What is Honma Golf?
March 30, 2020 – HONMA Golf is more than a golf club manufacturer. It is the creator of the most beautiful and elegantly designed clubheads in golf, and of shafts brimming with innovation and technology at the service of the golfer.
Why are Honma Golf clubs so expensive?
Honma is certainly a manufacturer that one likes to associate with "luxury". And even if there are clubs from Honma under 200€/piece like the Tour World irons, you can't blame anyone to have this association. Because Honma clubs with a high number of stars are simply too expensive.
What is the difference between Honma 3-star and Torayca golf clubs?
The HONMA 3-Stars are better in terms of shaft quality, as the M40X material of Torayca is incorporated. On the other hand, the 3-Star golf clubs are customizable at the loft, lie and length levels, and the colours of the clubheads and shafts can also be modified.
What makes Honma’s driver look premium?
The premium look starts with the crown. It is an ET-40 crown, supposedly the lightest carbon fiber in a driver, and it’s blacked out. Most manufacturers leave the carbon weave pattern on the crown, but Honma makes it look like a traditional driver.
What does R2 mean on a golf shaft?
Googled Description: The R2 is the equivalent of the modern day A-flex. Instead of calling it amateur or senior flex which is ability or age related, the R2 is simply a softer shaft than a standard regular flex for those with reduced swing speeds.
What does +2 mean on golf clubs?
Two degrees upright means that a golf club has a lie angle that is two degrees upright of standard. The standard lie angle is going to differ depending on the club you are talking about and the manufacturer.
What does R mean golf clubs?
regular flex"R" denotes "regular flex" "S" denotes "stiff flex" (might also be designated "Firm") "X" denotes "extra stiff flex" (might also be designated "Tour")
What does +1 mean on a golf club?
However, not long ago, your driver, which could be anywhere from 8-12-degrees, would have been labelled #1, marking the start of the 'scale' on where your other woods will slot in. Following on from this, we know that any other woods you have in your bag will have a higher number, which means more loft.
Does 1 degree upright make a difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
What do letters on a golf club mean?
Wedges are usually identified by a letter denoting their function (P, G, S, L, etc. sometimes with a W appended), or depending on the manufacturer, with a number denoting their loft angle (52°, 56°, 60°) and "bounce angle" (0-12°). The pitching wedge is the lowest-lofted club typically called a wedge.
What is a flex R golf shaft?
Regular. The most common flex, regular, is designated as "R" on the flex chart and is recommended for golfers who regularly drive the ball 210 to 240 yards and have a swing speed between 75 and 84 mph. Steel and graphite shafts are available in regular flex, which is appropriate for men with mid to high handicaps.
What shaft stiffness should I use?
In general, golfers with driver swing speeds over 95 mph should play stiff flex shafts, and those under 95 mph should play regular flex. Shafts also come in extra stiff (105+ mph) and senior flex (under 85 mph).
What shaft is best for my swing speed?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
What do club numbers mean?
The higher the golf club number, the more loft, the more intense the angle on the golf club face, which means the golf ball will travel higher, but for a shorter distance.
What are the different numbers on golf clubs?
How Golf Clubs Work: Numbers ExplainedDriver = 23o yards.3 wood = 210 yards.2 iron = 190 yards (use 4 wood or hybrid)3 iron = 180 yards (use 5 wood or hybrid)4 iron = 170 yards.5 iron = 160 yards.6 iron = 150 yards.7 iron = 140 yards.More items...
What number club is a driver?
1-woodThe most common set of men's clubs is: A driver, usually numbered a 1-wood regardless of actual loft, which varies from 8° up to 13° A fairway wood, typically numbered a 3-wood and lofted about 15° (though 2- and 4-woods are sometimes seen)
What do the letters on a golf shaft mean?
Golf shafts are designated with a letter code, the letters most commonly being X, S, R, A, and L . What do these letters represent? Those letters tell golfers flex—the relative stiffness—of that shaft.
What happens if you mismatch your golf shaft?
If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.
What does it mean when a golfer's swing is slower?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.
Why is senior flex represented by an A or M?
