Why do I push my putts?
The two most common causes of pushed putts, both with obvious cures: Standing too far from the ball: Very simply, you'll take the putter back too far inside the target line and return it on the same path, with the putter head moving out (right of the hole) toward the ball.
Why do golf clubs have to be soled at address?
The golfer wants to make sure the ball doesn’t move when he is going to hit it. If the golf club is soled at the address, this allows for movement from the ball (if it is not on a tee). Not soling the driver at address will also ensure that the upward strike to the ball is achieved.
What happens if the wind is behind the golfer?
If the wind is coming from behind the golfer, it could make the swing too much, and the golf ball could end up behind where the golfer wanted it. Using the wind to the golfer’s advantage is possible. The golfer can determine where the wind is blowing and how hard.
Should you put your driver on the ground when playing golf?
That is ideal for a good shot on the golf course. When the driver is rested on the ground or not in the right area, the golfer could shoot the ball more unevenly, which would allow for more spin to the golf ball. The suggestion is to never sole the driver at the address.
What causes pitting on golf clubs?
One thing to look out for on shafts is pitting. Pitting corrosion, or pitting, is a form of extremely localized corrosion that leads to the creation of small holes in metal. In golf pitting will occur on steel shafts where the protective chrome layer has been attacked by the corrosion.
How do you get rid of pitting on golf clubs?
0:432:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get ridMoreBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
What causes a golf club to snap?
When stronger players take up the game of golf, they need stronger heavier steel that is quite stiff. Without this type of material, the clubs can snap. Club heads will also just fly right off because the strength of the club does not match the player's strength.
How do I stop my golf shafts from rusting?
To prevent rust from happening again, you should make sure your golf club shafts always stay dry. People think about cleaning club heads and grips, but they don't pay much attention to the shafts. If water sits on the shaft, it will eventually start to rust it.
Can you use WD40 to clean golf clubs?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
Can you Regroove clubs?
1:012:52How to Regroove your Irons with the 6 Head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom isMoreAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom is to go just draw it backwards but it really doesn't matter work your way up.
How do I stop my golf clubs from breaking?
Clubs are not designed to make contact with the ground. Making fat shots repeatedly can cause the head to break apart from the shaft. In some cases, the shaft can break completely in half. Solution: While in your stance, make sure the ball is not placed too far forward.
Do golf clubs go dead?
Golf irons will go dead and wear out over time as their grooves and clubface deteriorate from repeated use. Golf technology is always rapidly changing, meaning irons that are older than five years of age are likely outdated and won't perform as well as the latest models.
Why did my club head break off?
Lifespan. Unfortunately, golf clubs have a life span just like a car. If a set of clubs is older than 10 years old, expect deterioration like broken shafts, heads coming off and grips unraveling. Although the lifespan can be extended by taking care of the clubs, anything beyond 10 years is likely to give problems.
Will Coke remove rust from golf clubs?
Pour the Coke into the bottom of the bucket on the club heads. When the Coke settles down, you will want it to soak for several hours. Letting the golf clubs soak for at least four hours or so will give the Coke time to work cleaning the rust off the clubs without you having to scrub them.
Does rust affect golf clubs?
Made famous by Cobra's Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
Does vinegar dissolve rust?
For more stubborn rust, try using white vinegar. The acetic acid in this common household product is acidic enough to dissolve rust. You can soak smaller things like earrings, wipe it onto a surface with an old cloth, or just pour it directly over rust spots or bolts and screws that have rusted together.
What is the shaft of a golf club?
The Shaft is the Engine of the Golf Club. Actually, you the golfer are the engine, the shaft acts more like the transmission. The weight of the shaft is a key element in the fitting and performance of golf clubs for ALL golfers. The overall stiffness design (aka the flex and bend profile) is an element of golf clubs that becomes progressively more ...
Why is my golf ball flying higher?
If a golfer is properly fit so his shafts are not too stiff or too flexible for his clubhead speed, transition force, downswing tempo and point of release and he truly does exhibit a higher ballooning ball flight, then the predominant reason is because of a swing error that causes the dynamic loft on the clubhead to be too high for the golfer’s club head speed and angle of attack. The only way a shaft can reduce shot height and spin is to fit the golfer into a substantially stiffer shaft or significantly more tip stiff bend profile. That only can have an effect for golfers with a later-to-very-late release and brings with it the risk of the shaft being much too stiff for the golfer, which in turn can rob the golfer of distance and cause the feeling of impact to be less solid.
Why are low handicap golfers less wowed by fittings?
The reason low handicap golfers tend to be less “wowed” by a fitting is because as a better player, they have over the years already found clubs that fit their more consistent swing characteristics reasonably well. Better players can and do fit themselves with great success.
