- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
How do you spin dye disc golf discs?
If someone wants to spin dye disc golf discs, you will need spinning equipment to make a design. Arguably, this is the method the produces the most complicated and unique disc golf dye designs. But you need to familiarize yourself with the process and learn the skill. The process is similar to the shaving cream dye but uses a different medium.
What kind of paper should I use to dye a golf disc?
Vinyl paper: we recommend using Oracal 651; however, if you are getting started with disc dyeing, you can go with Oracal 631, as it is thicker and lenient on mistakes. It can be easily availed from a sign shop Acetone for removing the stamps and prints off of the stock golf disc. It is advised to use acetone in a well-ventilated area
Can You dye discs?
If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, or you can dye your disc using multiple colors.
What is the best worm dye for disc golf?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
How do you dye a disc golf disc at home?
One solution is to use a submersion dye where you simply mix water and iDye Poly, heat the solution and submerge your disc. The advantage here is that there is no acetone involved so you often don't experience bleeding under the stencil. I've had moderate success with this method by submerging my disc for 2-3 minutes.
What kind of dye do you use for disc golf?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
What can you use to dye discs?
13:3528:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipYou can use a plate works out well for most discs but if it's depending on the size that might notMoreYou can use a plate works out well for most discs but if it's depending on the size that might not work like we talked about earlier you can also use like a cheap ultimate frisbee like a dollar store
Can you're dye a disc golf disc?
White discs are best when first starting disc dyeing as they take the color of the dye most easily. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, and the more unpredictable your results will be. Your disc doesn't have to be new.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
How much does it cost to dye a disc?
Pricing: Typical dyes that are seen on Greazy Dyes average a price of $20 per disc, if the disc is provided. If the disc is not provided, the cost is $20 plus the cost of the disc provided by Greazy Dyes based on availability. Multiple discs affect the price of shipping and total production time.
Can you use Rit dye to dye disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too."
How long does it take lotion to dye discs?
How long do you let the disc sit in the bed? This really depends on a couple of different factors. Mainly what type of plastic are you dyeing, and what type of dye or dye mix are you using. A very general answer is about 8-12 hours for Star-like plastics and 24-48 hours for Champion-like plastics.
How do you use lotion to dye discs?
0:131:53Lotion Dyeing Method | ARIA Disc Dye - YouTubeYouTubeStart of suggested clipEnd of suggested clipFun when laying down your disc make sure you press down in the middle of that disc just so you don'tMoreFun when laying down your disc make sure you press down in the middle of that disc just so you don't get any air bubbles in the middle. And then push the rest of the disc down into the lotion.
Can I dye a disc twice?
Yeah, you can double dip. It depends on how dark you want or need your stencil as to whether or not the tye dye will bleed through.
Can you spray paint a disc golf disc?
The problem with spray painting is the texture comes out poorly and uneven. Plastic is not a good "canvas" for spray paint. Frankly, it looks like garbage. Forget about throwing it, since that adds to reduced flight characteristics...and it's an illegal disc.
Can you dye colored discs?
The color of the disc can change the dye color pretty significantly. Of course lighter color discs will have less effect but remember that dye, no matter how long you expose it to the disc, is translucent.
About The Tutorial
- Here's everything you'll need to dye your first disc golf disc: 1. A disc 1. White discs are best when first starting disc dyeing as they take the color of the dye most easily. 2. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, an…
Setting Up The Dye
Stencil Dyeing
Shaving Cream Dyeing
Final Words
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
The Process
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
The Methods
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
The Prep
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.
Let’s Get to It!
- A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains! Before you begin, know exactly what design you want and have your design setup ready to go. An ideal set up would be pie tins under the disc to catch all the die that spills off th…
Taking Care of Your Dyed Discs
- There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look. Below we’ll take a look at some of the most popular methods for dyeing discs. Adhesive Vinyl Decal/Stencil Dye:An incredibly popular method, this method lets you really put y…