Golf-FAQ.com

what does turnover mean in disc golf

by Elza Shanahan Published 2 years ago Updated 1 year ago
image

A turnover shot is thrown with something more understable so that the disc will carry the turn all the way to the ground. This gives you a big, sweeping left-to-right turn to get around doglegs. They're usually thrown with a lot of air under the disc, so you throw them high and wide.Jun 21, 2016

Full Answer

What is a turnover shot in disc golf?

Turnover shot – Intentionally throwing the disc so it turns in a direction opposite the natural spin tendency. This is most easily achieved with an understable disc and will result in a turning to the right (RHBH).

What does it mean when a disc turns right?

Understable/Turnover The tendency of a disc to turn to the right during the high speed portion of the flight for a RHBH thrower. The faster the disc is thrown, the more it will turn, therefore an understable disc will turnover more upwind than downwind.

How do you know if a disc is turning?

The tendency of a disc to turn to the right during the high speed portion of the flight for a RHBH thrower. The faster the disc is thrown, the more it will turn, therefore an understable disc will turnover more upwind than downwind. The tendency of a disc to turn to the left at high or low speeds for a RHBH thrower.

What are the different types of turnovers in football?

While some turnovers are obvious, such as the disc hitting the ground or being intercepted by an opposing player, some turnovers are more subtle. For example, if you were to step just out of bounds during a game, it could be hard for the other players on the field to see if you were in or out of the line.

image

What does it mean to turn over a disc?

A disc is turned over when it flies against the natural angle of the disc. For example, an RHBH thrower has turned a disc over if it flies to the right when released flat. This differs from an anhyzer because of the angle of release.

How do you throw a turnover shot in disc golf?

0:104:59Tips With Christine - Hyzer Flips, Turnovers, Flex Shots - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it'll just turn keep turning and it's not going to hold straight or come back. And a flex shotMoreAnd it'll just turn keep turning and it's not going to hold straight or come back. And a flex shot is when a stable disc starts to turn to the right but has the stability. To fight back to the left.

What does a turn 1 mean in disc golf?

It's simple – one turns right – the other fades left (for rhbh). Turn mostly decides the stability of the disc, while you're always going to have fade on the end of flight that can also affect stability somewhat.

What is a turn disc in disc golf?

Turn is defined as a disc's tendency to want to go to the right when thrown back hand by a right handed player. For a left handed player throwing back hand, this idea is reversed as a disc will want to turn to the left if the conditions allow it to.

What makes a disc turnover?

No less than six primary factors affect to what degree your disc will (or will not) turn over: angle of release, release point, trajectory, the amount of spin on the disc, the wind, and of course the stability of the disc itself.

Can you hyzer flip a destroyer?

I primarily throw rhbh and I hyzer-flip most all of my shots. My favorites to do this with are Nuke, Pro Katana, and Valkyrie. I just found out that I am able to flip a pro destroyer. That was an awesome feeling.

How do you tell if a disc is over or Understable?

A short cut method for determining whether this disc is over or understable is to add the last two numbers in the flight numbers, in this case: -2+2=0. If the resulting number is positive the disc is said to be overstable.

What speed disc should I throw?

Disc golf throws generally fall into three categories and recommended disc speeds: Putts usually use low speed discs to maximize accuracy. Approaches and midrange shots usually use medium speed discs to balance speed and accuracy. Drives usually use higher speed discs to maximize distance.

What weight discs do pros throw?

Drivers. Drivers start at around 150 grams, but beginners tend to go for something in the range of 165-169 grams because they're easy to get good results with. But it's not so much the case that pros immediately go to the other end of the spectrum and use 175g gram discs because they go further.

How do you use a disc turn?

3:124:42La Esmeralda Turning Disc Instructions and Review! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo basically what you're going to do is just take your turning disc. And place it on the floor. AndMoreSo basically what you're going to do is just take your turning disc. And place it on the floor. And then you want to put your toes. On the turning disc like this.

What is the most Understable disc?

The Mamba is one of the most understable disc golf discs ever made and sports a ridiculous -5 turn rating (turn ranges from 1 to -5, with -5 being the most turn). The Mamba is the best disc on the market for roller shots.

