- Dip the towel in your warm bucket of water and soap
- Rub the grip down using the wet towel
- Dry the grip using a fresh towel
- Set the clubs outside of your bag and allow the grips and shafts to fully air dry
Full Answer
How do I clean the shafts of my golf clubs?
Appropriate metal or wood polish. To soften the dirt, soak the clubs in a bucket containing warm soapy water. The soap-water solution should not be too warm and only deep enough to submerge the club heads (but not past the hosel). Warm water might loosen the ferrules, seep into the joint, and create rust spots that will eventually damage the shaft.
What type of water should I use to clean the shafts?
Lukewarm water is recommended for the best results. Too hot of water and you run the risk of softening the ferrules to where they might slip on the shaft. Too cold of water…
How to prevent rust on golf club shafts?
To prevent rust from happening again, you should make sure your golf club shafts always stay dry. People think about cleaning club heads and grips, but they don’t pay much attention to the shafts. If water sits on the shaft, it will eventually start to rust it.
Can soap water damage golf shafts?
The soap-water solution should not be too warm and only deep enough to submerge the club heads (but not past the hosel). Warm water might loosen the ferrules, seep into the joint, and create rust spots that will eventually damage the shaft. I’ve seen two driving range accidents where shafts broke by the joints to the club heads.
What you need to clean your golf clubs
You don’t need anything fancy to clean your golf clubs, in fact, you probably own everything you’ll need.
Cleaning Irons and Wedges
Cleaning your irons is a no-brainer since it will help you maximize your distance, and increase spin off the club, resulting in softer shots and better results.
Cleaning Hybrids, Fairways, and Drivers
While most golfers nowadays are hitting with metal golf woods, the following instructions will work even if you’re hitting wooden golf woods.
Cleaning Grips and Shafts
It’s crucial to keep your grips and shafts clean since they can hinder performance quite a bit.
Keeping your clubs clean on the course
One of the best ways to keep your clubs clean throughout a round is keeping a brush and towel attached to your bag, and wiping down your club after each shot.
Final Thoughts
Hopefully, after reading this article, you’ll know everything you need to know so you can effectively clean your clubs and keep them in great shape.
What do you need to clean a shaft?
Now you will need to get all the supplies for cleaning your shafts. You will need soap, water, a few rags, vinegar, and a towel. Sometimes you will end up needing a rust remover, but this is not always the case.
How to prevent rust on golf club shaft?
To prevent rust from happening again, you should make sure your golf club shafts always stay dry.
How to get rust off golf clubs?
Depending on how long the rust has been on the golf clubs, it may come off with just soap and water.
What color are golf wedges?
Some wedges are going to be black in the finish; others are blue and darker silver as well. The idea of letting your wedge rust so that you can see things better has started to fade with the introduction of these other colored club heads. You may even see some tour players with some rust on their wedges.
Why do golf clubs rust?
A few reasons for this include the amount of use the wedges get, the sand and dirt they are exposed to, and the thicker wet grass.
Why do you need a towel for golf clubs?
Having a towel Is a big part of making sure your clubs stay in excellent condition.
Do golf wedges rust?
Some golf wedges are even designed to rust after a few rounds.
What to use to clean a golf club?
Dish Soap – A washing detergent is essential to removing stubborn stains from your club. I recommend liquid soap – it makes the wiping process easy. However, avoid using heavy detergent or bleaching agents as they can affect the texture and color of your equipment. Scour Pad – An appropriate sponge should do the trick.
How to clean graphite shaft?
In the case of graphite shafts, avoid solvents to protect the delicate polyurethane encasing . A dampened cloth is appropriate in this case.
Why are my grips so slippery?
Your grips can easily be neglected causing dry, hard slippery pieces of rubber. The accumulated sweat, dirt, hand lotions, and even chocolate can, over time, reduce the traction of your hands during play. You have a couple choices here. One being to purchase the ProPlay Club Grip Cleaning Wipes, or DIY to the rescue and to get a grip tacky, the process is:
What happens if you divot your golf club?
Without good cleaning habits, the divot debris on your golf club heads will decrease spin rates of the golf ball. Therefore, regardless if you’re a beginner or scratch golfer cleaning your clubs should be routine!
How to clean rubber grips?
Wash conventional rubber grips with a soft bristle brush and hand soap. If you find this to be too tedious, window cleaners like Windex and Glass Plus can offer quick and effective ways to maintain a clean grip.