Why is senior flex represented by an A or M? " A" originally stood for "amateur." The "M" stands for "mature" or "medium." Also, of course, "S" is taken by "stiff."
Why do golf shafts bend?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.
What does Honma golf mean?
HONMA Golf – What do the 2, 3, 4 and 5-Stars of the HONMA clubs mean? March 30, 2020 – HONMA Golf is more than a golf club manufacturer. It is the creator of the most beautiful and elegantly designed clubheads in golf, and of shafts brimming with innovation and technology at the service of the golfer. A brand whose equipment always inspires luxury, ...
Why do Honma golf clubs reject?
With such a demand for perfection during manufacturing, rejects can occur because, for example, a shaft doesn’t meet the brand’s high quality standards. The higher the number of stars, the higher these requirements for consistency and quality will be, and consequently, there will be more discards in the course of creating perfect golf clubs for the player.
What are Honma 2 star clubs?
HONMA Golf – BERES 2-Stars. The 2-Stars represent the entry category, which is the standard of the Japanese brand. But in no way does this mean the 2-Star clubs are inferior. Quite the contrary, since the 2-Star BERES are basically extraordinary compared to the rest of the market. The main reason is that HONMA’s own shafts are especially light ...
What is the goal of a Beres golf shaft?
The goal is to offer BERES golfers a high precision shaft, with the appropriate softness and lightness at a slow swing speed, while maintaining a low torque on this type of shaft, which is difficult to achieve. This is because if we want to hit a ball straight and with consistency we need a low torque.
What is a 4 star golf shaft?
The 4-Star ARMRQ shafts feature a higher quality carbon fibre and superior strength, contributing to minimize dispersion and achieve more homogeneous shots. Regarding the finish of the clubheads, gold is used in some of the finishes and in the ferrules that cover the union between the head and the shaft. If a single golf club is already outstanding on its own, the entire set inside a HONMA Golf bag will shine brighter still, even from a distance. The most illustrious is, undoubtedly, the 4-Star driver, but we have to tell you that you can’t top the 5-Star version!
What is Honma's mission?
HONMA ‘s mission is to produce the most refined golf clubs in the world. That is its art, and hence it’s continuous pursuit of perfection. Only the potential BERES player, or the one who has played the previous models, will be able to make the final well-informed decision.
Which is better, Honma or Torayca?
The HONMA 3-Stars are better in terms of shaft quality, as the M40X material of Torayca is incorporated. On the other hand, the 3-Star golf clubs are customizable at the loft, lie and length levels, and the colours of the clubheads and shafts can also be modified.
Which is better, Honma or Honma 3 stars?
Honma 3 stars. Nevertheless, the majority of players go with 3 stars, even if 2 stars are the cheapest entry. 3 stars have the advantage that they are available in much more variants in Europe and that means practically no waiting times even in quite exotic configurations. The 3 star Honmas are a bit better in the quality of the shaft.
Where are Honma 5 star clubs made?
5 star clubs are extremely rare and even we as a long-time Honma dealer have sold very few sets and woods of them. They are definitely unique. Each club is manufactured individually in Japan - the delivery time is correspondingly long. The 5 stars Beres are mostly gold-plated.
Why are Honmas 2 stars Beres so popular?
Already the 2 stars Beres are basically unrivalled. The reason is that Honmas own shafts are particularly light and soft and nevertheless show good torque values. This combination is particularly difficult to realize in production. But this is exactly what makes Honma clubs so well known and popular.
What are the disadvantages of Honma 4 stars?
The disadvantage of 4 and 5 stars is that they are practically all "custom" designs, which means that the club must first be manufactured in the desired configurations individually in Japan. That sounds good, but don't forget the 8-10 weeks delivery time. The Honma 4 star clubs are already made with much more expensive materials like ...
What is the difference between 2 and 3 stars irons?
The difference in the iron heads between 2 and 3 stars is due to a slightly different steel. At least a 3 star iron is very easy to bend and thus to adjust Lie and Loft. With a 2 star iron this is not so easy.
Is Honma 4 star or 5 star?
This club is certainly no longer discreet, no matter which Beres it is. The most conspicuous is certainly the driver of which you can not hide the 5 star version.