What is hyzer and Anhyzer?

The difference between hyzer and anhyzer is how the disc is released in an angle by the disc golf player. The hyzer throw happens when the top of the disc is facing away from the thrower. The opposite is anhyzer, where the top of the disc will face the thrower upon release.

What is turnover in football?

A turnover occurs when a pass is incomplete. There are several ways this can occur. A pass is considered incomplete if the thrower accidentally drops the disc and cannot regain possession of it before it hits the ground. In this situation, the disc would turnover to the other team because it was dropped. It would not be considered an incomplete ...

What happens if you disagree with a player on a turnover?

If the players disagree on whether a turnover has occurred, they can call a “contest” where they discuss and come to an agreement about what happened during the play. If the players cannot come to an agreement, then they must return the disc to the last non-disputed thrower.

What is a turnover in Ultimate Frisbee?

A turnover is when the possession of the frisbee changes from one team to another.

What is a turnover with stopped play?

A turnover with stopped play also occurs if the thrower intentionally hands the disc to another player instead of throwing it. In order for the pass to be legitimate, the disc needs to leave the hand of one player before reaching the hand of another. If this does not occur, possession of the disc is given to the opposing team.

What happens if you drop a disc in basketball?

Alternatively, if the thrower dropped the disc and it was touched by another player, the thrower would give up possession of the disc even if they caught it after another player touched it. This would not be considered a turnover, but rather would be considered a new possession since it never touched the ground.

What happens when a thrower does not pass the disc in the allotted time limit?

A turnover occurs and play stops if the thrower does not pass the disc in the allotted 10 second time limit.

What is the name of the game where you score points on a rectangular field?

Ultimate Frisbee is played on a rectangular field that has an endzone at each end where points are scored.

What factors affect disc turnover?

No less than six primary factors affect to what degree your disc will (or will not) turn over: angle of release, release point, trajectory, the amount of spin on the disc, the wind, and of course the stability of the disc itself. Each of these can be manipulated – or in the case of the wind, leveraged – to create a desired flight path. More exciting still, they can be mixed together to create every conceivable shot.

How to help a disc turn over?

More than any of the other factors, the proper use of controlled spin to help a disc turn over is the mark of an expert. The stability of a disc is partially determined by how much spin it can handle before it’s natural fade is overcome. Throwing a disc hard and fast like you’d try to do when attempting a long drive is one way to generate lots of spin, but not every shot calls for 100 percent power. A really good player can increase the spin on a disc to manipulate its flight path without overdoing the power.

How is turnover shot determined?

While angle of release is determined by the angle of the nose of the disc when it’s released, trajectory is controlled by the line on which the disc is pulled back and released.

What is the angle of release on a disc?

The angle of release refers to the angle of the nose of the disc as it’s release . It’s the most obvious of all the factors to someone first trying to learn how to throw a turnover shot since it’s fairly logical that if angling the disc to one side results in a hyzer in one direction, then reversing the angle should help it turn in the other direction. Angle of release is the most important factor in throwing an anhyzer shot, which is reversing the angle to get the disc, from the time it leaves the handle, to turn the opposite direction of a hyzer. Hmmm. . . ANgle opposite of a HYZER. Anhyzer . . . if nothing else that’s a good way to remember the correct definition of the word.

What is the angle of release in an anhyzer shot?

Angle of release is the most important factor in throwing an anhyzer shot, which is reversing the angle to get the disc, from the time it leaves the handle, to turn the opposite direction of a hyzer. Hmmm. . . ANgle opposite of a HYZER. Anhyzer . . . if nothing else that’s a good way to remember the correct definition of the word.

How far can you throw a disc golf?

There are two things that separate players who have truly mastered the flight of a golf disc and those who have not: the ability to throw a disc relatively straight for more than 150 feet, and the ability throw what is alternately known as an anhyzer or turnover shot. The two are actually connected as they both require the ability to iron out ...

What does it mean to throw a disc over?

In a nutshell, to turn the disc over means to get it to curve in the direction opposite of that which in naturally wants to curve ( fade). For instance, a right handed backhand shot will naturally fade left (immediately or eventually, depending on the disc), so a player wanting to get the disc to curve right needs to ‘turn it over’. Throwing an anhyzer is simply one of several ways to turn your disc over, all of which we’ll examine in detail.

