Ideally, you can just lay the club on a flat surface and pull to make the shaft straighter. Alternatively, you can also use a vise grip so that it is in a more stable position before bending the shaft to make it straighter. If it resists, you can try applying heat to make the material easier to bend.
Full Answer
Do you play the right shafts in your golf clubs?
Playing the right shaft in your clubs can be the difference in you flying that bunker with your drive, or hitting a super tight fairway with ease, it can also be the difference in you hitting more greens with your Irons.
What are the different shaft FLEXs in golf clubs?
You get Ladies, Senior, Regular, Stiff and X-Stiff shafts in Woods and Irons, generally your Woods and Irons will be the same flex. Your shaft flex will be determined mainly by your swing speed, and then by your ability, age and personal preference. Within each shaft flex there are different weights and kick points (bend points).
What happens when a golf ball is struck?
When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a ‘ballooning’ effect on the shot and it will tend to go quite high.
Can you straighten a golf club shaft?
Take your golf towel and rub the shaft vigorously up and down. The friction will heat up the shaft to a point where you can straighten a slight bend. (Yes, it actually works.) Use nail polish for a custom, Tour-pro-grade paint job on your irons and wedges.
How can I straighten my shaft?
2:2517:53Flame Straightening a bent Steel Spindle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the idea of heat straightening is is that you find the hot spot on the shaft or you find whereMoreSo the idea of heat straightening is is that you find the hot spot on the shaft or you find where the bend is on the shaft.
Is it possible to straighten a bent shaft?
A bent shaft can occur as a result of damage during shipment, rigging, or operation. Shaft straightening methods, when properly applied, can sometimes be used to salvage damaged shafting. Because of the different variables involved, shaft bend correction can be as much an art as a science.
How do you straighten a curved shaft?
2:0510:35How to straighten a bent drive shaft - Sailing & sailboat maintenance Ep ...YouTubeStart of suggested clipEnd of suggested clipAnd it presses it down between those two marks and you can actually see there's so much force in itMoreAnd it presses it down between those two marks and you can actually see there's so much force in it it's lifting up the end of the shaft bending it up they then keep it there for a few seconds.
What is cold straightening?
Cold straightening is the process of straightening metal without using heat; for example, removing damage from a panel with a hammer and dolly or pulling a damaged rail without heat.
What is flame straightening?
Flame straightening is an efficient, well-established method of correcting the weld distortion without impairing the material. Removing deformations with an oxy-acetylene flame. This process is based on the physical principle that metals expand when heated and contract when cooled.
How do you know if your golf shaft is bent?
0:382:12Golf Equipment: How Shafts Bend - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll. Right same clove head differ shaft this one's very stiff real stout shaft this one's hard toMoreAll. Right same clove head differ shaft this one's very stiff real stout shaft this one's hard to bend you'd.
How do you straighten bent steel?
6:209:47Astroquake series " How to Straighten metal" - YouTubeYouTubeStart of suggested clipEnd of suggested clipVise. If you can see just that short amount of work. That I did straighten this up quite a bit but IMoreVise. If you can see just that short amount of work. That I did straighten this up quite a bit but I got a little bit of a bend in here.
What is bent shaft?
Bent shaft is the most common fault in rotating machinery. Bent shaft generates excessive vibration in a machine, depending on amount and location of the bend. In this paper, order analysis technique of vibration analysis used for bent shaft diagnosis is proposed.
How do you straighten a steel rod?
2:3012:29How to straigten a machined metal rod using a lathe without cuttingYouTubeStart of suggested clipEnd of suggested clipAnd the way you straighten it out is you have a rod that sits back here. And you bring this rod. UpMoreAnd the way you straighten it out is you have a rod that sits back here. And you bring this rod. Up into contact with the shaft. On an area and then just basically you push it and you bend the rod.
How do you straighten a bent steel plate?
The steel should be heated slowly to around 600/620°C and straightened at that temperature before being allowed to cool slowly and naturally. The heated area should extend well beyond the area to be straightened and, if a gas torch is used, a high heat output nozzle is required rather than a cutting nozzle.
