have posted speed limits in your area, you will still have to adhere to those. The governor helps keep your club car from overheating when the engine gets too hot. If you adjust the governor you’ll need to check the engine temperature yourself. This automatically voids your warranty.