What is the best sponge to use to wipe a golf club?
Scour Pad – An appropriate sponge should do the trick. A soft one lets you hold enough water as you wipe your club without wasting too much soap in the process.
What kind of polish should I use for a golf club?
Polish – Depending on the design of your golf club, you will need either a metal (chrome or steel polish) or wood polish.
How to clean a club head?
Remove your clubheads from the water, one by one, ready for cleaning. Grab a soft bristle brush and scrub all over the head. Forged irons are generally pretty resilient to soft bristles, so you needn’t worry about scratching the metal. Make sure you get into each of the grooves.
Why do you need to clean golf irons?
The cleaning of golf irons is often overlooked, but it’s a process that is essential for preserving your clubs and optimizing their performance. We spend a lot of money on our irons, so it makes sense to take proper care of them.
How to keep irons clean?
Keeping your irons clean comes in two parts: giving them a quick once over as and when you use them on the course, and giving them a proper scrub with warm water and soap back at home. You don’t need to do it every time you play – only when they’ve become noticeably caked in mud.
How to clean a rusty iron club head?
Once all the dirt has been brushed off, rinse off the clubhead with water. Try to avoid getting water onto the hosel and shaft. With all the soap rinsed off, dry the iron head with a towel. Make sure you leave it bone dry, as any lingering dampness could lead to rust.
Why is it important to keep irons clean?
Performance aside, keeping your irons clean is vitally important for their longevity. If they are always dirty, they are more likely to develop rust and other issues which could lead to club breakage.
How to clean metal with soap?
Fill a bucket with warm water, adding a couple of teaspoons of liquid soap. Make sure the water’s not too hot, as it could damage the metal (and burn your hands!).
Do you wash your golf clubs?
Many golfers literally never wash their clubs. It really depends on how often you play, how mucky your course is, and how serious you take your golf. As we’ve already discussed, having dirty irons can have a big impact on your performance, so ideally, they should always be spotless. But for most people, cleaning clubs after every round just isn’t ...
How to get dirt off golf club head?
During a swing, ball contact with the grooves creates friction that results in ball spin, consistent flight, and greater distance. Use the scouring pad and brush on the club head to remove the dirt.
How to clean a golf iron?
Clubs can leave a mark or even cause a scratch. Prepare the following: Plastic bucket with moderately warm water. Dish soap. Scouring pad.
How to soften rust on golf clubs?
To soften the dirt, soak the clubs in a bucket containing warm soapy water. The soap-water solution should not be too warm and only deep enough to submerge the club heads (but not past the hosel). Warm water might loosen the ferrules, seep into the joint, and create rust spots that will eventually damage the shaft.
What is the purpose of a tight grip on a golf club?
A tight grip prevents the club from reaching full speed during the swing and can cause hand injury. Cleaning the grip used to be as simple as using a scouring pad/brush and soapy water to scrub away dirt and sunscreen residue. That is not 100% applicable anymore.
What brush to use for rusty club heads?
If the rust is more stubborn, use the copper brush. The last option is the metal brush because of the possibility that it can scratch the chrome plating of the club head.
Why does my golf ball fly differently?
You wonder why the ball flew differently from your intended direction. The culprit might be mud sticking into your club head and/or ball. Normal golf rules allow balls to be marked, lifted, cleaned and returned to its original location. This is to keep mud from sticking to the ball and affecting its flight.
When should you clean your grips?
Clean your grips after every game and/or whenever you feel it becoming less tacky.
How to shine golf clubs?
Polish each club with the metal polish and a clean cloth. Polish in a circular motion, then buff each club until it shines.
How to get rid of rust on golf clubs?
Scrub the rusty parts of each club vigor ously with the lemons.
What are golf clubs made of?
Some club materials are prone to rusting. Most golf clubs are made from a combination of steel and titanium. This makes for a great club, but these materials are prone to rusting. Naturally, you want your clubs to look as good as they possibly can, and that means removing any rust.
How to remove rust from golf club shaft?
Step 1. Dampen a rag and rub the club shaft anywhere that rust has formed. The rag will remove loose, flaked rust to help you see how much rust is sticking to the shaft.
What does it mean when a golf club shaft rusts?
When a golf club's iron shaft develops rust, this issue doesn't mean the club is no longer worth keeping. It does mean, however, that the problem requires your immediate attention. Because rust spreads over time, address the situation quickly to restore the club to its original appearance. If your clubs are rusting frequently, examine how you use ...