How do you straighten a steel rod?
2:3012:29How to straigten a machined metal rod using a lathe without cuttingYouTubeStart of suggested clipEnd of suggested clipAnd the way you straighten it out is you have a rod that sits back here. And you bring this rod. UpMoreAnd the way you straighten it out is you have a rod that sits back here. And you bring this rod. Up into contact with the shaft. On an area and then just basically you push it and you bend the rod.
How to replace grip on golf club?
Using a wrench, you unscrew the grip from your club’s shaft and attach it to the new one with epoxy glue.
How is the importance of golf shafts?
There are a lot of details to consider when choosing the right shaft for your club.
What is reshafting a golf club?
Reshafting is the process of removing the old shaft and replacing it with a new one. Here are some simple steps to follow in order for you or someone else to reshaft their own clubs.
How many different shaft materials are there?
Most manufacturers offer 5-7 different types of shaft material to choose from—so how do you know which ones will work for YOU?
How long do you have to wait before using a golf club?
One must wait at least 30 minutes before using the club to ensure that it has properly dried, or else they risk having their grip flake off again in no time flat!
Why are shafts important?
Shafts are important because they transfer power in vehicles.
How many sided tape to cover tail shaft?
To start, use the dedicated 2- sided tape to cover 25 cm of the tail shaft.
How to determine shaft flex?
Your shaft flex will be determined mainly by your swing speed, and then by your ability, age and personal preference. Within each shaft flex there are different weights and kick points (bend points).
What Happens If Your Shaft Isn’t Stiff Enough?
When the shaft is too stiff, it’s going to feel hard to swing, it’s going to feel heavy, and make you tired after a few swings.
What Happens If Your Shaft Flex Is Too Flexible?
If the shaft is too flexible, you will have a ‘whippy’ feeling in your hands, and you won’t be able to feel the clubhead on the downswing.
How Can You Measure Your Swing Speed To See What Shaft You Should Use?
These are called launch monitors , they track your swing speed, loads of other parameters.
When To Move To A Stiffer Shaft?
You should move to a stiff shaft once your swing speed moves into the next bracket, if you can’t track your swing speed here are some signs you need to go stiffer
What is shaft flex?
Shaft flex is how much the shaft bends throughout the swing, someone that swings it slow will need a more flexible shaft, while someone that swings it fast will need a stiffer shaft. You get Ladies, Senior, Regular, Stiff and X-Stiff shafts in Woods and Irons, generally your Woods and Irons will be the same flex.
Why is my golf club slice?
Try a more flexible shaft, when a shaft is too stiff the clubface struggles to turn back to square, which will present the clubface open at impact, causing the ball to slice. The more flexible the shaft is the easier it is to turn the clubhead over at impact.
HISPL
Do it by hand put the club head on the ground, hold the end of the grip and use your other hand to manipulate it pipe benders are too vicious for a golf shaft you might end up ruining it... I have seen more than a few hire sets bent back into shape by hand. OR for $10 buy a NEW shaft for it :P
XYB34A
the towell and rubbing the shaft will get it hot enough to mildly burn your fingertips if you touch it. have done it while playing golf, when u hit a rock under the turf. best way to do it for sure
99andaflake
Thanks for the responses - I just had a go at the towel method and it worked a treat. That should be a pinned topic!! I had searched for shaft and bend/bent but you just get a tonne of posts about lie angles. I love GolfWRX!
99andaflake
cool - it was bent at the second step up from the hosel - About a third of the way up the shaft. I bought the set for a pittance so to start re-shafting would have ruined some of the 'bargain-ness' of the set!! Plus I have no idea if my proshop would have had one of the older sensicore shafts in stock. Thanks again!
stage1350
If there's just a curvature in the shaft, bend it using the towel method. If the shaft has a kink or crease, reshaft it. You don't want the shaft to let loose and hurt anyone else.
kingotheworldma
I need to stay out of the rough and from I between trees and fences. Bent my 7i today. Will try this towel method before shelling out for a new Project x 6.5.
