Golf-FAQ.com

what length golf clubs do i need

by Cicero Spinka PhD Published 2 years ago Updated 2 years ago
image

1. Measure Your Overall Height (i.e. “static” fitting)
OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS
5'4″ to 5'7″minus 1/4″
5'7″ to 6'1″standard length in inches
6'1″ to 6'2″plus 1/4″
6'2″ to 6'4″plus 1/2″
7 more rows

How to get the right shaft length for golf clubs?

Go to a club fitter to get the right shaft length for you and ensure your clubs, especially your irons, have the correct lie angle for you. When you are still learning the game of golf or continuing to improve, then expect to change your clubs as your handicap drops.

How long is a golf club shaft?

The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style.

What is the angle of a golf iron?

The lie angle is the angle between the shaft and the ground as measured when you are in a normal playing position with the sole of the club on the ground . These lie angles vary from club to club and from manufacturer to manufacturer, lie angles are about fifty-three to fifty-six degrees in drivers, about sixty-five degrees in the short irons and over seventy degrees in a putter; which is best for you will be partially dependent upon your height and the relative length of your arms. What you are looking for is a club which when you hold naturally has its sole flush to the ground. If you find you have to change your posture to make this happen, then adjusting the lie angle of your club may help.

What happens if your putter is too short?

If your putter is too short, you will get too close to the ball, and this can mean the heel of your putter lifts off the ground, and you will not hit the ball well. The shaft length on your putter should enable you to get your eyes directly over the ball just before you take your shot.

How many inches to add to standard length?

Between 6 feet 6 inches and 6 feet 9 inches – Add one and a half inches to the standard length.

How long is a standard length?

Between 5 feet 9 inches and 6 feet – You will be suited to a standard Length. Between 5 feet 6 inches and 5 feet 9 inches – Subtract half an inch from the standard length. Between 5 feet 3 inches and 5 feet 6inches – Subtract one inch from the standard length.

What happens if you put too long on a putter?

If a putter is too long, you will compensate by standing too far back from the ball, which will spoil your eye contact. It is also probable that you will push your elbows to your side, and this will mean you will not be able to make the natural pendulum move which good putting entails.

How long should a golf club be?

The most common method used to recommend the length of a golf club is a "height-based" chart. Golf clubs are usually available in two primary lengths (excluding juniors) and somewhat based on statistics, like the average height of an average male and female. The average woman’s height in the U.S. is approximately 5’ 5” (165.1cm), with about 68% between 5' 2" and 5' 7". The average male is approximately 5' 10" (177.8cm) with nearly 68% between 5' 6" and 5' 11". The difference between the finished stock men’s and women’s clubs is usually 1" difference in the length.

How tall is a 5'10 golfer?

In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.

What is the average lie angle for a 5 iron?

A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.

Does a 1" increase in length make a golf club longer?

For taller individuals, it is logical to assume longer clubs are recommended. But it should be noted that a 1" increase in club length does not necessarily make the club 1" longer from the floor to the ground. It is the sin of the lie angle that is the length component in the vertical direction.

Can a man buy jeans based on height?

For example, a man does not purchase jeans based upon their height, rather two important pieces of information. If that person knows what their waist and inseam measurements are, they can purchase a pair of jeans that will most likely fit (but not always) without having to try them on.

Golf Club Size Guide: How to Choose the Right Size

In order to select the right size golf clubs, you need to consider some factors, the most important one being your height. To account for this, manufacturers design golf clubs in various sizes.

Golf Club Size Factors To Consider When Choosing New Clubs

The loft angle is the angle that falls between the ground and clubface. It determines the trajectory of the golf club. A higher loft angle indicates a higher trajectory but a shorter distance. A lower loft angle will have a lower ball trajectory but more distance.

Driver Length For Shafts (How to Choose the Right Driver Length)

If you’re a beginner golfer, your driver shaft is probably too long. That can make it difficult to hit the golf ball solidly at impact, causing you to miss more fairways than you want. It’s no wonders tour pros find it easy to consistently get distance off the tee. Their driver shaft length is shorter and just at the right length.

