Golf-FAQ.com

what length of golf clubs should i be using

by Armando Jenkins Published 2 years ago Updated 1 year ago
image

Based solely on the overall height, here’s the golf club length chart:

OVERALL HEIGHT GOLF CLUB LENGTH ADJUSTMENTS
under 4’10” minus 2″
4’10” to 5″ minus 1-1/2″
5’0″ to 5’2″ minus 1″
5’2″ to 5’4″ minus 1/2″
Jul 11 2022

1. Measure Your Overall Height (i.e. “static” fitting)
OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS
5'4″ to 5'7″minus 1/4″
5'7″ to 6'1″standard length in inches
6'1″ to 6'2″plus 1/4″
6'2″ to 6'4″plus 1/2″
7 more rows

Full Answer

What are the top ten golf clubs?

Best Distance Iron Set Under $900: TaylorMade SIM MAX Irons, 5-PW; Best Forged Irons: Callaway Apex 19 Irons, 4-PW; Best Budget Set for Women: Aspire XD1 Women's Golf Clubs Complete Set; Best Complete Budget Set for Men: Wilson Golf Profile Platinum Complete Package Set; Best Junior Set: Wilson Youth Profile JGI Golf Set; Best Classic Irons: Mizuno MP-20 MB Irons, 3-PW

What is the standard length for a golf club?

What Is the Standard Length of a Golf Club?

  • Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
  • Graphite Vs. Steel. ...
  • Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
  • Irons and Hybrids. ...

What is the minimum golf clubs needed?

Minimum number of golf clubs needed to play decently. Had a couple of friends suggest that I take up golf so I can play with them. As a minimalist, I find the idea of 14 clubs excessive. As a total non-golfer, I’m guessing 4: 1 wood; 1 Iron; 1 sand wedge; and 1. Putter.

How to shorten the length of a golf club?

To do that, the DIY golfer will have to:

  • Remove the existing grip.
  • With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
  • Re-install a grip on the newly shortened shaft.
  • And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...

image

How long should golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How do you determine the proper length of a golf club?

To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.

How do I know if my irons are too long?

Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.

How do you know if your golf clubs are too short?

6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.

How do you measure your wrist and floor for golf clubs?

Stand on a solid, flat floor with your wrists hanging in a relaxed fashion by your sides. Wear street shoes without heels. From this position get someone else to take a measurement from the floor up to the crease on the inside of your wrist. This is the excepted, correct method for how to measure wrist to floor.

How long should my 3 wood be for my height?

These measurements are often considered to be the standard lengths for the 3 wood golf clubs. Most players are comfortable playing their 3 woods with a length ranging between 42.5 inches and 43 inches. However, some golfers prefer a slightly shorter length of 42 inches for their 3 wood.

What is the standard length for a 7 iron?

The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.

What length should my driver be?

The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.

What does it mean to use the correct size golf club?

When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.

Why is it important to choose the right golf club size?

These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.

Why is it important to know the size of your golf clubs?

This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.

Why are golf clubs so complex?

The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.

How to make your golf swing more efficient?

To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.

Who invented single length irons?

Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.

What Length Irons Should I Use?

As a rough rule of thumb, you can fit irons using this height chart below...

What Length Driver Should I Use?

With drivers, the shaft length you choose will affect the amount of clubhead speed you can create vs the amount of control you have.

What Length Putter Should I Use?

With putters, the shaft length you need is the one that helps get your eyes directly over the ball at address. While in theory this means taller golfers need longer putters and shorter golfers need shorter putters, different postures mean this doesn't ring true for everyone.

How long should a golf club be?

The most common method used to recommend the length of a golf club is a "height-based" chart. Golf clubs are usually available in two primary lengths (excluding juniors) and somewhat based on statistics, like the average height of an average male and female. The average woman’s height in the U.S. is approximately 5’ 5” (165.1cm), with about 68% between 5' 2" and 5' 7". The average male is approximately 5' 10" (177.8cm) with nearly 68% between 5' 6" and 5' 11". The difference between the finished stock men’s and women’s clubs is usually 1" difference in the length.

How tall is a 5'10 golfer?

In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.

What is the average lie angle for a 5 iron?

A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.

Does a 1" increase in length make a golf club longer?

For taller individuals, it is logical to assume longer clubs are recommended. But it should be noted that a 1" increase in club length does not necessarily make the club 1" longer from the floor to the ground. It is the sin of the lie angle that is the length component in the vertical direction.

Can a man buy jeans based on height?

For example, a man does not purchase jeans based upon their height, rather two important pieces of information. If that person knows what their waist and inseam measurements are, they can purchase a pair of jeans that will most likely fit (but not always) without having to try them on.

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

What happens if a golfer has a short club?

If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

Why is playing with clubs too short bad?

Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.

What is the most important factor in creating distance with the driver?

However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.

Why are golf clubs not fitting?

Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.

Does a longer shaft mean faster club head speed?

A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.

How to get the right shaft length for golf clubs?

Go to a club fitter to get the right shaft length for you and ensure your clubs, especially your irons, have the correct lie angle for you. When you are still learning the game of golf or continuing to improve, then expect to change your clubs as your handicap drops.

How long is a golf club shaft?

The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style.

What is the angle of a golf iron?

The lie angle is the angle between the shaft and the ground as measured when you are in a normal playing position with the sole of the club on the ground . These lie angles vary from club to club and from manufacturer to manufacturer, lie angles are about fifty-three to fifty-six degrees in drivers, about sixty-five degrees in the short irons and over seventy degrees in a putter; which is best for you will be partially dependent upon your height and the relative length of your arms. What you are looking for is a club which when you hold naturally has its sole flush to the ground. If you find you have to change your posture to make this happen, then adjusting the lie angle of your club may help.

What happens if your putter is too short?

If your putter is too short, you will get too close to the ball, and this can mean the heel of your putter lifts off the ground, and you will not hit the ball well. The shaft length on your putter should enable you to get your eyes directly over the ball just before you take your shot.

How many inches to add to standard length?

Between 6 feet 6 inches and 6 feet 9 inches – Add one and a half inches to the standard length.

How long is a standard length?

Between 5 feet 9 inches and 6 feet – You will be suited to a standard Length. Between 5 feet 6 inches and 5 feet 9 inches – Subtract half an inch from the standard length. Between 5 feet 3 inches and 5 feet 6inches – Subtract one inch from the standard length.

What happens if you put too long on a putter?

If a putter is too long, you will compensate by standing too far back from the ball, which will spoil your eye contact. It is also probable that you will push your elbows to your side, and this will mean you will not be able to make the natural pendulum move which good putting entails.

Is the length of a putter a factor?

The length of putter can have a big impact on both control and accuracy, but the selection of putter length is not just dependent on the golfer’s height. Depending on the golfer’s experience, it may be necessary to accommodate the golfer’s style of putting in to the measurement, as technique is a huge factor when it comes to making the decision ...

Does size matter in golf?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.

How many inches to a standard length golf club?

Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.

How to tell if a golf club is too long?

Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.

How long is a standard iron club?

Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.

How long is a golf driver?

On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

How long is a three wood putter?

Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.

Do beginners need to size their golf clubs?

These are questions many newbies have but don’t know the answer to. Beginners usually struggle with sizing their golf clubs correctly. Unfortunately, when it comes to clubs, size is very important. In fact, the right size of clubs can significantly improve your game, while the wrong size of clubs can negatively impact your performance, ...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9