What is a better shaft for one player?
What is a “better” performing shaft for one player can be a poorly performing shaft for other players, and vice versa, simply because shaft performance is totally about matching the weight, full length stiffness, torque and weight distribution to the swing characteristics and preference for feel of each individual golfer.
What is a tour grind sole?
If we define a “tour grind sole” as a pronounced sole radius in the direction from face to back across the surface of the sole combined with rounding the leading edge at the bottom of the face, such a sole shape is good for ALL players, whether from nationally ranked all the way to a beginner. It actually can be said that such a “tour grind” sole shape is actually more important for a less skilled player to have than a very good player.
How many fittings are there for a full swing club?
With the full swing clubs, there are no less than 12 key fitting specifications that all have to be carefully and often painstakingly analyzed and matched to each golfer’s combination of size, strength, athletic ability and swing characteristics. With putters, there are six.
Do golfers make errors?
Yes, no question, average-to-less-skilled golfers make definite swing errors and do demonstrate a higher level of inconsistency in their swings. But they get the ball airborne more than 98 percent of the time and their misses tend to be more in one direction than the other.
What is golf sand made of?
Golf course sands are different. They are made of round particles “resembling a bucket of balls with large pore spaces between each ball ,” Kidd says. They promote good drainage, and healthy air and water circulation.
Why is sanding greens important?
The green might get spongy, or develop brown spots, or become vulnerable to scalping during mowing. Sanding helps protect against all that. That’s not all, Kidd says. Sanding also improves drainage and helps level out the green, creating smooth, consistent putting surfaces, and firm, fast conditions year round.
Why do you aerate greens?
Aeration comes in when soils are heavily compacted or the turf is thick with thatch. The greens get punched and sanded, and the sand is worked into each aeration hole to improve air and water flow, giving the roots a better chance to drink and breathe. There is, of course, plenty more to the science of sanding.
Do superintendents sand putting surfaces?
Superintendents don’t sand putting surfaces simply to annoy you. They do it for the long-term health of the greens. That’s the gist. But since you’ve been inconvenienced, you deserve to know precisely why.
Does sanding help with thatch?
For starters, Kidd says, sanding helps break up thatch, a layer of organic material that builds up over time in the upper root zone. Too much of that stuff is not a good thing. If levels of thatch exceed roughly a half-inch, Kidd says, “the greens will suffer during extremes of drought and wet periods.”.
Why do I push my putts?
The two most common causes of pushed putts, both with obvious cures: Standing too far from the ball: Very simply, you'll take the putter back too far inside the target line and return it on the same path, with the putter head moving out (right of the hole) toward the ball.
What is the importance of keeping your head down in golf?
Although it is one of the first things that you learn as a golfer, keeping your head down is a fundamental that you cant afford to forget about no matter how long you play. Long backstroke. There are a number of problems that can be caused by a backstroke that is too long, and pushing your putts is one of them.
How to get putter lined up correctly?
Following is a step-by-step process that you can use to get your putter lined up correctly prior to each stroke. Start behind the ball. Each putt should begin with you standing behind the ball looking at the target line. Remember, the target line does not necessarily mean a line that runs directly to the hole.
How to keep your head down in golf?
A great way to practice keeping your head down is to hit a series of short putts while only listening for the ball to drop into the cup. Set up five golf balls at approximately five feet away from a hole on the putting green. Try to find a putt without very much break in either direction.
How to straighten out a golf putt?
If your stroke is out of whack, try the “two-ball drill” to straighten it out: Place two golf balls 4-6 inches apart, on either side of the line of a straight putt and a foot in front of your ball. Stroke the putt directly between the two balls. If youre pushing putts into or close to the ball on the right, you'll learn to adjust as needed ...
What happens if you miss a few putts?
If you miss just a few putts to the right of the hole, you might start to worry about that miss and your future putting strokes could be affected by that fear. Only when you are able to bring together quality technique with the proper mindset for putting can you expect to see the ball fall in the hole regularly.
Which arm is responsible for a push putt?
The right arm is really the part of your body that will allow the putter to release through the hitting area, so using it alone for a few putts should help you to feel that sensation. Most of the time, it is the left hand that is guilty of causing the pushed putt – so take it out of the equation for the time being.
What happens when a golfer rests his golf club on the ground?
Pro Golfer, Jack Nicklaus, has stated that when his driver or golf club is rested on the ground that his arms and grip are too relaxed. That would make for a poor drive from the golfer’s swing. A poor drive from the swing will guarantee that the ball spin will be out of control.
Why does my golf ball have a low arc?
The downward action or topping can make the ball have a low arc behind the ball, which can cause the golf ball to go a shorter distance and have too much spin. If the golfer hits the ball with a “flat swing” or straight trajectory, the ball will have a similar issue.
