A Club Car golf cart will not move if power from the battery pack is not reaching the motor. Faulty parts such as the solenoid, OBC and wiring can also cause a golf cart to not move. You must check your battery pack thoroughly. A 36V battery must show 38.3V on a full charge, while e a 48V battery reading must be 50.3V.
Why won’t my club car golf cart move?
A Club Car golf cart will not move if power from the battery pack is not reaching the motor. Faulty parts such as the solenoid, OBC and wiring can also cause a golf cart to not move. There are several reasons why your club car won’t move: Batteries; in a pack of 3 or 4 batteries even if one fails, the required power won’t reach the motor
Why won’t my golf cart battery charge?
If you own a 48-volt Club Car, sometimes your golf cart itself can get in the way of a proper charge. If your batteries are carrying a minimal load, and your charger will still not charge them, it may be because your golf cart’s onboard computer is confused about how much charge they are currently carrying.
What are the most common issues with electric golf carts?
Learn about some of the more common issues associated with electric golf carts. 1. Solenoid Wear The solenoid is the primary electrical switch in your golf cart and is designed to ensure the current from the battery flows into the motor.
Why is my golf cart stalling when I turn it on?
A faulty controller can stall the cart and the click you hear must be from the solenoid. Test the solenoid to see if it is functioning properly. You will require a multimeter, preferably a digital one, or a DVM for this. You must first disconnect the cables connecting the solenoid at the larger posts.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
How do you fix a golf cart that won't move?
The problem could be with either the Run/Tow switch or Forward/Reverse switch or both. Check the switches to ensure that they aren't stuck midway. If they are, getting them released should help. However, if they show signs of wear and tear, you must get them replaced.
Why does my golf cart click but not move?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
What would cause a golf cart not to run?
As the main source of power to your electric golf cart, the batteries are commonly the cause for why your electric golf cart won't start. Acid-based batteries are typically used for electric golf carts and must be recharged in order to work properly.
How do you test a 48 volt golf cart motor?
2:5915:0248 Volt Club Car Diagnostics - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow this will also give us light even if it's not at 4-4 or reverse it's in neutral it gets light asMoreNow this will also give us light even if it's not at 4-4 or reverse it's in neutral it gets light as well to make sure this micro switch is working put it in forward or reverse probe.
Where is the reset button on golf cart motor?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
How do I know if my electric golf cart solenoid is bad?
Press on the accelerator while the key is turned on and the cart is in forward.The solenoid needs to be replaced IF the voltmeter shows a full battery voltage without a click.If your voltmeter stays at 0, the problem stems from somewhere else in your cart.
How do I know if my golf cart controller is bad?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
How do you diagnose a golf cart problem?
There are a few simple problems that you can fix yourself that will not necessitate professional maintenance.Test the wall socket where you charge your cart. ... Expose your golf cart batteries. ... Test the batteries for voltage. ... Replace dead batteries. ... Expose the motor for inspection. ... Reset the motor. ... Test the cart.
How do I know if my electric golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won't start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
How do you test a golf cart controller?
The simplest test to ascertain your golf cart controller's performance is to to watch whether it runs when the batteries are fully charged with a slight push of the pedal. If you hear a distinct clicking noise, then your golf cart is running correctly.
Why is my golf cart making a clicking noise?
Golf Cart Making Clicking Noise Typically, a clicking noise on a golf cart suggests that wheels drums may be touching the sides of the vehicle. You may also hear a click sound if your car has lost any bolts that are wiggling in place as you ride your cart.
Why is my golf cart solenoid clicking?
Solenoid Cable and Coil Damage Issues As we mentioned previously, the solenoid is often the most common cause of a click in a Club Car golf cart. It's not necessarily that their solenoids are less durable or reliable than those of other manufacturers, as such.
How do I test a golf cart solenoid?
Turn on the engine of the cart and press the pedal downwards. If you hear a clicking sound, then it means that the low side voltage is working. But, if there is no such sound, it means that either there is no low side voltage or there is a problem with the solenoid. Use a voltmeter and engage the solenoid.
How do you test the speed controller on a EZ Go golf cart?
Connect the negative probe to the controller's M terminal and positive probe to the B+ terminal. Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery. If the motor is not turning, the problem may be in the directional switch or motor.
Why won't my golf cart move?
A Club Car golf cart will not move if power from the battery pack is not reaching the motor. Faulty parts such as the solenoid, OBC and wiring can also cause a golf cart to not move.
How to know if a cart won't move?
When the cart won’t move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.
How to check if a controller is corroded?
To check the controller, these are the steps: You will need a digital voltmeter (DVM) to check the 16-pin connector at the controller. Lift one wheel of the cart on a jack. The black probe from the DVM should be on the pack negative post.
How many batteries are in a golf cart?
Batteries: Some golf cart batteries are designed and structured in such a way that in a pack containing six batteries, #1, #2 and #3 will service the forward movement of the cart and #4, #5, #6 take over when the cart is reversed. So, if one of the batteries were to fail then the movement in that direction will be curtailed.
