
The "hosel" is the place on a golf club where the shaft is connected to the clubhead. Typically, the hosel is part of the clubhead, and the shaft slides into the hosel and is secured with epoxy. Clubs are comprised of three basic parts: the clubhead, the shaft and the grip.
What is a hosel in golf shafts?
Think of the hosel as the "socket" that the shaft goes into. The entry point at the top of the hosel is sometimes covered by a black, plastic ferrule, which simply serves to hide the connection point between shaft and clubhead. Do Most Golfers Need to Care About the Hosel?
Can you bend the hosel on a golf club?
(The vast majority of golf clubs still have traditional, fixed hosels.) Many standard hosels are bendable by a clubfitter. Bending a standard hosel is most commonly done to change lie angle. Also, if you are a do-it-yourselfer and want to try replacing the shafts in your clubs yourself, you'll be dealing with the hosel in doing so.
Do you know what a hosel is?
Knowing what the hosel is is more about just knowing how your golf clubs are put together and what the various parts are called. Good knowledge to have, but not necessarily practical knowledge for most golfers. (Most golfers never tinker with their clubs, rebuild them, repair them or attempt to change the specs.) There are exceptions, though.
What happens when you heat the hosel of your golf clubs?
Speaking of heating the hosel: Exposing your golf clubs to certain high-heat environments can weaken the epoxy inside the hosel, causing the shaft to loosen over time. More Facts About the Humble Hosel The weight of the hosel is part of the overall weight of the clubhead, and weighting properties of golf clubs impact performance.

What's the hosel on golf club?
The "hosel" is the place on a golf club where the shaft is connected to the clubhead. Typically, the hosel is part of the clubhead, and the shaft slides into the hosel and is secured with epoxy.
What is the purpose of a ferrule on a golf club?
First of all, the golf ferrule is the black piece located just above the club head's hosel. The purpose of a ferrule is to provide a smooth transition from the top of the hosel into the shaft. For the most part it is to provide a nice cosmetic element to the golf club.
How do you fix the hosel on a golf club?
4:558:52LOOSE FERRULE / The EASIEST Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxyMoreNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxy really it doesn't have to be golf. Specific it can be any two-part epoxy.
How do I know what size hosel to get?
If you're not sure what the hosel ID is, you can measure it with a fine tip gauge or contact the club manufacturer for this information. On the opposite side of the shaft is the butt end. This is the side where the golf grip will be installed. The butt diameter is measured about 2" down from the top of the shaft.
Can you use a golf club without a ferrule?
Does Every Club Need Them? Almost all modern clubs are designed to require a ferrule. Any club that has a clubhead with a neck that ends abruptly, almost all clubs have this, require a ferrule. Some older clubs have a tapered neck which means they fit the shaft in a really flush way.
Are ferrules necessary?
Ferrules greatly reduce the contact resistance between the wire and connector, and even help cut down on the oxidation in the strands because of the lack of air space between them.
How much does it cost to replace ferrule?
Remove Rattle: easy fix -- $5.00 / hard fix -- $20.00. Replace Ferrule -- $12.50. Repair Ferrule -- $5.00.
What are the parts of a golf club called?
A golf club is made up of 3 components: the clubhead, the shaft, and the grip.
How do you ferrule a golf club?
12:1528:30How to install Ferrules on Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipInstalling tool if you go to a club making website or some golf shops you'll see these. It'sMoreInstalling tool if you go to a club making website or some golf shops you'll see these. It's basically a way to fit the ferrule onto the shaft.
What tip size are Callaway irons?
0.370”This is by design as Callaway starts out by using a 0.370” parallel tip shaft. Callaway's hosels are slightly tapered so that when the shaft is inserted it pinches in the split shaft and forms a pseudo-mechanical lock.
What is the proper golf grip?
5:379:50How to Properly Grip Your Golf Club | GOLFPASS | Golf Channel - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe line there the lifeline. Of my right hand that is going to sit on top of the thumb of my leadMoreThe line there the lifeline. Of my right hand that is going to sit on top of the thumb of my lead hand. And there's another v there you can see it yes and that's also pointing to my trail shoulder.
How do you clean a golf hosel?
Soaking the industrial strength cotton swab hosel brushes in acetone or mineral spirits and inserting into the club head hosels will clean out any oil or epoxy residue that may negatively affect the new epoxy bond during assembly. All brushes are threaded and can be used with the same universal wooden handle.
Where is the hosel on a golf club?
Located at the top of the clubhead, the hosel is the hollow section onto which the club shaft is inserted. It serves as the bonding point between the club shaft and the clubhead and is sometimes referred to as the neck, or the socket.
What happens when the club heads separate?
When this occurs, it usually happens during a golf swing after the club strikes the ball and the ground. If this type of damage were to occur to several clubs in a set it may point to a manufacturing defect or a worse to a sign ...
Why does my golf ball shank?
Although there are competing theories, it is believed that shanks are caused by balls hitting the hosel of the club, sending it way off target. As a result, a golfer will be smart to try and avoid placing his golf ball too close to the hosel, keeping the ball away and centered on the sweet spot instead.
What is the hosel on a putter?
The sheer variety of putter specs — everything from head size, shape and weight to shaft length and grip size and style — can be daunting. But the first thing you may want to consider when shopping for a new flatstick is the hosel. Why? This humble hunk of metal is the only connection between the shaft and the clubhead, which means that it largely dictates the balance and release pattern of a given model.
When you balance the shaft of a face-balanced putter on your finger, should the clubface point?
TIP: When you balance the shaft of a face-balanced putter on your finger, the clubface should point to the sky.
What is a no bend shaft putter?
Putters with a no-bend shaft in the middle of the putterhead are typically (but not always) face-balanced and thus more useful for straight-back, straight-through strokes.