Iron Length For Shafts (Club Length Chart)

When selecting a club iron, the right shaft length is extremely important. The length of the club and shaft should match your height and posture so as to make the game more enjoyable while making you a better golfer. Your skill level, swing style, and swing speed should tally with the club you’re playing with.

How to Choose the Proper Wedge Length For Shafts

Wedges are some of the most played clubs on the golf course and most golfers carry three, including pitching, sand, and gap wedge. If you’re looking for a new set, you need to consider your skill level and body size, so you can choose the right wedge size. Here is a guide on how to do that:

Woods Length For Shafts & Our Recommendation

The most common fairway wood on the golf course is 3-wood and 5-wood. 3-wood clubs come with a standard length of 43″ while 5-wood clubs have 42″. The right size and length of wood for each golfer are different.

Putter Length For Shafts (And How to Measure Putter Length)

When putting, you want to make sure you feel comfortable. If you’re holding your putter and it doesn’t feel right, you won’t be able to putt well. You also want to make sure that your eyes are over the ball. That’s what the right putter length will do for you.

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

What happens if you play too long in a golf club?

If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.

Why are golf clubs made the way they are?

The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.

What happens if your woods aren't longer?

If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.

Why do you have to swoop on your golf club?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.

When shortening a golf club, do you have to remove the crown?

When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.

Does golf club length matter?

Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.

How do I know what size golf clubs I need?

Clubs are matched to your height and the distance between your hands and the ground. To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.

Is it better to have longer or shorter golf clubs?

It doesn’t matter how tall you are if you have a deeper crouch in your swing because your wrists will then be closer to the ground, which means you need slightly shorter clubs. Arm length and wrist to floor length are what truly determines how long the shaft of your golf clubs should be.

What size is a standard length golf club?

Golf Club Size Guide: Driver Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is ‘only’ 44.5 inches, while the average driver length in golf shops is about 45.5 inches.

How long is a standard 5 iron?

With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches.

How long should golf clubs be for 6 2?

For example, for a golfer that stands 6’2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.

What is the standard length of an 8 iron?

What is the standard length of an 8 iron? The standard club length of an 8- iron is between 35.5” to 37”.

Do taller golfers need longer clubs?

Your Height The most basic reason that you would need longer golf clubs is that you are taller than standard height. If you are taller than about 6’0”, you will likely need clubs that are a bit longer than normal.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

What is plus and minus golf clubs?

The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...

What is the second measurement of a grip?

The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.

Can you play golf with an off size club?

Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

Why are golf clubs not fitting?

Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

Why is playing with clubs too short bad?

Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.

What happens if a golfer has a short club?

If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.

What is the most important factor in creating distance with the driver?

However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.

Does a longer shaft mean faster club head speed?

A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.

What is the correct putter length?

When asking what length golf clubs to use, factoring in posture and wrist-to-floor measurements, most golfers usually end up with a putter between 32-35″. To have the best chance of establishing the correct putter length for your personal set-up, ...

Why use one length irons?

All that being said there is an added element of using one-length irons too which have become increasingly popular because of Bryson DeChambeau. One-length irons allow you to stand to the ball in the same way regardless of the iron you’re using, in theory helping with consistency of strike and club speed.

Does shaft length increase clubhead speed?

As shaft length increases so clubhead speed also increases. However, as shaft length increases it is common for players to struggle to deliver the club as consistently, making it more difficult to make solid contact.

Does a shortened shaft make the flex softer?

As shaft length increases, so does the weight. Increasing the length also alters the shaft’s flex; adding length makes the flex softer, while a shortened shaft will play stiffer, so you’ll need to bear this in mind. Collapse Best Golf Hybrid Clubs.

Does a putter have to be upright?

Consequently, your putter path and shaft will be more upright. The heel of your putter could also lift off the ground causing it to aim right. As you can see, there is plenty to think about when considering what length golf clubs to use. Don’t forget to follow Golf Monthly on Facebook, Twitter and Instagram.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9