Why are people more aware of the turn they need on their disc?

They will be more aware of the turn they need on their disc simply because they have a greater frame of reference.

How is a turn rated?

Turn is rated based on its stability at high-speed. The high-speed is the initial part of the throw when the disc is moving at the highest velocity.

How do you choose the right turn rating for you?

It is important to consider two things when considering the right turn for the throw.

What is the difference between an overstable disc and an understable disc?

The difference between the two is that an overstable disc tends to follow a natural arc to the left at high speeds while understable discs have a tendency to turnover in the high-speed section of the flight which causes them to bend to the right before fading to the left at the end of the flight path when it enters the slow speed portion of the flight.

What is the turn in Innova?

Turn is one of the ratings in the Innova Flight Ratings System that describes how much the disc will bank to the right in the beginning of the flight.

Why do new players need to start with an understable disc?

Most new players need to start with an understable disc because the disc naturally starts fading.

What rating discs are good for roller shots?

Discs that have a -3 or a -5 rating will be perfect for roller shots.

image

Possession of The Disc Is Transferred

  • A turnover occurs when a pass is incomplete. There are several ways this can occur. A pass is considered incomplete if the thrower accidentally drops the disc and cannot regain possession of it before it hits the ground. In this situation, the disc would turnover to the other team because it was dropped. It would not be considered an incomplete pas...
See more on discgolfwarrior.com

Possession of The Disc Is transferred, and Play Is Stopped

  • A turnover occurs and play stops if the thrower does not pass the disc in the allotted 10 second time limit. While the thrower is looking for someone to pass to, a player on the defensive team counts the seconds out loud to mark how long the thrower has been in possession of the disc. If the defensive player reaches 10, game play is stopped, and the defensive team receives posses…
See more on discgolfwarrior.com

“Spirit of The Game”

  • As you can see, there are many different ways that a turnover can occur during a game of Ultimate Frisbee. An interesting thing to note, though, is that these turnover calls are not made by a referee, but by the players themselves. That’s right! There are no referees in Ultimate Frisbee! Ultimate Frisbee Is known for something referred to as the “spirit of the game” (SOG), which encourages …
See more on discgolfwarrior.com

Angle of Release and Release Point

Image
The angle of release refers to the angle of the nose of the disc as it’s release. It’s the most obvious of all the factors to someone first trying to learn how to throw a turnover shot since it’s fairly logical that if angling the disc to one side results in a hyzer in one direction, then reversing the angle should help it turn in the other dire…
See more on allthingsdiscgolf.com

Trajectory

  • While angle of release is determined by the angle of the nose of the disc when it’s released, trajectory is controlled by the line on which the disc is pulled back and released. When a disc is pulled back and throw on a line parallel to the ground, the trajectory should be relatively flat. If the trajectory is angled upward, that is of course the direction the disc will go. Trajectory is especiall…
See more on allthingsdiscgolf.com

Spin

  • More than any of the other factors, the proper use of controlled spin to help a disc turn over is the mark of an expert. The stability of a disc is partially determined by how much spin it can handle before it’s natural fade is overcome. Throwing a disc hard and fast like you’d try to do when attempting a long drive is one way to generate lots of spin, but not every shot calls for 100 perce…
See more on allthingsdiscgolf.com

Wind

  • You likely have heard or figured out that throwing into a headwind will turn a disc over/make a disc less stable, while a tailwind does the opposite. Very true. Wind is the one factor the player doesn’t control, but it has a big impact on the flight of a disc. When the wind is extreme, it’s the starting point for selecting a disc and flight strategy. When it’s more gentle, the wind is simply a fact tha…
See more on allthingsdiscgolf.com

Disc Type and Stability

  • Back when I started playing a couple decades ago, the best advice I heard from the best players was this simple nugget: Pick a good all-purpose disc (back then that meant a Roc) and play with just that disc. Master that disc before throwing anything else. The wisdom there is that by learning with only that one disc, the player has no choice but to coax every shot out of that disc. I think th…
See more on allthingsdiscgolf.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9