Does GolfLogix make you a better putter?
GolfLogix has always made you a better player. Now it’ll make you a better putter. TIP: These models typically feature some degree of “toe hang”—in other words, when the shaft is balanced on your finger, the toe points more toward the ground. An example of a short putter hosel.
What are the parts of a golf club?
The head of the golf club has several parts: the hosel, where the head connects to the shaft; the face, which actually strikes the ball; the sole , which is the part closest to the ground; and the back, which is on the side opposite the face.
What does the number on a golf club mean?
The number is related to the angle at which the face slopes back from vertical when the club is held in its normal position facing the ball. A higher number for the club represents a greater degree of slope away from vertical, generally resulting in a higher, shorter shot. There are some slight variations between manufacturers, but the club numbers and their related slopes generally look like this.
How does a golf ball spin?
In the 450 millionths of a second that the ball and club are in contact the ball does several things. First, it deforms quite a bit, flattening against the face of the club. As the ball begins to rebound to its normal globe shape, it starts to slide up the club face. Finally, just before it leaves the club, the ball returns to its familiar shape and begins to roll up the face. By the time the ball has left the club face, it is spinning quite rapidly. According to the USGA, a ball hit by a wood or one of the longer irons (3 to 5) will be spinning at approximately 3,600 RPM when it leaves the club. The same ball struck by a pitching wedge will spin at nearly 6,000 RPM when it leaves the club.
Why do golf clubs have grooves?
First, they provide just a bit of "bite" for the golf ball as it's sliding up the face, helping it to spin more rapidly. Next, if grass is trapped between the ball and club at impact , the water in the grass will be squeezed out by the nearly 3,000 pounds of force generated by the average swing . Like the tread on an automobile tire, the grooves on the club face give the water somewhere to go so that the ball doesn't skid up the face without spinning.
Why is a golf ball spinning?
A spinning golf ball is a good thing because the rapid spin provides aerodynamic lift, causing a spinning ball to travel higher and farther than one with no spin at all. The spinning ball is also less influenced by small gusts of wind, making for a more predictable shot. One of the other features you will notice on the face of a golf club, ...
Why are offset clubs called hosel clubs?
Such clubs are also called offset hosel clubs because the hosel -- the area where the shaft fits into the club head -- is the part that’s actually bent to set the club face behind the shaft.
What is offset club head?
The main purpose of an offset club head is to help players who tend to slice. One way in which the offset helps to limit or cure the slice is by moving the club head’s center of gravity farther from the shaft. Former “Golf Digest” equipment editor Peter Farricker explained that the farther the center of gravity is from the shaft, ...
Why offset clubs?
By pushing the club head a bit farther back from the shaft line, an offset club also helps to limit slices caused by open club faces because its structure “gives the head a little more time for the club face to square up at impact ,” says PGA professional Don Trahan.
Can offset clubs be used as crutches?
Some golf professionals worry that by using an offset club as a crutch to cure a slice, a player either won’t improve his swing and learn how to square the club face on his own, or he will improve his mechanics, in which case the offset may turn the cured slice into a bad hook.
How much offset does a golf club have?
How much offset any give golf club has is entirely dependent on the manufacturer and the target audience for a club. Clubs aimed at better golfers have less offset (or even none); clubs aimed at higher handicappers have more offset. Within a set, the longer clubs (in terms of shaft length) will likely have more offset, if it is present, while the shorter clubs (short irons, wedges) will have less.
Why offset golf clubs?
Those two benefits of an offset design are that it can help a golfer square the clubface for impact, improving the odds of a straight (or at least not a sliced) shot; and it can help a golfer get the ball up in the air. Better golfers don't necessarily need help with those things, so golf clubs designed for low-handicappers don't necessarily ...
How does offset help golfers?
In other words, offset can help a golfer come closer to squaring the face at impact because the clubface arrives at impact a split-second later than with a club that has no offset. So this benefit of offset is to help reduce the amount the golfer may slice or fade the ball."
What is offset golf?
"Offset" is design feature in golf clubs that was first a feature specific to game-improvement clubs but is now found in most irons and many woods and hybrids. When the leading edge of a clubface is set back from the hosel or neck, the club is said to have "offset.".
Do longer clubs have more offset?
Within a set, the longer clubs (in terms of shaft length) will likely have more offset, if it is present , while the shorter clubs (short irons, wedges) will have less. Club makers often list the amount of offset on their websites or other marketing materials under the "Specifications" label.
What is offset golf?
Tom Wishon founder of Tom Wishon Golf Technology and one of the world’s finest clubmakers says: “Offset is a design condition in clubheads in which the neck or hosel of the head is positioned in front of the face of the clubhead, so that the clubface appears to be set back a little from the neck ...
What does SFT mean in golf clubs?
In fact, SFT stands for “straight flight” so they are putting it right there in the brand name, thankfully it works. PING are among the best engineers in golf and this is another great product from them.
Why offset golf club at impact?
An offset helps you achieve this as you are learning how to play.
Why is offset important in golf?
An offset helps you achieve this as you are learning how to play. This feature increases the chances of you getting your hands to the ball before the club and reduces thin shots. It helps you present the face of the club nicely and should give you better ball-striking.
When you switch to non offset golf clubs, do you need to start getting your hands into a more aggressive position at?
When you make the switch to using non-offset golf clubs you need to start getting your hands into a more aggressive position at impact. At first you may hit a few weak and “slappy” shots because you have lost a feature that you may have relied on. You will get used to it, don’t worry, just practice.
How to get better at golf with less offset?
Try to practice a lot on the clubs with less offset, the shorter irons 8-PW. These will let you see if your swing is starting to improve with less influence from offset which is key to becoming a better golfer.