How to correct uncontrollable spin in golf?
Another way to correct the uncontrollable spin from the golf ball would be to make sure your aim is on the right part of the golf ball. The goal is to aim for the ball right in the center or a little bit above, which seems like it would make complete sense.
What happens if the golf ball is out of control?
If the golf ball is out of control, it is more likely that the golf ball will end up in the woods or too short of the hole.
What is the spin rate of a golf ball when hit on a higher tee?
If the ball is hit on a higher tee, the spin rate will be decreased to 3,000 RPM or less. That is ideal for a good shot on the golf course.
Why is the tee higher?
The higher tee will make an ideal angle for the ball to be hit in an upward motion.
Why is golf considered relaxing?
Golf is said to be relaxing for some while stressful for others. It would be important to be able to play the game and enjoy it, so why not learn how to stop your golf ball from spinning too much.
Why does my hand hurt after playing golf?
Hand Injuries. A bad grip often contributes to hand pain after golf. Gripping the club too tightly or in the wrong way can result in injury. One hand injury we see in golfers is a fracture of the hook of the hamate. The hook of the hamate is a bone in your wrist. It can be broken when your club strikes the gound hard.
How to get your arms to be stronger while golfing?
Since golfing puts so much strain on your arms, being in shape matters. If you’re going to be golfing often, stretching and strength training for your arms are a good idea.
Why does my wrist hurt after golfing?
If you’ve been noticing a gradual increase in wrist pain after golfing, it may be tendinitis. Wrist tendinitis comes with overuse or poor form. Stress from swinging the club causes tiny tears in your wrist tendons. Those tendons get inflamed and cause pain.
What is it called when your shoulder is pinched?
Poor mechanics can result in a condition called “shoulder impingement. ”. This happens when your tendons are being pinched between the bones in your shoulder. Impingement leads to tendinitis, which can lead to a tear. And then you’re looking at surgery.
What is golfer elbow?
That’s right – we’re talking about Golfer’s Elbow. Golfers Elbow is a condition that comes from the strain of repetitive motion. You may have Golfer’s Elbow if you have forearm and elbow pain after golfing.
How to treat golfer's elbow?
Occupational therapy. We often treat Golfer’s Elbow with occupational therapy. With stretching and exercise, a therapist can reduce your pain and speed up recovery. Doctors sometimes recommend physical therapy for golfers depending on their injury.
What percentage of golf injuries involve elbow, wrist, and shoulder?
64% of golf injuries involve the elbow, hands, wrists and shoulder. Are you feeling pain after golfing? This post will cover some of the most common golf injuries, why they happen, and how they're treated.
How to avoid injury in golf?
HOW TO AVOID INJURY: Players who don't turn well in the backswing tend to pin the left arm across the chest ( above, 1). Turning the upper body can be physically challenging for some golfers; others find it just plain scary, because they feel as if they won't get back to hit the ball.
What happens when you swing a golf shot?
WHAT HAPPENS: A strained lower back is the most common golf injury, and the one most likely to shorten a career. The modern power swing is all about the rotation of the pelvis through the shot. The torque this creates between the pelvis and the lumbar spine pulls the ligaments, tendons and muscles in that area. Also, the shearing effect can wear away the discs between the vertebrae in the lumbar spine, leading to disc disease; that's the real career-ender. — Andrews
What is a labral tear in golf?
But labral tears (torn cartilage) are becoming common and often can be traced to the backswing. When golfers keep the left arm tight to the chest as they swing back, they can tear the labrum that stabilizes the shoulder joint. This is called a posterior labral tear, and the golfer feels pain in the back of the shoulder. — Andrews
What happens when you lock your knee in golf?
Many golfers square the left foot and lock the knee in an internally rotated position (right, 1), which leads to an increased shearing force on the knee joint. The typical injury is to the medial meniscus and can lead to degeneration of the articular cartilage and arthritis. — Andrews.
Can you play golf without a lower back injury?
The problem is, many golfers can't do that without a lower-back injury. Instead, try to turn everything in unison; the hips and shoulders should rotate back together and through together (2). You might sacrifice some power, but you'll save your back and stay in the game. — Johnson.
Feedback
One of my putter shafts has some pitting on it, and I want to get it the heck off! How should I go about doing this???
Feedback
I would just replace it with a new shaft. Most .370 iron shafts will fit a putter, depending on how the hosel is configured. A slight amount of heat until the epoxy loosens and you pull the old shaft and reshaft with a new iron shaft. If you need a special, bent shaft there should be some available through MALTBY or GOLFWORKS. Hope this helps.
Feedback
You might want to understand where the rust is starting from - from the outside or the inside.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