Is a 3 star shaft better than a 2 star shaft?
Another fact is that the 3-star shafts are once again a good deal better than 2-stars. Whether this difference will actually save you a lot of strokes off the scorecard is hard to say.
What does the number mean on a golf club?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck. The lower the golf club number, the less loft, the less intense the angle on the golf club face; this means the golf ball will travel more distance at a lower height.
What are the different types of golf clubs?
The three common types of golf clubs are wood, iron and putter. You can find these types of golf clubs at our golf pro shop in South Florida.
What is a wood golf club?
Wood golf clubs are long-range clubs used at the beginning of every hole when you tee off. For longer courses, use wood golf clubs in the second swing. Woods have large, circular club heads with a flat front where you strike the golf ball.
What is the difference between a wood and an iron club?
The difference between a wood and iron club refers to the material the club is made out of. A 3-wood and 3-iron will have the same loft angle, as would a 5-iron and 5-wood, though made of different materials, which means they are better suited for different shots.
Why are putters so easy to remember?
Putter Golf Clubs. Putters are easy to remember because they have short shafts and smaller club heads. You may recognize this club from the last time you played mini-golf, but, hopefully, your putter is much better than those!
Is it hard to learn golf?
Golf can seem a little complicated to newcomers and first-timers, and understandably so. Learning to play golf can be difficult due to its steep learning curve, rules and regulations, and equipment specifications that accompany the game. A common question newcomers to the sport ask is the meaning behind the various golf club numbers. Thankfully, our South Florida golf course experts at Deer Creek Golf Club are here to share some insight into the golf club numbering system. We will break down what the numbers mean and which numbered club you should use for particular shots.
What does Honma want?
What Honma wants is to keep control over the quality. Imagine that Honma sells single heads to clubmakers who mount shafts that don't fit. From the player's point of view, it is rarely the shaft or clubmaker that is to blame, but Honma. The brand would suffer from this and therefore Honma only delivers in one pieces.
Who is the #1 golfer in the world?
The golfing world was amazed when Honma signed the world's #1 player, Justin Rose , at the end of 2018. This move has more than paid off so far and everyone who has followed the tour has heard from Honma and knows that you can win big tournaments with these clubs. As Justin Rose could already prove.
What is a P iron?
The P iron of the Tour World series is a classic two-piece iron that is forged partly from soft steel and can therefore be adapted according ly in terms of lie and loft. It is our most sold iron so far in 2019 and for good reason. Honmas TW747 P irons.
Why is Honma so bearish?
As an investment, I’m bearish on Honma and golf companies in general because the world market for golf equipment isn’t growing in any appreciable manner – and growth is what invites investment.
What is MyGolfSpy showcasing?
This year MyGolfSpy is showcasing a variety of Japanese equipment companies in an effort to familiarize readers with these brands and what each has to offer. In case you missed our coverage of Miura and Vega, take a peek.
What are some examples of golf stores?
As stated, PGA Superstore and Golftown are two examples. Likely, it will be several more.
What was the original callaway?
Let’s get it straight… Original Callaways was like hitting a ball with a 2 x 4. They had 100 plus gram shafts… The Japanese clubs, “back then” were light years (golf equipment years) ahead. You ask how so… the following…
Is the 737P a good golf swing?
If iron play is your weakness, but you have a reasonable swing speed, the 737P is a good option. Even though it’s cast, it’s still plenty soft. What’s more is at around $165/club ($175 for the wedges), the pricing is exceptionally reasonable for this segment of the market.
Is it risky to take a golf equipment company public?
There’s always risk involved in taking a company public. This is particularly true for golf equipment companies who play in a space where the global market is relatively stagnant, if not contracting slightly.
Does Honma use the same materials?
Honma uses the same materials in both locations and provides a staff whose primary focus is quality control. Regardless, it’s an onerous task to be both a premier Japanese equipment company and outsource a percentage of your tour line to China.
Who is the wedge wizard in Honma?
Anything you want, they will get and put it in their clubs. You will have to pay for it, of course, but you are not limited to stock options. Honma has also brought Jacob Sanborn, aka “Wedge Wizard,” a legend in the wedge customization world, on board. He is now making custom stamped and finished wedges.
