Measuring Your Clubs in Five Steps
- Use a forty-eight-inch sturdy straight edge aluminum ruler. ...
- Don’t use your workbench to measure the golf clubs. ...
- The straight edge should be placed so that the corner is touching the ground. ...
- The straight edge should be pressed as close as possible to the shaft. ...
Can I adjust the length on my own golf irons?
Length can be made-to-measure with new golf irons and can be adjusted on your own golf irons. Not all brands will have the same ‘standard’ length.
What size golf clubs do I Need?
There are two measurements that you need to take before shopping for a golf club. The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance.
What is the average length of a golf iron?
Typically, this range is between 34 inches and 40 inches (depending on the brand). As you can see, 3-iron and 2-iron are the longest in the set. Generally, the difference in length among irons is about half an inch. This means wedges are only slightly shorter in comparison to 9-iron.
Should my single length irons be the same size?
Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.
How does length help in golf?
Getting the right length can prolong your golfing career and help you hit the ball longer by improving your ball striking. Better ball striking also means more consistent carry distances.
Why do golf clubs need to be changed?
The clubs can be made or changed to allow you to swing freely. Good posture can give you the best chance of making proper contact with the ball.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
What is the sloping scale for golf?
Most charts have a sloping scale for the height and wrist-to-floor, with player’s height on X and wrist-to-floor height on Y. These two measurements combined give the club length and a lie angle for irons to test.
How to find the right golf club size?
Another way to find out the right golf club size for you is through a dynamic fitting. This is a more precise way of fitting and involves the use of a launch monitor to help determine the correct shaft and head to best suit the golfer.
What is a golf club fitting?
The first type of golf club fitting is a static fit , and as the name suggests, this is a static measurement taken from your finger tip or wrist to floor, trying different lie angle heads and then taking a glove measurement to determine the size of grip required by the golfer. Static fittings are more for golfers with little or no experience and, although not overly reliable, a fitting for length and grip size are better than no fitting at all.
How long is a driver shaft?
In theory, the longer the driver shaft length, the greater the shot distance. Therefore, the longer the driver the better, right? Well, the reality is actually quite different. Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is ‘only’ 44.5 inches, while the average driver length in golf shops is about 45.5 inches.
What are the factors that are taken into account during a golf fitting?
During the fitting, factors such as ball speed, spin rate, dispersion and launch angle are taken in to account and will help to make sure that the golfer purchases the correct equipment to best suit their game.
What is the importance of accuracy when buying a putter?
When it comes to purchasing a putter, control and accuracy are imperative if you want to get the ball into the hole with the first – or at least with the lowest number of strokes possible.
Is golf expensive?
Golf can be an expensive game to get stated and cheaper options do exist in the form of golf essentials like package sets and second hand golf clubs. However, buying the wrong club can make it even more expensive. So make sure that whatever you buy it’s the correct option for your game.
Does size matter in golf?
When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.
How to choose a golf club size?
Go with what feels right. There's no ideal size. Even the "custom" numbers are less important than what you feel comfortable playing. If you're going to invest in an expensive set of clubs, make sure you enjoy playing with it.
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
What shafts do you use for a swing?
In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons. People with slower swings are more likely to prefer flex shafts on the woods and graphite shafts on the irons.
How to remove steel shafts?
All types of shafts need to be tip prepped, ferrules applied and then epoxied to the head. It is not expensive to have this done by someone who is experienced and already has the necessary equipment (recommended) unless you would like to take club building up for a hobby and purchase a lot of equipment like I did and the wife does not appreciate.
How to improve your golf game?
If you're not sure of your handicap, a basic description of your skill level can go a long way in helping the fitter match you with the right kinds of clubs that will help improve your game.
How to test if a golf club is shortening?
At the grip end. You can test the results before cutting the shaft by choking up on the club by 1 inch to see if shortening the club is going to improve your game.
How to buy name brand golf clubs?
If you are considering purchasing name-brand golf clubs, go to a dealer for a professional fitting. The price of custom-fitted clubs will run much higher than a standard boxed set off the shelf.
How to measure the length of a golf club?
Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
How to tell if a golf club is a standard length?
Determine if the club conforms to length standards. If the scale reads 0.0 or less, the length is less than 48.0 inches (122 cm) and conforms to the club length standard. If the scale reads greater than 0.0, the length is greater than 48.0 inches (122 cm) and it does not conform to the club length standard. Such a club could not be used in a professional golf game.
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
How long should a golf club be?
If you plan to play in a professional golf game, you’ll need to ensure your clubs conform to the club length standard of 48.0 inches (122 cm) or less. Measuring golf clubs might seem like a complicated task, but it’s actually pretty simple. You can measure the clubs yourself with a tape measure, or use a golf club measurement apparatus to determine if the clubs conform to length standards.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
What Are Standard Length Golf Clubs?
As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What does "impaired" mean in golf?
It impairs the ability of a golfer to translate his/her weight during the swing.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How to measure golf clubs?
Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?
According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.
How many inches is a three wood?
Three Wood: This club measures in at forty-two inches, which is two inches shorter than other types of woods.
What should be taken into account when buying a new golf club?
When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.
How to tell the length of a golf shaft?
The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