What happens if one of the batteries fails?
So, if one of the batteries were to fail then the movement in that direction will be curtailed. Checking individual batteries is very important to avoid such a situation. Controller: The design and functioning of the controller are similarly divided into forward and reverse movements of the golf cart.
What to do if you don't get readings on golf cart?
If you are not getting these readings, change your batteries. You must keep in mind that there are differences between the various models of golf carts. Each model may have a different component and you have to be careful while handling them. Wrong handling can cause problems and the golf cart can get damaged.
Where is the Delphi fuse holder on a 2010 Club Car?
For this, the first place you must check is the main fuse. In the 2010 Club Car Precedent, the Delphi fuse holder is located near the solenoid. There are standard operating procedures to be followed while working on your golf cart. The Run/Tow switch must be on Tow and preferably you should disconnect the batteries.
Club Car Precedent 48v Intermittent Problem Question
I have a 2012 Club Car Precedent 48v electric cart that will suddenly stop working. It has brand new batteries, and seems fine, but randomly will not move when pushing the pedal. It will lurch forward then stop again, or it may work normal after changing the f/r switch, key switch, or even the run/tow switch.
Answer
It sounds like you are dealing with what we classify an intermittent problem. So, first things first, we need to reproduce the problem. Most likely, you are dealing with a connectivity issue. Essentially, what you are describing is a power outage to the system. The clicking noise you are hearing is the solenoid disengaging due to lack of power.
Why won't my golf cart start?
Like any other electric vehicle, the batteries are mainly at the root of why your cart won't start. After all, they are the primary source of power for your electric golf cart. If your cart is not working, this is the first place to check. Generally, lead acid-based batteries are used for electric golf carts, and you must recharge them regularly so that they function correctly.
What is a direction switch on a golf cart?
The direction switch or forward/reverse switch controls whether the golf cart moves forward or backward. This switch is one of the most used parts in a golf cart, which means it will be subject to wear and tear. You'll find what the issue is if the switch is acting up. There is a big chance that it will need to be replaced. Again, it's best to choose a mechanic for repair.
Why do electric golf carts fail?
These carts can start to show signs of wear and may fail just like any other vehicle over time.
What are the problems with electric golf carts?
These carts can start to show signs of wear and may fail just like any other vehicle over time. Learn about some of the more common issues associated with electric golf carts. 1. Solenoid Wear. The solenoid is the primary electrical switch in your golf cart and is designed to ensure the current from the battery flows into the motor. ...
What is the controller on a golf cart?
An electric golf carts' controller is known as the heart of the operation and closely resembles and operates much like the motherboard in a computer. So a problem with the controller will have rippling effects throughout the cart. A common function of the speed controller is to control the speed of the golf cart.
Why does my gas cart not work?
When you press down on the gas pedal and hear a tapping-like sound, this is the sound of the solenoid activating. When there is a disruption in the flow of the electrical current , your cart will not operate. A common reason for current disruption is solenoid wear.
What happens if your cart doesn't move?
If the cart doesn't move in either direction, both switches have failed. Diagnosing a problem with the direction switches isn't a complicated matter, but repairing the switch is more complex, especially if the switches are built into the speed controller.
Why won't my sped controller accelerate?
Problems with the sped controller occur for a variety of reasons, but most often the cause is degradation due to age or lack of use.
How does a solenoid work?
Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate. Over time, the force of this pressure creates tiny electric arcs on the plates' surface. These arcs eventually create a resistance that prevents the current from properly flowing.
Why is my golf cart not charging?
If your batteries are carrying a minimal load, and your charger will still not charge them, it may be because your golf cart’s onboard computer is confused about how much charge they are currently carrying.
How to troubleshoot a golf cart battery charger?
If your batteries get too low, you could be stranded. To avoid this, you have to ensure that your battery charger is working correctly. If your battery charger ever fails, ...
Why does my charger fail?
If your batteries aren’t hooked up correctly, or the connections between them are weak or frayed, this can quickly lead to a loss of power and cause your charger to fail. Make sure you check each battery terminal for corrosion; any buildup will impede the flow of electricity, and could likewise cause problems.
How many volts does a battery charger need to charge?
When your charger can’t tell that your batteries are hooked up, it often won’t even turn on. A base charge of 25-30 volts is usually sufficient to wake up your charger and begin charging. To get around this problem, specific chargers offer modes that keep your batteries charged even when you’re not using them.
What to do if battery charger fails?
You can’t address every problem with a simple DIY repair, but a sound diagnosis can save hours of frustration. In many cases, the solution is simple, and you’ll be able to handle it with minimal expense.
Why won't my battery turn on?
Make Sure the Batteries have Some Charge. In the scenario that it doesn’t turn on, it might mean you waited too long to recharge them, and now the charge that they currently carry is too low for the charger to detect them. When your charger can’t tell that your batteries are hooked up, it often won’t even turn on.
What to do if battery is stuck at no charge?
However, if you’re stuck at no charge, a small, manual charger should provide each battery with enough juice to activate your regular charger.