Where is Honma made?
History. The company was founded back in 1959 by the Honma brothers in Yokohama, Japan. In 1981, the company moved to Sakata, in Yamagata prefecture. The Sakata site is where manufacturing continues today for Honma products.
What is a W4 wedge?
This wedge contains a beautifully-crafted backing that allows the center of gravity to be manipulated to ensure each wedge performs at its best. The stronger lofted wedges feature an I-sole design that allows for better turf interactions on full swing shots and, starting at the 54-degree loft, the wedges feature a C sole to assist with more delicate shots around the green.
What does P stand for in irons?
Now that the P irons (the P stands for Pocket) are forged, I was hoping for a much softer feel. I was amped to give it a try.
Why are tungsten clubs made separately?
The attention to detail in crafting these clubs is top-notch. The way the lines of the club flow into each other highlights the quality of these irons. The face is constructed separately so the engineers can hide tungsten in the toe of the clubs. This moves the center of gravity to the center of the club head and increases stability in the head.
Is the 56 degree wedge good?
I tested out the 56 degree, and this wedge felt as great as it looks. The wedge was tremendous at the half shots and chips, pitches and flops. It had a good amount of spin, and you could stop it where you wanted it to.
Can you afford a honma?
I often ask my customers, “Do you want to try Honma?” The most common responses are: “What is a Honma?”, “Is that the one with a gopher or a mole on it?”, or “I cannot afford those.” Yes, the mole is their logo, and yes, you can afford them. This company often gets overlooked, because people get sticker shock when they see the $4,500 price of a 5-star Beres driver. Come and follow me down the mole hole into the world of Honma.
gocchin
Yeah I wasn't sure about how the star system worked now with the ARMRQ's, thanks for pointing that out for me as I'm not much of a Honma man.
xxio
Interesting Titanium in the Honma ARMRQ but no Titanium in the Beres ARMRQ.
What is the first thing you notice about a fake golf club?
The first thing you will notice about a fake club is the quality doesn’t compare to the real deal. If held side by side with an authentic club, it will be easy to identify the counterfeit golf club because of the inferior quality.
How to identify counterfeit golf clubs?
This section will be dedicated to the differences between the way companies put serial numbers on their clubs and how to help spot counterfeit clubs. Most counterfeit clubs will have a much larger font for the serial numbers than what is on the authentic clubs. Some companies etch the serial numbers into the metal and some companies use a laser that isn’t actually etched into the metal. Every counterfeit club we have seen uses a laser and is not etched into the metal. This could of course change in the future. However, the guide below should help you identify counterfeit golf clubs.
Where is the serial number on a Mizuno iron?
Mizuno iron sets will have the serial number on the hosel of every iron . Mizuno clubs normally have the serial number lasered on, but it will be in small writing. Fake clubs will look like it is lasered on, but the writing will be much larger and a lot of times will only be on one club. This would be the same for Mizuno drivers and fairway woods. For iron international iron sets (Europe/Asia) the serial number is on the shaft underneath the grip.w
Why is the head weight of a counterfeit driver heavier than the head weight of an authentic driver?
Head weight on counterfeit drivers is normally heavier than authentic drivers because they are not made of titanium. You can also try the magnet test on your driver to see if it will stick.
Why is the feel of a putter different?
Feel of the putter will be different because of the material used. Higher end putters like the Scotty Cameron below are made of a softer metal and will have a different feel than the counterfeit.
How to tell if a club is fake?
There are a couple of manufacturers that allow you to register your clubs on their website. Part of the registration is inputting the serial number on the clubs. This is also not a full proof way of determining whether or not a set of clubs is fake or not, as most of those sites will accept any serial number that is enter.
How to tell if a ping club is etched?
Ping clubs will be harder to tell because they have recently started using laser etching on their newer clubs. It used to be that all their serial numbers were actually etched into the metal. It has just been in the last couple of years they have started using the laser etching process. On iron sets, Ping puts the serial number on all clubs. On the newer drivers and fairway woods the serial numbers are on the sole of the club back toward the hosel.